陶瓷/金属复合装甲抗弹约束效应述评

刘桂武 1; 2; 倪长也 1; 金峰 1; 乔冠军 2; 卢天健 1

您当前的位置：

首页 >

文章列表页 >

陶瓷/金属复合装甲抗弹约束效应述评

更新时间：2025-07-09

- 陶瓷/金属复合装甲抗弹约束效应述评
- Review of Anti-Ballistic Confinement Effects of Ceramic-Metal Composite Armor
- 西安交通大学学报 2011年45卷第3期页码：7-15+24
- 作者机构：
  
  1. 西安交通大学强度与振动教育部重点实验室,西安,710049
  2. 西安交通大学金属材料强度国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2010-06-05. 作者简介: 刘桂武(1976-),男,博士后;卢天健(联系人),男,教授,博士生导师. 基金项目: 国家重点基础研究发展规划资助项目(2011CB610305);国家自然科学基金重点资助项目(51002114,10632060);高等学校学科引智计划资助项目(B06024);教育部博士后科学基金资助项目(20100470089);高等学校博士学科点专项科研基金资助项目(20100201110035);中央高校基本科研业务费专项资金资助项目(xjj20100
- DOI：
  中图分类号： O348
- 网络首发：2011-03-10，
  
  纸质出版：2011
- 稿件说明：
移动端阅览
刘桂武 1, 2, 倪长也 1, 等. 陶瓷/金属复合装甲抗弹约束效应述评[J]. 西安交通大学学报, 2011,45(3):7-15+24.

Review of Anti-Ballistic Confinement Effects of Ceramic-Metal Composite Armor[J]. 2011, 45(3): 7-15+24.
刘桂武 1, 2, 倪长也 1, 等. 陶瓷/金属复合装甲抗弹约束效应述评[J]. 西安交通大学学报, 2011,45(3):7-15+24. DOI：

Review of Anti-Ballistic Confinement Effects of Ceramic-Metal Composite Armor[J]. 2011, 45(3): 7-15+24. DOI：

摘要

通过对陶瓷/金属复合装甲及其陶瓷约束的介绍

综述了陶瓷复合装甲的抗弹性能表征和3种陶瓷约束(轴向、侧向和三维约束)对抗弹性能及机理的影响.作者认为

采用金属铸造工艺制备金属封装陶瓷复合装甲具有潜在的应用前景

同时应加强对新型陶瓷复合装甲的综合抗弹性能表征、动力学特性、结构优化设计等方面的研究.

Abstract

The ceramic-metal composite armor and its confinement of ceramic are introduced. The characterization of ballistic performance and the effects of three confinements(axial

lateral and three-dimensional)on ballistic performance and anti-ballistic mechanisms are reviewed. The metal-encased ceramic composite armors fabricated by metal casting are proposed owing to their potential applications. It is pointed out that the studies on characterization of overall ballistic performances

dynamic characteristics and structural design optimization of new ceramic composite armors should be enhanced.

关键词

Keywords

references

RAPACKI E J, HAUVER G E, NETHERWOOD P H, et al. Ceramics for armours: a material system perspective [C]∥Proceedings of the 7th Annual TARDEC Ground Vehicle Survivability Symposium. Monterey, California, USA: Naval Postgraduate School, 1996:139-147.

侯海量, 朱锡, 阚于龙. 轻型陶瓷复合装甲结构抗弹性能研究进展 [J]. 兵工学报, 2008, 29(2):208-216.

HOU Hailiang, ZHU Xi, KAN Yulong. The advance of ballistic performance of light ceramic composite armour under the impact of projectile [J]. Acta Armamentarii, 2008, 29(2):208-216.

SHERMAN D, BEN-SHUSHAN T. Quasi-static impact damage in confined ceramic tiles [J]. International Journal of Impact Engineering, 1998, 21(4):245-265.

HAN C, SUN C T. A study of pre-stress effect on static and dynamic contact failure of brittle materials [J]. International Journal of Impact Engineering, 2004, 24(6/7):597-611.

BAO Yiwang, SU Shengbiao, YANG Jianjun, et al. Prestressed ceramics and improvement of impact resistance [J]. Materials Letters, 2002, 57(2):518-524.

HOLMQUIST T J, JOHNSON G R. Modeling prestressed ceramic and its effect on ballistic performance [J]. International Journal of Impact Engineering, 2005, 31(2):113-127.

RODRIGUEZ-CASTRO R, WETHERHOLD R C, KELESTEMUR M H. Microstructure and mechanical behaviour of functionally graded Al A359/SiCp composite [J]. Materials Science and Engineering: A, 2002, 323(1/2):445-456.

GOOCH W A, CHEN B H C, BURKINS M S, et al. Development and ballistic testing of a functionally gradient ceramic/metal applique [J]. Materials Science Forum, 1999, 308/309/310/311:614-621.

