氧化铝陶瓷注射成型用黏结剂及混料工艺研究

张笑; 鲍崇高; 乔冠军; 周春婷; 高丽丽

您当前的位置：

首页 >

文章列表页 >

氧化铝陶瓷注射成型用黏结剂及混料工艺研究

更新时间：2025-07-09

- 氧化铝陶瓷注射成型用黏结剂及混料工艺研究
- Study on Thermoplastic Binder and Mixing Technology for Alumina Ceramic Injection Molding
- 西安交通大学学报 2011年45卷第1期页码：127-131
- 作者机构：
  
  西安交通大学材料科学与工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： TQ174
- 网络首发：2011-01-10，
  
  纸质出版：2011
- 稿件说明：
移动端阅览
张笑, 鲍崇高, 乔冠军, 等. 氧化铝陶瓷注射成型用黏结剂及混料工艺研究[J]. 西安交通大学学报, 2011,45(1):127-131.

Study on Thermoplastic Binder and Mixing Technology for Alumina Ceramic Injection Molding[J]. 2011, 45(1): 127-131.
张笑, 鲍崇高, 乔冠军, 等. 氧化铝陶瓷注射成型用黏结剂及混料工艺研究[J]. 西安交通大学学报, 2011,45(1):127-131. DOI：

Study on Thermoplastic Binder and Mixing Technology for Alumina Ceramic Injection Molding[J]. 2011, 45(1): 127-131. DOI：

摘要

采用注射成型制备氧化铝陶瓷

分析了热塑性黏结剂含量、混料工艺对氧化铝陶瓷粉末注射成型浆料的流变性、成型性及注射生坯性能的影响.用TG-DSC分析了蜡基黏结剂体系的热特性

用SEM分析了注射成型生坯的显微结构.试验结果表明:选取聚丙烯、石蜡、硬脂酸3种黏结剂的质量比为20:70:10

氧化铝质量分数为80%

采用加热搅拌方式进行混料并结合一定的注射成型工艺

可得到成分均匀、无变形、无缺陷的氧化铝陶瓷生坯试样

烧结后试样的密度和抗弯强度较高.

Abstract

The effect of thermoplastic binder and the corresponding mixing technology for alumina ceramic injection molding on the rheology behavior

formability and mechanical properties are discussed. The thermal behavior of the binders is analyzed by TG-DSC

the microstructure of the green bodies is characterized by SEM. The results show that the adequate thermoplastic binders are made up by polypropylene

paraffin and stearic acid in the mass ratio of 20:70:10

and the mass fraction of alumina gets 80%. The density and three-bending strength of the sintered samples are improved by increasing the alumina and paraffin contents. The green alumina ceramics with fewer structural defects and excellent performances can be obtained when the rotational stirring heating-mixed technology is adopted.

关键词

Keywords

references

谢志鹏,罗杰盛,李建保. 陶瓷注射成型研究进展[J].陶瓷科学与艺术, 2003(5):16-18.

XIE Zhipeng, LUO Jiesheng, LI Jianbao. The development of ceramic injection molding [J]. Ceramics Science & Art, 2003(5):16-18.

REED J S. Principles of ceramic processing [M]. New York, USA: John Wiley Sons, 1995: 477.

SIE Lin. Near-net-shape forming of zirconia optical sleeves by ceramics injection molding [J]. Ceramics International, 2001,27(2):205-214.

LIU Z Y, LOH N H. Micro-powder injection molding [J]. Journal of Materials Processing Technology, 2002,127(2):165-168.

OLIVEIRA R V B, SOLDI V. Ceramic injection moulding: influence of specimen dimensions and temperature on solvent debinding kinetics [J]. Journal of Materials Processing Technology, 2005, 160(2):213-220.

李海普,钟宏,祝爱兰. 一种新型水溶性金属注射成形用粘结剂的研制[J]. 粉末冶金技术,2006,24(4):275-279.

LI Haipu, ZHONG Hong, ZHU Ailan. A novel water soluble binder for MIM [J]. Powder Metallurgy Technology, 2006, 24(4): 275-279.

雅菁,刘志峰,赵丹. 氧化铝陶瓷注射成型工艺的研究[J]. 天津城市建设学院学报,2007,13(3): 204-207.

YA Jing, LIU Zhifeng, ZHAO Dan. Study on injection molding technology for Al2O3 ceramic [J]. Journal of Tianjin Institute of Urban Construction, 2007, 13(3): 204-207.

祝爱兰,钟宏. 溶剂脱脂型MIM粘结剂的研究[J]. 材料导报,2002,16(8):62-64.

ZHU Ailan, ZHONG Hong. A study on metal powder injection melting binder of solvent debinding [J]. Materials Letter, 2002, 16(8): 62-64.

LIU Dean-Mo, TSENG Wenjea J. Influence of debinding rate, solid loading and binder formulation on the green microstructure and sintering behaviour of ceramic injection mouldings [J]. Ceramics International, 1998, 24(6): 471-481.

XIE Z P, HUANG Y, WU J G. Effects of powder characteristics and grinding process on fluidity of ceramic injection molding mixtures [J]. Journal of Materials Science Letters, 1995, 14(16):1165-1167.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

融合物理信息与深度算子网络的变压器绕组热-流场快速计算方法

冷库水平空气幕热湿阻隔性能数值模拟研究

混合电解槽阵列协同的风光耦合制氢系统双层多目标优化

离子液体改性燃料的电流体动力学效应研究

超临界水异常区域热力学特性研究