自适应优化控制的人工髋关节磨损三坐标测量及评估方法

彭希锋 1; 王玲 1; 杨文剑 1; 赵元一 2; 李涤尘 1; 靳忠民 1; 3; 樊铂 4; 董双鹏 4; 张述 4

doi:10.7652/xjtuxb201408022

您当前的位置：

首页 >

文章列表页 >

自适应优化控制的人工髋关节磨损三坐标测量及评估方法

更新时间：2025-07-09

- 自适应优化控制的人工髋关节磨损三坐标测量及评估方法
- Optimized Adaptive Control for Evaluation of Artificial Hip Joint Volumetric Wear by Coordinate Measuring
- 西安交通大学学报 2014年48卷第8期页码：128-135
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2014-01-06。作者简介: 彭希锋(1987—),男,硕士生;王玲(通信作者),女,副教授。基金项目: 国家科技支撑计划资助项目(2012BAI18B00,2012BAI22B01);中央高校基本科研业务费专项资金资助项目
- DOI：10.7652/xjtuxb201408022
  中图分类号： Q819
- 网络首发：2014-08-10，
  
  纸质出版：2014
- 稿件说明：
移动端阅览
彭希锋 1, 王玲 1, 杨文剑 1, 等. 自适应优化控制的人工髋关节磨损三坐标测量及评估方法[J]. 西安交通大学学报, 2014,48(8):128-135.

Optimized Adaptive Control for Evaluation of Artificial Hip Joint Volumetric Wear by Coordinate Measuring[J]. 2014, 48(8): 128-135.
彭希锋 1, 王玲 1, 杨文剑 1, 等. 自适应优化控制的人工髋关节磨损三坐标测量及评估方法[J]. 西安交通大学学报, 2014,48(8):128-135. DOI： 10.7652/xjtuxb201408022.

Optimized Adaptive Control for Evaluation of Artificial Hip Joint Volumetric Wear by Coordinate Measuring[J]. 2014, 48(8): 128-135. DOI： 10.7652/xjtuxb201408022.

摘要

针对目前三坐标测量在人工髋关节磨损评估上重复测量误差较大和准确性不高的突出问题

提出了一种自适应优化控制的人工髋关节三坐标测量及磨损评估方法。该方法包括臼杯表面采样点云分布的磨损自适应设计

测量点触测矢量的优化控制以及构建相同体积计算区域

并使用超高分子量聚乙烯(UHMWPE)髋臼杯对该方法进行了验证。研究结果表明:与非相同体积计算区域方法相比

在低于原来一半的测量成本下

体积评估重复性偏差减小了49.3%; 与随机的触测矢量方法相比

在同样的点密度下

体积评估精度提高了32.4%～46.7%; 该方法的磨损评估结果与称量法对照

表现出了有效的相关性(R

=0.922 8); 与称量法相比

该方法表现出磨损分布统计分析能力

为人工关节磨损分析和研究提供了更多的信息。

Abstract

Compared with the gravimetric method

geometric method in terms of coordinate measurement(CMM)is endowed with advantage of direct determining wear volume and distribution on the articulating surfaces of artificial hip prostheses. The current volumetric measurement usually requires more measuring points and computational cost to surpass the limitations of bad repeatability and low accuracy. A new method of CMM measurement is proposed for collecting density of data adapted to the surface profile of worn area

controlling and optimizing probe contact angle and reconstructing calculative socket on the same region with better measuring accuracy and relatively lower calculating cost. UHMWPE cups are chosen to validate this approach. The results

show that the repeatability error of volume evaluation is reduced by 49.3% with half as much as measurement cost for previous method and the accuracy is improved by 32.4%-46.7%

a correlation(R

=0.922 8)exists between the new method and gravimetric method

showing its effectiveness

and the developed method enables to reconstruct the worn surface with detailed distribution.

关键词

Keywords

references

SAGBAS B, DURAKBASA M N. Measurement of wear in orthopedic prosthesis[J]. Acta Physica Polonica: A, 2012, 121(1): 131-134.

崔长彩, 蒋向前. 人工关节磨损测量方法综述[J]. 湖北汽车工业学院学报, 2008, 22(4): 33-37.

CUI Changcai, JIANG Xiangqian. Measurements methods of artificial joints wear[J]. Journal of Hubei Automotive Industries Institute, 2008, 22(4): 33-37.

DEBYSHIRE B, HARDAKER C S, FISHER J, et al. Assessment of the change in volume of acetabular cups using a coordinate measuring machine[J]. Proceedings of the Institution of Mechanical Engineers: Part H Journal of Engineering in Medicine, 1994, 208: 151-158.

