一种新型高压电缆附件优化设计方法

王霞 1; 王陈诚 1; 吴锴 1; 柳松 2; 彭嘉康 2

doi:10.7652/xjtuxb201312018

您当前的位置：

首页 >

文章列表页 >

一种新型高压电缆附件优化设计方法

更新时间：2025-07-09

- 一种新型高压电缆附件优化设计方法
- New Optimal Design Scheme for High Voltage Cable Accessory
- 西安交通大学学报 2013年47卷第12期页码：102-109
- 作者机构：
  
  西安交通大学电力设备电气绝缘国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2013-03-12。作者简介: 王霞(1976—),女,副教授。基金项目: 国家自然科学基金资助项目(50907050,51377131)
- DOI：10.7652/xjtuxb201312018
  中图分类号： TM203
- 网络首发：2013-12-10，
  
  纸质出版：2013
- 稿件说明：
移动端阅览
王霞 1, 王陈诚 1, 吴锴 1, 等. 一种新型高压电缆附件优化设计方法[J]. 西安交通大学学报, 2013,47(12):102-109.

New Optimal Design Scheme for High Voltage Cable Accessory[J]. 2013, 47(12): 102-109.
王霞 1, 王陈诚 1, 吴锴 1, 等. 一种新型高压电缆附件优化设计方法[J]. 西安交通大学学报, 2013,47(12):102-109. DOI： 10.7652/xjtuxb201312018.

New Optimal Design Scheme for High Voltage Cable Accessory[J]. 2013, 47(12): 102-109. DOI： 10.7652/xjtuxb201312018.

摘要

针对电缆附件使用中的扩张形变对附件运行可靠性的影响

提出了一种新型高压电缆附件设计方法。该方法首先通过弹性力学理论

详细推导了电缆附件在扩张过程中的形变和位移方程

然后利用此形变和位移方程将电场优化后呈扩张态的附件结构进行结构松弛至生产结构

从而确保电缆附件安装后的最优电场分布。同时根据据国产35 kV冷缩电缆结构参数

分析和对比了传统附件设计方法和新型附件设计方法对附件电场分布的影响

并通过实际电缆附件的结构扩张和松弛过程验证了附件形变和恢复方法的正确性。仿真和计算结果表明:电缆附件撑开时

绝缘内侧到外侧位移量非线性降低

附件厚度减薄、长度变短

应力锥角度、高压屏蔽管端部形状均偏离附件结构设计尺寸

造成附件界面电场、绝缘内部电场增加

而采用提出的新型电缆附件设计方法

能够有效确保电缆附件扩张后的最优电场分布。

Abstract

Considering the effects of expansion and deformation after accessory installation on the reliability of cable accessory in service

a new optimal design scheme was proposed for high voltage cable accessory. The deformation and displacement equations of cable accessory during expansion were deduced in detail with the theory of elasticity

then the production structure was obtained via the optimized structure relaxation in an expansive state to ensure the optimum electrical field after accessory installation. According to the structure parameters of the domestic 35 kV cold shrinkage cable

the effects on electrical field distribution of cable accessory were analyzed by comparing the proposed and the traditional design schemes

then the deformation and recovery method were verified. The simulation and calculation show that the displacement nonlinearly decreases from inside to outside of the insulation during cable accessory expansion; the expanded accessory leads to a thinner main insulation thickness and a shorter length; the angle of stress cone and the end shape of high voltage shielding tube deviate from the design structure

which results in enhanced electric field at the interface and the end of HV shielding tube.

关键词

Keywords

references

KWANG S S, JIN H N, JI H K, et al. Interfacial properties of XLPE/EPDM laminates [J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2000, 7(2): 216-221.

TANAKA T, ITO T, TANAKA Y, et al. Carrier jumping over a patenting barrier at the interface of LDPE laminated dielectrics [C]∥Conference Record of IEEE International Symposium on Electrical Insulation. Piscataway, NJ, USA: IEEE, 2000: 40-43.

