板式固体氧化物燃料电池的热应力分析

樊鹏飞; 张兄文; 李国君; 刘倩

您当前的位置：

首页 >

文章列表页 >

板式固体氧化物燃料电池的热应力分析

更新时间：2025-07-09

- 板式固体氧化物燃料电池的热应力分析
- Analysis on Thermal Stress of a Planar Solid Oxide Fuel Cell
- 西安交通大学学报 2012年46卷第7期页码：75-81
- 作者机构：
  
  西安交通大学热流科学与工程教育部重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： TM911.47
- 网络首发：2012-07-10，
  
  纸质出版：2012
- 稿件说明：
移动端阅览
樊鹏飞, 张兄文, 李国君, 等. 板式固体氧化物燃料电池的热应力分析[J]. 西安交通大学学报, 2012,46(7):75-81.

Analysis on Thermal Stress of a Planar Solid Oxide Fuel Cell[J]. 2012, 46(7): 75-81.
樊鹏飞, 张兄文, 李国君, 等. 板式固体氧化物燃料电池的热应力分析[J]. 西安交通大学学报, 2012,46(7):75-81. DOI：

Analysis on Thermal Stress of a Planar Solid Oxide Fuel Cell[J]. 2012, 46(7): 75-81. DOI：

摘要

为了深入掌握固体氧化物燃料电池(SOFC)的结构性能

进而提高其可靠性

在对SOFC的内部流动和电化学特性进行数值模拟

对顺流和逆流两种流动情况下板式SOFC内温度分布、电势特征和电流密度特征进行分析的基础上

将数值计算得到的温度场作为载荷施加到SOFC的热应力模型中

建立了数值模拟SOFC的有限元热应力模型

对SOFC关键结构中的三合一电极板中的热应力分布特征进行了分析研究.研究结果表明:相对于顺流形式

逆流形式燃料入口附近的温度梯度要大得多; 材料间热膨胀系数的不匹配导致了热应力的产生; 热应力的大小与温度分布和温度梯度密切相关.由于过大的热应力可能会导致SOFC结构开裂甚至破坏

该研究工作为SOFC单电池和电池堆的设计优化提供了重要的理论依据.

Abstract

A thermal stress finite element model for a planar solid oxide fuel cell(SOFC)was established to study the structural performance of SOFC and improve its reliability. Numerical simulations for both co-flow and counter-flow planar SOFCs were performed by coupling the SOFC electrochemical model with the Naive-Stokes equations. The distribution characteristics of temperature

electric potential and current density were analyzed based on the simulation results. The distribution characteristics of thermal stress in the SOFC positive electrode-electrolyte-negative electrode were investigated using the developed SOFC thermal stress finite-element model. The simulation results indicate that the temperature gradient near the fuel entrance for the counter-flow pattern is much greater than that for the co-flow pattern. The thermal stress is mainly attributed to the mismatches of coefficients of thermal expansion between different materials and is closely related to the temperature gradient and distribution. The thermal stress may lead to cracks and destroy the SOFC structure. This research provides theoretical basis for design and optimization of the SOFC cell and stack.

关键词

Keywords

references

MALZBENDER J, STEINBRECH R W. Advanced measurement techniques to characterize thermo-mechanical aspects of solid oxide fuel cells [J]. Journal of Power Sources, 2007, 173(1): 60-67.

YAKABE H, BABA Y, SAKURAI T, et al. Evaluation of the residual stress for anode-supported SOFCs [J]. Journal of Power Sources, 2004, 135(1/2): 9-16.

FERGUSON J R, FIARD J M, HERBIN R. Three-dimensional numerical simulation for various geometries of solid oxide fuel cells [J]. Journal of Power Sources, 1996, 58(2): 109-122.

YAKABE H, OGIWARA T, HISHINUMA M, et al. 3-D model calculation for planar SOFC [J]. Journal of Power Sources, 2001, 102(1/2): 144-154.

SELIMOVIC A, KEMM M, TORISSON T, et al. Steady state and transient thermal stress analysis in planar solid oxide fuel cells [J]. Journal of Power Sources, 2005, 145(2): 463-469.

WEIL K S, KOEPPEL B J. Thermal stress analysis of the planar SOFC bonded compliant seal design [J]. International Journal of Hydrogen Energy, 2008, 33(14): 3976-3990.

JIANG T L, CHEN M-H. Thermal-stress analyses of an operating planar solid oxide fuel cell with the bonded compliant seal design [J]. International Journal of Hydrogen Energy, 2009, 34(19): 8223-8234.

ZHANG X, LI G, LI J, et al. Numerical study on electric characteristics of solid oxide fuel cells [J]. Energy Conversion and Management, 2007, 48(3): 977-989.

CHAN S H, KHOR K A, XIA Z T. A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness [J]. Journal of Power Sources, 2001, 93(1/2): 130-140.

COSTAMAGNA P, HONEGGER K. Modeling at solid oxide heat exchanger integrated stacks and simulation at high fuel utilization [J]. Journal of the Electrochemical Society, 1998, 145(11): 3995-4007.

李维特,黄保海,毕仲波. 热应力理论分析及应用 [M]. 北京: 中国电力出版社, 2004.

ACHENBACH E. Annex: Ⅱ Modelling and evaluation of advanced solid oxide fuel cells, Final Report of Activity A2 [R]. Jülich, Germany: Forschungszentrum Jülich,1996:18-34.

陈弦, 杨杰, 蒲健, 等. 平板式 SOFC 结构热应力的有限元分析 [J]. 无机材料学报, 2007, 22(2): 339-343.

CHEN Xian, YANG Jie, PU Jian, et al. Finite element analysis of thermal stresses in planar SOFCs [J]. Journal of Inorganic Materials, 2007, 22(2): 339-343.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

液氢管路输运中静电积聚机理与电流密度分布特征研究

X射线辐照下聚酰亚胺材料空间电荷分布特性的数值模拟

天然气化学链和燃料电池耦合的氢电联产系统

异质裂隙内超临界CO2地热提取特性数值模拟研究

时序卷积网络在转子热固耦合应力预测及寿命评估中的应用