西安交通大学动力工程多相流国家重点实验室,西安,710049
网络首发:2010-05-10,
纸质出版:2010
移动端阅览
严俊杰, 李波, 杨建军, 等. 喷射式低温乏汽回收利用装置火用分析[J]. 西安交通大学学报, 2010,44(5):1-4+90.
Exergy Analysis of Exhaust Steam Reclaim Device with Injector[J]. 2010, 44(5): 1-4+90.
建立了喷射式低温乏汽回收利用装置的火用分析模型.对比研究了无旋流、水旋流、蒸汽旋流、水汽旋流4种结构形式下装置火用效率的变化规律
分析了喉嘴距、混合腔收缩角、喉嘴面积比等结构参数对装置火用效率的影响
研究了水旋流形式下装置火用效率随汽水参数变化的规律.发现最佳的结构形式为水旋流结构
最佳的结构参数为:喉嘴距L=145 mm、收缩角θ=18°、面积比M=5.44
得出装置火用效率随进水温度和进汽压力的增加而增加
随进水压力的增加而降低.研究结果可为装置结构的优化和运行参数的选择提供依据.
An exergy analysis model of an exhaust steam reclaim device with injector was established. The variation of exergy efficiency was compared under four different structures(without-swirling
water-swirling
steam-swirling and steam-water-swirling)on the basis of the experiment. The influences of the different structure parameters(spout-throat distance
contract angle and area ratio)of the injector and different steam-water parameters on the exergy efficiency of the device were analyzed. The results show that the adoption of the water-swirling structure can obtain the optimum exergy efficiency. Moreover
the exergy efficiency reaches the highest value at the spout-throat distance of 145 mm
the contract angle of 18°
and the area ratio of 5.44. In addition
the exergy efficiency of the injector increases with the increase in the inlet water temperature and the inlet steam pressure and decreases with the increase in the inlet water pressure.
YAN Junjie, SHAO Shufeng, LIU Jiping, et al. Experiment and analysis on performance of steam-driven jet injector for district-heating system[J]. Applied Thermal Engineering, 2005, 25:1153-1167.
DEBERNE N, LEONE J F, DUQUE A, et al. A model for calculation of steam injector performance[J]. International Journal of Multiphase Flow, 1999, 25: 841-855.
NARABAYASHI T, MIZUMACHI W, MORI M. Study on two-phase flow dynamics in steam injectors [J]. Nuclear Engineering and Design, 1997, 175:147-156.
祝银海, 厉彦忠, 鱼剑琳, 等. 一种新的喷射器模型及其实验验证[J]. 西安交通大学学报,2008,42(9):1096-1101.
ZHU Yinhai, LI Yanzhong, YU Jianlin, et al. Novel ejector model with experimental validation[J]. Journal of Xi'an Jiaotong University, 2008, 42(9):1096-1101.
SUN Dawen. Variable geometry ejectors and their applications in ejector refrigeration systems[J]. Energy, 1996,10(21):919-929.
李小龙,张朋飞,严俊杰,等. 旋流喷射乏汽回收装置性能的实验研究[J]. 工程热物理学报,2009,30(7):799-802.
LI Xiaolong, ZHANG Pengfei, YAN Junjie, et al. Experimental study on the performance of exhaust steam reclaim device by jetting vortically[J]. Journal of Engineering Thermophysics, 2009,30(7):799-802.
张朋飞,李小龙,严俊杰,等. 低温乏汽回收利用装置性能的实验研究[J]. 工程热物理学报, 2009,30(7):1152-1154.
ZHANG Pengfei, LI Xiaolong, YAN Junjie, et al. Experimental research on the performance of the low temperature exhaust steam reclamation device[J]. Journal of Engineering Thermophysics, 2009,30(7):1152-1154.
YAN Junjie, CHONG Daotong, WU Xinzhuang. Effect of swirling vanes on performance of steam-water jet injector[EB/OL].[2009-11-07].http:∥www.sciencedirect.com/science.
严俊杰,杨建军,张朋飞,等. 低温乏汽回收利用装置的结构参数研究[J]. 西安交通大学学报,2010,44(1):1-4.
YAN Junjie, YANG Jianjun, ZHANG Pengfei, et al. Influence of structure parameters on performance of low temperature exhaust steam recovery device[J]. Journal of Xi'an Jiaotong University, 2010,44(1):1-4.
0
浏览量
4
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621