面向变压器叠片铁心涡流损耗评估的快速高精度多尺度计算方法

马新宇; 段娜娜; 慕小斌

doi:null

您当前的位置：

首页 >

文章列表页 >

面向变压器叠片铁心涡流损耗评估的快速高精度多尺度计算方法

更新时间：2026-06-23

- 面向变压器叠片铁心涡流损耗评估的快速高精度多尺度计算方法
- A Fast and High-Accuracy Multiscale Computational Method for Eddy-Current Loss Assessment in Transformer Laminated Cores
- 西安交通大学学报 2026年
- 作者机构：
  
  1.西安交通大学电气工程学院，710049，西安
  2.中国电力科学研究院有限公司先进输电技术全国重点实验室，102209，北京
- 作者简介：
- 基金信息：
- DOI：
  中图分类号： TM153
- 收稿：2026-05-08，
  
  修回：2026-06-23，
  
  录用：2026-06-23，
- 稿件说明：
移动端阅览
马新宇, 段娜娜, 慕小斌. 面向变压器叠片铁心涡流损耗评估的快速高精度多尺度计算方法[J/OL]. 西安交通大学学报, 2026.

MA Xinyu, DUAN Nana, MU Xiaobin. A Fast and High-Accuracy Multiscale Computational Method for Eddy-Current Loss Assessment in Transformer Laminated Cores[J/OL]. JOURNAL OF XI’AN JIAOTONG UNIVERSITY, 2026.
马新宇, 段娜娜, 慕小斌. 面向变压器叠片铁心涡流损耗评估的快速高精度多尺度计算方法[J/OL]. 西安交通大学学报, 2026. DOI：

MA Xinyu, DUAN Nana, MU Xiaobin. A Fast and High-Accuracy Multiscale Computational Method for Eddy-Current Loss Assessment in Transformer Laminated Cores[J/OL]. JOURNAL OF XI’AN JIAOTONG UNIVERSITY, 2026. DOI：

摘要

为满足高效节能变压器设计中叠片铁心涡流损耗快速、准确评估的需求，针对传统有限元法精细建模计算量大、现有多尺度有限元法因富集函数缺乏物理针对性而导致局部涡流场及损耗计算误差较大的问题，提出一种基于本征函数先验知识的变压器叠片铁心涡流损耗快速高精度多尺度计算方法。首先，根据矢量磁位在叠片区域内满足的双曲余弦分布特征，提取能够反映叠片内部场量变化规律的本征函数，并将其作为先验信息引入多尺度有限元框架。然后，结合水平集函数与单位分解法，构造能够刻画材料交界面及边缘集肤效应区域非线性场量变化的富集函数，实现叠片铁心局部涡流场的低自由度求解；在此基础上，根据涡流密度分布计算局部涡流损耗密度及单位长度涡流损耗。最后，以模拟变压器局部叠片铁心电磁行为的二维线圈-叠片模型进行验证。结果表明：以传统有限元法在精细剖分下的计算结果为基准，所提方法在网格节点数和自由度分别减少97.99%和97.41%的条件下，计算时间由628 s降至51 s，缩短91.88%；与原有多尺度有限元法相比，在相同粗网格条件下，所提方法使矢量磁位平均相对误差降低98.80%，单位长度涡流损耗相对误差降低96.77%。研究结果表明，所提方法能够在极低网格密度下同时降低计算规模、缩短计算时间并提高局部场量与涡流损耗计算精度，可为变压器叠片铁心涡流损耗评估及精细化电磁分析提供高效计算工具。

Abstract

To meet the demand for fast and accurate eddy-current loss assessment in laminated cores for energy-efficient transformer design

this paper proposes a fast and high-accuracy multiscale computational method based on eigenfunction-informed prior knowledge. The method addresses the high computational cost of refined modeling in the conventional finite element method (FEM)

as well as the relatively large errors in local eddy-current field and loss calculations caused by the lack of physical relevance in the enrichment functions used in existing multiscale finite element methods (MSFEMs). First

according to the hyperbolic-cosine distribution characteristic satisfied by the magnetic vector potential in the laminated region

an eigenfunction capable of representing the field variation inside the laminations is extracted and introduced into the MSFEM framework as prior information. Then

by combining the level-set function with the partition of unity method

an enrichment function is constructed to characterize the nonlinear field variation near material interfaces and edge skin-effect regions

enabling a low-degree-of-freedom solution of the local eddy-current field in the laminated core. On this basis

the local eddy-current loss density and the eddy-current loss per unit length are calculated from the eddy-current density distribution. Finally

the proposed method is validated using a two-dimensional coil-lamination model that represents the local electromagnetic behavior of a transformer laminated core. The results show that

using the fine-mesh FEM result as the reference

the proposed method reduces the number of mesh nodes and degrees of freedom by 97.99% and 97.41%

respectively

while reducing the computational time from 628 s to 51 s

corresponding to a reduction of 91.88%. Compared with the original MSFEM under the same coarse-mesh condition

the proposed method reduces the average relative error of the magnetic vector potential by 98.80% and the relative error of the eddy-current loss per unit length by 96.77%. These results demonstrate that the proposed method reduces the computational scale and time while improving the accuracy of local field calculation and eddy-current loss assessment under an extremely low mesh density

providing an efficient computational tool for eddy-current loss assessment and refined electromagnetic analysis of transformer laminated cores.