ANDERSON C E, ROYAL-TIMMONS S A. Ballistic performance of confined 99.5%-Al2O3 ceramic tiles [J]. International Journal of Impact Engineering, 1997, 19(8):703-713.

黄良钊, 张巨先. 弹丸对陶瓷靶侵彻试验中的约束效应研究 [J]. 兵器材料科学与工程, 1999, 22(4):13-17.

HUANG Liangzhao, ZHANG Juxian. Study of binding effect in test on impacting and biting ceramics target with ball [J]. Ordnance Material Science and Engineering, 1999, 22(4):13-17.

SHOCKEY D A, MARCHAND A H, SKAGGS S R, et al. Failure phenomenology of confined ceramic targets and impacting rods [J]. International Journal of Impact Engineering, 1990, 9(3):263-275.

晏麓晖,曾首义,蒋志刚,等. 陶瓷厚度与约束对陶瓷复合靶抗弹性能的影响 [J]. 弹道学报, 2009, 21(3):15-18, 22.

YAN Luhui, ZENG Shouyi, JIANG Zhigang, et al. Effects of ceramic thickness and confinement on performance of ceramic composite targets [J]. Journal of Ballistics, 2009, 21(3):15-18, 22.

CHU H S, LILLO T H, MCHUGH K M. Coated armor system and process for making the same: US,20060105183 [P]. 2006-05-18.

COLLIER S, PEKER A. Encapsulated ceramic armor: WO, 2003078158-A1 [P]. 2003-09-25.

LEIGHTON K, GARNIER J, ALESHIRE E. Metal-ceramic materials: US, 20060141237-A1 [P]. 2006-06-29.

DIPIETRO S. Method for producing armor through metallic encapsulation of a ceramic core: WO, 2009045584 [P]. 2009-04-09.

RICHARD P, DANIEL A. Ceramic armor and method or making by encapsulation including use of a stiffening plate: US, 20060137517 [P]. 2006-06-29.

ABKOWITZ S, ROWELL D M, HEUSSI H L, et al. Impact resistant clad composite armor and method for forming such armor: US, 4987033 [P]. 1991-01-22.

KELSEY V P. Method and system for reaction bonded ceramic armor formed in situ in a metal containment: WO, 2006083319 [P]. 2006-08-10.

江东亮,李龙土,欧阳世翕,等. 无机非金属材料手册:上 [M]. 北京: 化学工业出版社, 2009:30-240.

金志浩, 高积强, 乔冠军. 工程陶瓷材料 [M]. 西安: 西安交通大学出版社, 2000:130-170.

MARTIENSSEN W, WARLIMONT H. Handbook of condensed matter and materials data: part 3 classes of materials, ceramics [M]. Berlin, Germany: Springer, 2005:431-476.

胡玉龙, 蒋凡. 装甲陶瓷的发展现状与趋势 [J]. 兵器材料科学与工程, 1996, 19(5):37-42.

HU Yulong, JIANG Fan. Development and current status of armor ceramics [J]. Ordnance Material Science and Engineering, 1996, 19(5):37-42.

黄伯云,李成功,石力开,等. 中国材料工程大典:第四卷有色金属工程上[M]. 北京: 化学工业出版社, 2006:52-161, 499-694.

孙玉福. 钢铁材料速查手册 [M]. 北京: 机械工业出版社, 2009:53-58.

YAZIV D, ROSENBERG G, PARTOM Y. Differential ballistic efficiency of applique armor [C]∥Proceedings of 9th International Symposium on Ballistics: Vol.2. Shrivenahm, UK: Royal Military College of Science, 1986:315-319.

BLESS S J, ROSENBERG Z, YOO B. Hypervelocity penetration of ceramic [J]. International Journal of Impact Engineering, 1987, 5(1/2/3/4):165-171.

HOHLER V, STILP A J, WEBER K. Hypervelocity penetration of tungsten sinter-alloy rods into aluminum [J]. International Journal of Impact Engineering, 1995, 17(1/2/3):409-418.

张自强, 赵宝荣, 张锐生, 等. 装甲防护技术基础 [M].北京: 兵器工业出版社, 2000:44-47.

张连生, 黄风雷. 抗弹陶瓷材料抗弹性能的理论表征 [J]. 北京理工大学学报, 2005, 25(7):651-654.

ZHANG Liansheng, HUANG Fenglei. Theoretical characterization of ballistic performance of armor ceramics [J]. Transactions of Beijing Institute of Technology, 2005, 25(7):651-654.

TATE A. A theory for the deceleration of long rods after impacts [J]. Journal of the Mechanics and Physics of Solids, 1967, 15:387-399.

HILL R. The mathematical theory of plasticity [M].London, UK: Oxford University Press, 1950.