REINDERS J, SONNTAG R, HEISEL C, et al. Wear performance of ceramic-on-metal hip bearings[J]. PLoS One, 2013, 8(8): e73252.

ORAL E, MURATOGLU O K. Vitamin E diffused, highly crosslinked UHMWPE: a review[J]. International Orthopaedics, 2011, 35(2): 215-223.

JEDENMALM A, NOZ M E, OLIVECRONA H, et al. A new approach for assessment of wear in metal-backed acetabular cups using computed tomography: a phantom study with retrievals[J]. Acta Orthop, 2008, 79(2): 218-224.

JEDENMALM A, NILSSON F, NOZ M E, et al. Validation of a 3D CT method for measurement of linear wear of acetabular cups[J]. Acta Orthop, 2011, 82(1): 35-41.

TUKE M, TAYLOR A, ROQUES A, et al. 3D linear and volumetric wear measurement on artificial hip joints-validation of a new methodology[J]. Precision Engineering, 2010, 34(4): 777-783.

BILLS P, BLUNT L, JIANG X. Development of a technique for accurately determining clinical wear in explanted total hip replacements[J]. Wear, 2007, 263(7): 1133-1137.

MORRIS B, ZOU L F, ROYLE M, et al. Quantifying the wear of acetabular cups using coordinate metrology[J]. Wear, 2011, 271(7/8): 1086-1092.

BILLS P J, RACASAN R, UNDERWOOD R J, et al. Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty[J]. Wear, 2012, 274: 212-219.

RAIMONDI M T, SASSI R, PIETRABISSA R. A method for the evaluation of the change in volume of retrieved acetabular cups[J]. Proc Inst Mech Eng: H Journal of Engineering in Medicine, 2000, 214(6): 577-587.

LORD J K, LANGTON D J, NARGOL A V F, et al. Volumetric wear assessment of failed metal-on-metal hip resurfacing prostheses[J]. Wear, 2011, 272(1): 79-87.

HU X Q, HAN C M, WOOD R J K. A geometric method to measure the wear of hip joint[J]. Wear, 2011, 271(11/12): 2775-2781.

BARBOUR P S M, STONE M H, FISHER J. A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates[J]. Proceedings of the Institution of Mechanical Engineers: Part H Journal of Engineering in Medicine, 1999, 213(6): 455-467.

DEBYSHIRE B, HARDAKER C S, FISHER J. Assessment of the change in volume of acetabular cups using a coordinate measuring machine[J]. Proceedings of the Institution of Mechanical Engineers: Part H Journal of Engineering in Medicine, 1994, 208(3): 151-158.

KADDICK C, WIMMER M A. Hip simulator wear testing according to the newly introduced standard ISO 14242[J]. Proceedings of the Institution of Mechanical Engineers: Part H Journal of Engineering in Medicine, 2001, 215(H5): 429-442.

朱琳,贺健康,刘亚雄,等.琼脂糖/胶原复合水凝胶的制备及性能研究.2013,47(10):121-126.[doi:10.7652/xjtuxb2013 10021]

宿月文,陈渭,朱爱斌,等.分形特征表面接触磨损模拟.2013,47(7):52-56.[doi:10.7652/xjtuxb201307010]

邹创,陶涛,梅雪松,等.机器人关节短筒谐波减速器接触计算与分析.2013,47(5):82-87.[doi:10.7652/xjtuxb201305 015]

王烨,贺健康,刘亚雄,等.三维微流道支架直接压印成形方法.2012,46(10):116-120.[doi:10.7652/xjtuxb201210020]

朱林重,连芩,靳忠民,等.PEGDA水凝胶的光固化成形工艺及其性能评价.2012,46(10):121-126.[doi:10.7652/xjtuxb201210021]

豆增发,高琳.利用膜粒子群优化和信息熵的医学文本特征选择.2012,46(4):45-51.[doi:10.7652/xjtuxb201204008]

肖琪聃,吕振林,张珊珊,等.不同压力下Ti3SiC2陶瓷的干摩擦磨损性能研究.2011,45(2):121-124.[doi:10.7652/xjtuxb201102025]

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

张角凹坑气膜孔对双层壁气膜冷却特性的影响

电子级超纯氮深冷空分流程节能优化研究

水蒸气掺混对氨裂解气旋流燃烧与排放特性的影响研究

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化

结构-语义-残差协同的图像压缩框架：面向隐私保护与高保真重建