自由活塞内燃发电机活塞环摩擦特性研究

许大涛; 冯慧华; 袁晨恒; 左正兴

doi:10.7652/xjtuxb201303012

您当前的位置：

首页 >

文章列表页 >

自由活塞内燃发电机活塞环摩擦特性研究

更新时间：2025-07-09

- 自由活塞内燃发电机活塞环摩擦特性研究
- Friction Behaviour of Piston Ring for Free-Piston Engine Generator
- 西安交通大学学报 2013年47卷第3期页码：64-68
- 作者机构：
  
  北京理工大学机械与车辆学院,北京,100081
- 作者简介：
- 基金信息：
  
  : 2012-08-26。作者简介: 许大涛(1988—),男,硕士生;冯慧华(通信作者),男,副教授。基金项目: 国家自然科学基金资助项目(51006010);高等学校学科创新引智计划资助项目(B12022)
- DOI：10.7652/xjtuxb201303012
  中图分类号： TK441
- 网络首发：2013-03-10，
  
  纸质出版：2013
- 稿件说明：
移动端阅览
许大涛, 冯慧华, 袁晨恒, 等. 自由活塞内燃发电机活塞环摩擦特性研究[J]. 西安交通大学学报, 2013,47(3):64-68.

Friction Behaviour of Piston Ring for Free-Piston Engine Generator[J]. 2013, 47(3): 64-68.
许大涛, 冯慧华, 袁晨恒, 等. 自由活塞内燃发电机活塞环摩擦特性研究[J]. 西安交通大学学报, 2013,47(3):64-68. DOI： 10.7652/xjtuxb201303012.

Friction Behaviour of Piston Ring for Free-Piston Engine Generator[J]. 2013, 47(3): 64-68. DOI： 10.7652/xjtuxb201303012.

摘要

为验证自由活塞内燃发电机摩擦损失小的潜在优势

建立了活塞环混合润滑模型。通过数值求解

分别获得了同缸径的曲轴式内燃机和自由活塞内燃发电机的活塞环与缸套间的油膜厚度、摩擦力和摩擦功率。对比分析表明

两者的活塞环油膜厚度相近

平均摩擦功率近似相等。自由活塞的活塞环摩擦力峰值较大

持续时间较短。如果考虑凸轮、曲轴等其他部件的摩擦损耗

则在总机械摩擦损失方面

自由活塞内燃发电机相比曲轴式内燃机具有显著优势。

Abstract

In order to validate the potential advantage of low friction loss for free-piston engine generators

a hybrid lubrication model of the piston ring was established. The thickness of oil film

friction force and friction loss power in both crankshaft engines and free-piston engine generators with the same cylinder diameter were obtained through the numerical simulation. The comparison analysis indicates that their oil film thickness is close with the similar average power of friction losses. The peak friction force of the free-piston ring is greater than that in crankshaft but its duration is shorter. In terms of the total friction loss

the free-piston engine generator will have a significant advantage if the losses of other components such as the cam and crankshaft in crankshaft engines are considered.

关键词

Keywords

references

MIKALSEN R, ROSKILLY A P. A review of free-piston engine history and applications [J]. Applied Thermal Engineering, 2007, 27(14/15): 2339-2352.

肖翀, 左正兴. 自由活塞式内燃发电机动态仿真与特性分析 [J]. 农业机械学报, 2009, 40(2): 46-49.

XIAO Chong, ZUO Zhengxing. Dynamic simulation and characteristic of free piston generator [J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(2): 46-49.

MAO J, ZUO Z, LI W. Multi-dimensional scavenging analysis of a free-piston linear alternator based on numerical simulation [J]. Applied Energy, 2011, 88(4): 1140-1152.

MAO J, ZUO Z, LIU D. Numerical simulation of a spark ignited two-stroke free-piston engine generator [J]. Journal of Beijing Institute of Technology, 2009, 3(18): 283-287.

ATKINSON C M, PETRUANU S, CLARK N N, et al. Numerical simulation of a two-stroke linear engine-alternator combination, SAE 990921 [R]. Washington DC, USA: SAE, 1999: 1-5.

LI Q, XIAO J, HUANG Z. Simulation of a two-stroke free-piston engine for electrical power generation [J]. Energy Fuels, 2008, 22(5): 3443-3449.

PATIR N, CHENG H. An average flow model for determining the effects of three-dimensional roughness on partial hydrodynamic lubrication [J]. ASME Journal of Lubrication Technology, 1978, 100(1): 12-17.

WU C, ZHENG L. An average Reynolds equation for partial film lubrication with a contact factor [J]. ASME Journal of Tribology, 1989, 111(1): 188-191.

GREENWOOD J A, TRIPP J H. The contact of two nominal flat rough surfaces [J]. Proc Inst Mech Eng: Journal of Engineering Tribology, 1971, 185: 625-629.

刘焜, 谢友柏. 内燃机缸套-活塞环混合润滑特性及摩擦力分析 [J]. 内燃机学报, 1995, 13(3): 299-305.

LIU Kun, XIE Youbai. The study of friction and mixed lubrication of piston ring-cylinder of engine [J]. Transactions of CSICE, 1995, 13(3): 299-305.

ROHDE S M. A mixed friction model for dynamically loaded contacts with application to piston ring lubrication [C]∥Winter Annual Meeting of ASME. New York, USA: ASME, 1980: 262-271.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

自由活塞内燃发电机稳态压缩比控制

月壤水冰原位开采过程中热质传递特性数值研究

考虑空化-黏性热效应的螺旋线组合型机械密封仿真与性能分析

EBSILON软件在热电联产系统优化中的应用综述

电动车辆间接热系统快速除湿响应迟滞机理及优化控制策略