SATAPATHY S, BLESS S. Calculation of penetration resistance of brittle materials using spherical cavity expansion analysis [J]. Mechanics of Materials, 1996, 23:323-330.

麻震宇, 曾首义, 蒋志刚. 陶瓷复合靶板抗长杆弹侵彻的数值模拟分析 [J]. 中国科学技术大学学报, 2007, 37(7):727-731.

MA Zhenyu, ZENG Shouyi, JIANG Zhigang. Numerical analysis of the ballistic performance of confined ceramic composite targets against long rod penetrators [J]. Journal of University of Science and Technology of China, 2007, 37(7):727-731.

孙宇新, 李永池, 于少娟, 等. 长杆弹侵彻受约束A95 陶瓷靶的实验研究 [J]. 弹道学报, 2005, 17(2):38-41, 48.

SUN Yuxin, LI Yongchi, YU Shaojuan, et al. An experimental study on the penetration confined A95 ceramic targets [J]. Journal of Ballistics, 2005, 17(2):38-41, 48.

于少娟, 李永池, 张先锋, 等. 约束陶瓷靶抗射流侵彻实验研究 [J]. 中国科学技术大学学报, 2008, 38(11):1299-1303.

YU Shaojuan, LI Yongchi, ZHANG Xianfeng, et al. An experimental study on anti-penetration process of confined AD95 ceramic targets to shaped charge jets [J]. Journal of University of Science and Technology of China, 2008, 38(11):1299-1303.

李平,李大红,宁建国, 等. Al2O3陶瓷复合靶抗长杆弹侵彻性能和机理实验研究 [J]. 爆炸与冲击, 2003, 23(4):289-294.

LI Ping, LI Dahong, NING Jianguo. Experimental study on the ballistic performance and mechanism of confined ceramic targets against long rod penetrators [J]. Explosion and Shock Waves, 2003, 23(4):289-294.

ANDERSON C E, WALK J D, LANKFORD J. Investigations of the ballistic response of brittle materials, SwRI Report 06-5117/002 [R]. Research Triangle Park, NC, USA: US Army Research Office, 1995:1-96.

段卓平, 朱艳丽, 张连生. 爆炸成型弹丸对Al2O3装甲陶瓷材料的侵彻实验研究[J]. 爆炸与冲击, 2006, 26(6):505-509.

DUAN Zhuoping, ZHU Yanli, ZHANG Liansheng. DOP experimental study on EFP penetrating Al2O3 armor ceramic [J]. Explosion and Shock Waves, 2006, 26(6):505-509.

张先锋,李永池. 约束及增韧对氧化铝陶瓷抗射流侵彻性能的影响 [J]. 爆炸与冲击, 2009, 29(2):149-154.

ZHANG Xianfeng, LI Yongchi. Constraining and toughening effects on anti-penetration properties of alumina ceramic targets to shaped charge jets [J]. Explosion and Shock Waves, 2009, 29(2):149-154.

ANDERSON C E, MORRIS B L. The ballistic performance of confined Al2O3 ceramic tiles [J]. International Journal of Impact Engineering, 1992, 12(2):167-187.

ROSENBERG Z, DEKEL E, HOHLER V, et al. Penetration of tungsten-alloy rods into composite ceramic targets: experiments and 2-D simulations [J]. Shock Compression of Condensed Matter, 1997, 42:917-920.

WEBER K, HLOMQUIST T J, TEMPLETON D W. The response of layered aluminum nitride targets subjected to hypervelocity impact [J]. International Journal of Impact Engineering, 2001, 26(1):831-841.

WESTERLING L, LUNDBERG P, LUNDBERG B. Tungsten long-rod penetration into confined cylinders of boron carbide at and above ordnance velocities [J]. International Journal of Impact Engineering, 2001, 25(7):703-714.

LYNCH N J, BLESS S J, CULLIS I G, et al. The influence of confinement on the penetration of ceramic targets by KE projectiles at 1.8 and 2.6 km/s [J]. International Journal of Impact Engineering, 2006, 33(1):390-401.

SHERMAN D. Impact failure mechanisms in alumina tiles on finite thickness support and the effect of confinement [J]. International Journal of Impact Engineering, 2000, 24(3):313-318.

DOYOYO M. Experiments on the penetration of thin long-rod projectiles into thick long-cylindrical borosilicate targets under pressure-free polycarbonate, aluminum and steel confinements [J]. International Journal of Solids and Structures, 2003, 40(20):5455-5475.

王和平, 王智慧. 陶瓷约束效应对复合装甲抗弹性能的影响 [J]. 兵器材料科学与工程, 2008, 31(2):61-64.

WANG Heping, WANG Zhihui. Influence of ceramic confined effect on ballistic performance of composite armor [J]. Ordnance Material Science and Engineering, 2008, 31(2):61-64.

