扩散连接Al/Ni/0Cr18Ni9Ti复合材料的界面组织

成小乐; 高义民; 邢建东; 廖熠; 尹敏

您当前的位置：

首页 >

文章列表页 >

扩散连接Al/Ni/0Cr18Ni9Ti复合材料的界面组织

专题研究 | 更新时间：2025-12-08

- 扩散连接Al/Ni/0Cr18Ni9Ti复合材料的界面组织
- Investigation into Intermetallic Compounds in Al/Ni/0Cr18Ni9Ti Diffusion Bonded Joint
- 西安交通大学学报 2007年41卷第7期页码：867-869+874
- 作者机构：
  
  西安交通大学金属材料强度国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
  
  : 2006-12-13. 作者简介: 成小乐(1976～),男,博士生;高义民(联系人),男,教授,博士生导师. 基金项目: 国家自然科学基金资助项目(50471034)
- DOI：
  中图分类号： [TB331]
- 网络首发：2007-07-10，
  
  纸质出版：2007
- 稿件说明：
移动端阅览
成小乐, 高义民, 邢建东, 等. 扩散连接Al/Ni/0Cr18Ni9Ti复合材料的界面组织[J]. 西安交通大学学报, 2007,41(7):867-869+874.

成小乐, 高义民, 邢建东, et al. Investigation into Intermetallic Compounds in Al/Ni/0Cr18Ni9Ti Diffusion Bonded Joint[J]. 2007, 41(7): 867-869+874.
成小乐, 高义民, 邢建东, 等. 扩散连接Al/Ni/0Cr18Ni9Ti复合材料的界面组织[J]. 西安交通大学学报, 2007,41(7):867-869+874. DOI：

成小乐, 高义民, 邢建东, et al. Investigation into Intermetallic Compounds in Al/Ni/0Cr18Ni9Ti Diffusion Bonded Joint[J]. 2007, 41(7): 867-869+874. DOI：

摘要

选取纯Ni箔作过渡层

采用真空热压扩散工艺

在加热温度480 ℃、压力10 MPa、真空度1.0×10

-2

Pa的工艺条件下

制备了变形铝合金2024和不锈钢0Cr18Ni9Ti双金属复合材料.利用扫描电子显微镜、能谱仪、X射线衍射仪和显微硬度仪等测试分析方法

对双金属复合材料的2个连接界面及基体进行了组织、性能分析.结果表明:不锈钢/纯Ni界面形成了宽约8 μm的互扩散区

但其过渡区无金属间化合物生成; Al/Ni界面生成了宽约4 μm的扩散过渡区

过渡区的相组成为金属间化合物Al

、Al

Ni及Al

Abstract

Choosing pure nickel foil as the transition layer

Al/0Cr18Ni9Ti bimetallic composite is prepared with the vacuum warm compaction diffusion method under the condition of 480 ℃ compaction temperature

10 MPa pressure and 1.0×10

-2

Pa vacuum. The structures and performances of the two bimetallic composite bonding interfaces and matrix are analyzed respectively with scanning electron microscope

X-ray diffractometer and Vickers microhardness scale. It is found that under the condition of diffusion bonding

three kinds of intermetallic compounds

Ni and Al

form in the Al/Ni interface less than 4 μm in thickness; and no intermetallic compound forms in the Ni/0Cr18Ni9Ti

diffusion zone with about 8 μm in thickness.

关键词

Keywords

references

Glueck J, Gluck J.Compound profiled conductor rail has wear strip with recesses, notches or embossings at its longitudinal edges, filled at least partially by connecting material: US, 6935473-B1 [P]. 2005-08-13.

Hartland D J. Conductor rail with wear-resistant facing layer- has aluminum body with stainless stem facing layer formed by welding two sections into longitudinal J-section strips: US, 5047595-A [P]. 1991-09-10.

Anderson B C. Al-Cu-Fe quasicrystal/ultra-high molecular weight polyethylene composites as biomaterials for acetabular cup prosthetics [J]. Biomaterials, 2002, 23: 1761-1768.

VER Aluminum-Werke AG. Joining aluminum or copper rails to steel conductors-esp. for aluminum mfr. by electrolysis, using explosion plated joint: Sweden, SE200500323-A [P]. 2006-07-18.

杨连发,郭成,程羽,等. 钢铝复合导电轨制造技术的探讨[J]. 中国铁道科学, 2004, 25(6): 103-108.

Yang Lianfa, Guo Cheng, Cheng Yu, et al. New technologies of steel aluminum composite conductor rail [J]. China Railway Science, 2004, 25(6): 103-108.

Anon. Composite conductor rail replaces catenary in tunnels [J]. Railway Gazette International, 1989, 145(10): 729-730.

Lee W B, Bang K S, Jung S B. Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing [J]. Journal of Alloys and Compounds, 2005, 390: 212-219.

陈国良,林均品. 有序金属间化合物结构材料物理金属学基础[M]. 北京:冶金工业出版社,1999:3-12.

郭建亭.有序金属间化合物镍铝合金[M].北京:科学出版社,2003:28-35

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

接触品质：采用界面工程实现材料超常力学性能新方法

考虑应变率效应的复合材料层合板冲击动态响应

35CrMnSi/T3惯性径向摩擦焊接复合界面的元素扩散

切向接触刚度测量方法的理论改进

膜状冷凝初期过程的分子动力学模拟研究