YING Q L, WEI D, GAO X Q, et al. Development of high voltage XLPE power cable system in China [C]∥Proceedings of the 6th International Conference on Properties and Applications of Dielectric Materials. Piscataway, USA: IEEE, 2000: 247-253.

罗俊华, 邱毓昌, 杨黎明. 10 kV及以上电力电缆运行故障统计分析 [J]. 高电压技术, 2003, 29(6): 14-16.

LUO Junhua, QIU Yuchang, YANG Liming. Operation fault analysis of CLPE power cable about 10 kV [J]. High Voltage Engineering, 2003, 29(6): 14-16.

YAROSLAVSKIY V, WALKER M, KATZ C, et al. Comparative laboratory evaluation of preloaded joints for medium voltage cables [J]. IEEE Transactions on Power Delivery, 2008, 23(2): 516-522.

VIVO B D, SPAGNUOLO G, VITELLI M. Variability analysis of composite materials for stress relief in cable accessories [J]. IEEE Transactions on Magnetics, 2004, 40(2): 418-425.

DAIGO Y, TAKEHISA H, SHIGEKI S, et al. Electric field optimization of the power cable joint by using evolutionary calculation method [J]. Electrical Engineering in Japan, 2005, 150(4): 44-53.

李喆, 贾贤, 尹毅. 10 kV及以下电缆附件的数值计算和应力锥优化辅助设计 [J]. 高压电器, 2006, 42(5): 379-381.

LI Zhe, JIA Xian, YIN Yi. Assistant design of numerical calculation and electrical stress optimizing on cable accessories up to 10 kV [J]. High Voltage Apparatus, 2006, 42(5): 379-381

王佩龙. 高压电缆附件的电场及界面压力设计 [J]. 电线电缆, 2011(5): 1-4.

WANG Peilong. Electrical field and interface pressure control in HV cable accessories design [J]. Electric Wire Cable, 2011(5): 1-4.

王超, 刘毅刚, 刘刚, 等. 有限元法应用于电缆终端应力锥缺陷分析 [J]. 高电压技术, 2007, 33(5): 152-154.

WANG Chao, LIU Yigang, LIU Gang, et al. Analysis of faults on cable terminal stress cone based on finite element method [J]. High Voltage Engineering, 2007, 33(5): 152-154.

DU B X, GU L. Effects of interfacial pressure on tracking failure between XLPE and silicon rubber [J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2010, 17(6): 1922-1930.[12] DU B X, ZHU X H, GU L, et al. Effect of surface smoothness on tracking mechanism in LPE-Si-rubber interfaces [J]. IEEE Transactions on Dielectrics and Electrical Insulation, 2011, 18(1): 176-181.

DANG C. Effect of the interfacial pressure and electrode gap on the breakdown strength of various dielectric interfaces [C]∥Conference Record of IEEE International Symposium on Electrical Insulation. Piscataway, NJ, USA: IEEE, 1996: 695-698.

HASHEMINEZHAD S M, ILDSTAD E, NYSVEEN A. Breakdown strength of solid/solid interface [C]∥IEEE International Conference on Solid Dielectrics. Piscataway, NJ, USA: IEEE, 2010: 695-698.

徐秉业, 刘信声. 应用弹塑性力学 [M]. 北京: 清华大学出版社, 1995: 183-230.

刘子玉, 王惠明. 电力电缆结构设计原理 [M]. 西安: 西安交通大学出版社, 1995: 259-268.

巫松桢, 谢大荣, 陈寿田, 等. 电气绝缘材料科学与工程 [M]. 西安: 西安交通大学出版社, 1996: 167-169.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

地球同步轨道合成孔径雷达干涉测量模型

温度对硅橡胶电树枝自恢复特性的影响机制

张角凹坑气膜孔对双层壁气膜冷却特性的影响

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化

水蒸气掺混对氨裂解气旋流燃烧与排放特性的影响研究