O'DONNELL R G, WOODWARD R L. Fragmentation of alumina in ballistic impact as a function of grade and confinement [C]∥Proceedings of the 12th International Symposium on Ballistics: Vol.1. San Antonio, Texas, USA: Southwest Research Institute, 1990:410-418.

HOLMQUIST T J, TEMPLETON D W, BISHNOI K D. Constitutive modeling of aluminum nitride for large strain, high-strain rate, and high-pressure applications [J]. International Journal of Impact Engineering, 2001, 25(3):211-231.

Livermore Software Technology Corporation. LS-DYNA keyword user's manual: version 970 [M]. Livermore, CA, USA: Livermore Software Technology Corporation, 2003.

王曙光, 朱建生. 金属封装陶瓷复合装甲抗弹性能研究 [J]. 弹道学报, 2009, 21(4):68-71.

WANG Shuguang, ZHU Jiansheng. Study on antibullet performance of metal-ceramic composite armor [J]. Journal of Ballistics, 2009, 21(4):68-71.

LI Jin-zhu, HUANG Feng-lei, ZHANG Lian-sheng. Numerical simulations of tungsten alloy rods penetration into alumina ceramic/armor steel composite target [J]. Journal of Beijing Institute of Technology, 2008, 17(3):253-258.

CHOCRON I S, ANDERSON C E, BEHNER T, et al. Lateral confinement effects in long-rod penetration of ceramics at hypervelocity [J]. International Journal of Impact Engineering, 2006, 33(1):169-179.

MCGLAUN J M, THOMPSON S L, ELRICK M G. CTH: a three-dimensional shock wave physics code [J]. International Journal of Impact Engineering, 1990, 10(1/2/3/4):351-360.

WESTERLING L, LUNDBERG P. The influence of confinement on the protective capability of ceramic armour at two different velocities [C]∥Proceedings of the 15th International Symposium on Ballistics: Vol.1 Jerusalem, Israel: Israel Institute of Technology, 1995:283-290.

杜忠华, 赵国志, 王晓鸣,等. 双层陶瓷复合靶板抗弹性的研究 [J]. 航空学报, 2002, 23(2):147-150.

DU Zhonghua, ZHAO Guozhi, WANG Xiaoming, et al. Study of double-layer ceramic complex armor for defensible performance [J]. Acta Aeronautica et Astronautica Sinica, 2002, 23(2):147-150.

BEN-DOR G, DUBINSKY A, ELPERIN T. Optimization of two-component composite armor against ballistic impact [J]. Composite Structures, 2005, 69(1):89-94.

BEN-DOR G, DUBINSKY A, ELPERIN T. Improved Florence model and optimization of two-component armor against single impact or two impacts [J]. Composite Structures, 2009, 88(1):158-165.

SHI J, GROW D. Effect of double constraints on the optimization of two-component armor systems [J]. Composite Structures, 2007, 79(3):445-453.

KURTARAN H, BUYUK M, ESKANDARIAN A. Design automation of a laminated armor for best impact performance using approximate optimization method [J]. International Journal of Impact Engineering, 2003, 29(1):397-406.

井玉安, 果世驹, 韩静涛. 钢/Al2O3陶瓷/钢轻型复合装甲板抗弹性能 [J]. 北京科技大学学报, 2007,29(4):402-407.

JING Yuan, GUO Shiju, HAN Jingtao. Ballistic property of steel/ceramic/steel composite armor [J]. Journal of University of Science and Technology Beijing, 2007, 29(4):402-407.

FLORENCE A L. Interaction of projectiles and composites armour: partⅡ [R]. California, USA: Stanford Research Institute, 1969.

韩辉, 李楠. 金属封装陶瓷复合装甲研究进展 [J]. 兵器材料科学与工程, 2008, 31(4):79-82.

HAN Hui, LI Nan. Research progress in metal encapsulating ceramic composite armors [J]. Ordnance Material Science and Engineering, 2008, 31(4):79-82.

蒋志刚, 曾首义, 申志强. 轻型陶瓷复合装甲结构研究进展[J]. 兵工学报, 2010, 31(5):603-610.

JIANG Zhigang, ZENG Shouyi, SHEN Zhiqiang. Research progress on lightweight ceramic composite armor structure [J]. Acta Armamentarii, 2010, 31(5):603-610.

刘桂武, 乔冠军, 王红洁, 等. 一种金属/陶瓷复合材料的装甲及其制备方法: 中国, 200710018553 [P]. 2008-04-09.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

多工况下离心压气机叶轮-机匣一体联合设计优化

不同板叠材料热声热机能量转换过程数值模拟研究

隧道内燃料电池汽车氢气泄漏扩散特性及影响因素

三塔合一间接空冷系统结构参数对夏季运行特性的影响研究

扇贝仿生密封腔室内超临界二氧化碳泄漏流湍动能耗散机理研究