表面织构对转子轴承系统稳定性影响的实验研究

王琳; 裴世源; 徐华

doi:10.7652/xjtuxb201403016

您当前的位置：

首页 >

文章列表页 >

表面织构对转子轴承系统稳定性影响的实验研究

更新时间：2025-04-29

- 表面织构对转子轴承系统稳定性影响的实验研究
- Surface Texture Influence on Rotor-Bearing System Stability
- 西安交通大学学报 2014年48卷第3期页码：84-88+114
- 作者机构：
  
  西安交通大学现代设计及转子轴承系统教育部重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2013-07-31。作者简介: 王琳(1987—),男,博士生;裴世源(通信作者),男,博士,讲师。基金项目: 国家重点基础研究发展规划资助项目(2009CB724404,2011CB706601)
- DOI：10.7652/xjtuxb201403016
  中图分类号： TH117.2
- 网络首发：2014-03-10，
  
  纸质出版：2014
- 稿件说明：
移动端阅览
王琳, 裴世源, 徐华. 表面织构对转子轴承系统稳定性影响的实验研究[J]. 西安交通大学学报, 2014,48(3):84-88+114.

Surface Texture Influence on Rotor-Bearing System Stability[J]. 2014, 48(3): 84-88+114.
王琳, 裴世源, 徐华. 表面织构对转子轴承系统稳定性影响的实验研究[J]. 西安交通大学学报, 2014,48(3):84-88+114. DOI： 10.7652/xjtuxb201403016.

Surface Texture Influence on Rotor-Bearing System Stability[J]. 2014, 48(3): 84-88+114. DOI： 10.7652/xjtuxb201403016.

摘要

为了研究表面织构对高速精密机床支撑滑动轴承系统振动的影响

利用一种在轴颈表面大规模加工表面织构的低成本、高效率的方法

设计并制备了带有表面织构的转子。采用无织构和有织构两种转子

在供水压力分别为0.16 MPa、 0.30 MPa及工作转速分别为2 400 r/min、 4 200 r/min和6 000 r/min的工况下

采用在主轴上附加不平衡质量的方法施加同频激振力

分别对无织构转子和有织构转子的振动进行测试分析。实验结果表明:在一定供水压力和转速条件下

表面织构抑制转子轴承系统振动的作用变得非常明显

有织构转子较无织构转子的相对振动量下降幅度超过60%

即使在发生水膜振荡的情况下

表面织构依然可以显著减小转子的振动幅值。因此

合理的表面织构设计

可以有效提高径向滑动轴承支撑的转子系统的稳定性。

Abstract

Aiming at engineering application of surface texture in high speed and high precision machine tool bearings

an effective and simple process was conducted to make texture on the journal surface. The surface texture influence on rotor-journal bearing system stability was experimentally investigated. The rotor was excited by the unbalance mass

and the vibration displacements of journals with and without texture were measured and compared under supplied pressures of 0.16 MPa and 0.30 MPa

and at rotating speeds of 2 400 r/min

4 200 r/min and 6 000 r/min. The experiments reveal that the surface texture slightly affects vibration amplitude in the case of lower supplied pressure and rotating speed

but the surface texture is able to reduce vibration significantly at certain rotating speeds. The supply pressure becomes important for the bearing stability

and the vibration amplitude under higher supplied pressure gets greater than that under lower supplied pressure. However

surface texture restrains rotor-bearing system vibration effectively even if oil whirl arises

and the relative vibration amplitude reduces by 60% in the rotor with surface texture.

关键词

Keywords

references

历建全, 朱华. 表面织构及其对摩擦学性能的影响[J]. 润滑与密封, 2009, 34(2): 94-97.

LI Jianquan, ZHU Hua. Surface texture and its influence on tribological properties[J]. Lubrication Engineering, 2009, 34(2): 94-97.

HAMILTON D B, WALOWIT J A, ALLEN C M. A theory of lubrication by microirregularities[J]. Journal of Fluids Engineering, 1966, 88(1): 177-185.

ETSION I, KLIGERMAN Y, HALPERIN G. Analytical and experimental investigation of laser-textured mechanical seal faces[J]. Tribology Transactions, 1999, 42(3): 511-516.

ETSION I, BURSTEIN L. A model for mechanical seals with regular microsurface structure[J]. Tribology Transactions, 1996, 39(3): 677-683.

RONEN A, ETSION I, KLIGERMAN Y. Friction-reducing surface-texturing in reciprocating automotive components[J]. Tribology Transactions, 2001, 44(3): 359-366.

WANG X L, KATO K, ADACHI K, et al. The effect of laser texturing of SiC surface on the critical load for transition of water lubrication mode from hydrodynamic to mixed[J]. Tribology International, 2001, 34(10): 703-711.

ETSION I, HALPERIN G, BRIZMER V, et al. Experimental investigation of laser surface textured parallel thrust bearings[J]. Tribology Letters, 2004, 17(2): 295-300.

DONG G N, HUA M, LI J, et al. Temperature field and wear prediction for UHMWPE acetabular cup with assumed rectangular surface texture[J]. Materials Design, 2007, 28(9): 2402-2416.

BORGHI A, GUALTIERI E, MARCHETTO D, et al. Tribological effects of surface texturing on nitriding steel for high-performance engine applications[J]. Wear, 2008, 265(7): 1046-1051.

PETTERSSON U, JACOBSON S. Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors[J]. Tribology International, 2007, 40(2): 355-359.

邓海顺, 于海武, 王晓雷. 轴向柱塞泵配流副低压区织构化试验研究[J]. 华中科技大学学报: 自然科学版, 2012, 40(6): 16-19.

DENG Haishun, YU Haiwu, WANG Xiaolei. Study on tribological performance of textured port plates of axial piston pumps[J]. Journal of Huazhong University of Science and Technology: Natural Science Edition, 2012, 40(6): 16-19.

PEI S, MA S, XU H, et al. A multiscale method of modeling surface texture in hydrodynamic regime[J]. Tribology International, 2011, 44(12): 1810-1818.

BRIZMER V, KLIGERMAN Y, ETSION I. A laser surface textured parallel thrust bearing[J]. Tribology Transactions, 2003, 46(3): 397-403.

YU H W, WANG X L, ZHOU F. Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces[J]. Tribology Letters, 2010, 37(2): 123-130.

张金煜, 孟永钢. 推力滑动轴承表面织构的优化设计[J]. 机械工程学报, 2012, 48(17): 91-99.

ZHANG Jinyu MENG Yonggang. Optimal design of surface texture in parallel thrust bearings[J]. Journal of Mechanical Engineering, 2012, 48(17): 91-99.

林起崟, 魏正英, 王宁, 等. 织构滑移表面对滑块轴承摩擦学性能的影响[J]. 华南理工大学学报: 自然科学版, 2013, 41(3): 101-107.

LIN Qiyin, WEI Zhengying, WAMG Ning, et al. Effects of texture slip surface on tribological performance of slider bearing[J]. Journal of South China University of Technology: Natural Science Edition, 2013, 41(3): 101-107.

TALA-IGHIL N, FILLON M, MASPEYROT P. Effect of textured area on the performances of A hydrodynamic journal bearing[J]. Tribology International, 2011, 44(3): 211-219.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

涡轮叶片的热流固耦合数值方法研究及应用

一种支持大规模应用层组播的混合拓扑覆盖网络

时频域交互法在微滑移干摩擦阻尼叶片振动分析中的应用

水中球形微气泡演化的动力学行为分析与控制

控制时滞对负刚度Duffing系统动力学特性的影响