关键词

Keywords

references

工业和信息化部办公厅 , 市场监管总局办公厅 , 国家能源局综合司 . 关于印发《变压器能效提升计划（2021-2023年）》的通知：工信厅联节〔2020〕 69 号[EB/OL ] .（ 2021-01-15 ）[ 2026-06-21 ] . https://www.miit.gov.cn/zwgk/zcwj/wjfb/tz/art/2021/art_fd74b3be8f054a8792bbac2d6a65cef7.html https://www.miit.gov.cn/zwgk/zcwj/wjfb/tz/art/2021/art_fd74b3be8f054a8792bbac2d6a65cef7.html .

国家市场监督管理总局 , 国家标准化管理委员会 . 电力变压器能效限定值及能效等级： GB 20052—2024 [S ] . 北京 : 中国标准出版社 , 2024 .

Harlow J H . 电力变压器工程 [M ] . 保定天威保变电气股份有限公司, 译. 3版 . 北京 : 机械工业出版社 , 2016 .

国家市场监督管理总局 , 国家标准化管理委员会 . 电力变压器第7部分：油浸式电力变压器负载导则： GB/T 1094.7—2024 [S ] . 北京 : 中国标准出版社 , 2024 .

谢裕清 , 李琳 , 宋雅吾 , 等 . 油浸式电力变压器绕组温升的多物理场耦合计算方法 [J ] . 中国电机工程学报 , 2016 , 36 ( 21 ): 5957 - 5965 .

Xie Yuqing , Li Lin , Song Yawu , et al . Multi-physical field coupled method for temperature rise of winding in oil-immersed power transformer [J ] . Proceedings of the CSEE , 2016 , 36 ( 21 ): 5957 - 5965 .

Frljić S , Trkulja B , Žiger I . Calculation of the eddy current losses in a laminated open-type transformer cor e based on the A , T - A formulation [J ] . Applied Sciences , 2021 , 11 ( 23 ): 11543 .

Frljić S , Trkulja B , Drandić A . Eddy current losses in power voltage transformer open-type cores [J ] . COMPEL , 2023 , 42 ( 5 ): 1039 - 1051 .

Nakata T , Takahashi N , Kawase Y . Magnetic performance of step-lap joints in distribution transformer cores [J ] . IEEE Transactions on Magnetics , 1982 , 18 ( 6 ): 1055 - 1057 .

王坚 , 林鹤云 , 房淑华 , 等 . 利用等效电导率进行叠片铁心涡流场分析的有效性和精确性 [J ] . 中国电机工程学报 , 2012 , 32 ( 27 ): 162 - 168 .

Wang Jian , Lin Heyun , Fang Shuhua , et al . Validity and accuracy of eddy current field analysis of laminations by introducing equivalent conductivities [J ] . Proceedings of the CSEE , 2012 , 32 ( 27 ): 162 - 168 .

张天淼 , 李琳 . 利用等效复磁导率幅值对硅钢叠片铁心的改进均质化方法 [J ] . 电工电能新技术 , 2024 , 43 ( 3 ): 56 - 64 .

Zhang Tianmiao , Li Lin . Improved homogenization method of silicon steel laminated core using equivalent complex permeability amplitude [J ] . Advanced Technology of Electrical Engineering and Energy , 2024 , 43 ( 3 ): 56 - 64 .

Dular P , Gyselinck J , Krähenbühl L . A time-domain finite element homogenization technique for lamination stacks using skin effect sub-basis functions [J ] . COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering , 2006 , 25 ( 1 ): 6 - 16 .

Frljic S , Drandic A , Trkulja B . Numerical homogenization for the calculation of eddy current losses in a laminated open core [J ] . IEEE Access , 2024 , 12 : 169163 - 169169 .

Jurkovic Z , Trkulja B , Petrovic K , et al . Quasi-3D calculation of stray losses in outer lamination stack of power transformer core [J ] . IEEE Access , 2025 , 13 : 119279 - 119291 .

Hou T Y , Wu Xiaohui . A multiscale finite element method for elliptic problems in composite materials and porous media [J ] . Journal of Computational Physics , 1997 , 134 ( 1 ): 169 - 189 .

Hollaus K , Schöberl J . Some 2-D multiscale finite-element formulations for the eddy current problem in iron laminates [J ] . IEEE Transactions on Magnetics , 2018 , 54 ( 4 ): 1 - 16 .

Hollaus K , Schöberl J . Multi-scale FEM and magnetic vector potential A for 3D eddy currents in laminated media [J ] . COMPEL , 2015 , 34 ( 5 ): 1598 - 1608 .

Schöbinger M , Steentjes S , Schöberl J , et al . MSFEM for the eddy current problem in a laminated core including hysteresis [J ] . IEEE Transactions on Magnetics , 2019 , 55 ( 8 ): 1 - 9 .

Schöbinger M , Hollaus K . A novel MSFEM approach based on the a-formulation for eddy currents in iron sheets [J ] . IEEE Transactions on Magnetics , 2023 , 59 ( 5 ): 1 - 4 .

Duan Nana , Xu Weijie , Wang Shuhong , et al . An improved XFEM with multiple high-order enrichment functions and low-order meshing elements for field analysis of electromagnetic devices with multiple nearby geometrical interfaces [J ] . IEEE Transactions on Magnetics , 2015 , 51 ( 3 ): 1 - 4 .

Duan Nana , Xu Weijie , Wang Shuhong , et al . Current distribution calculation of superconducting layer in HTS cable considering magnetic hysteresis by using XFEM [J ] . IEEE Transactions on Magnetics , 2018 , 54 ( 3 ): 1 - 4 .

Wang Guolin , Wang Shuhong , Duan Nana , et al . Extended finite-element method for electric field analysis of insulating plate with crack [J ] . IEEE Transactions on Magnetics , 2015 , 51 ( 3 ): 1 - 4 .

盛剑霓 . 电磁场与波分析中半解析法的理论方法与应用 [M ] . 北京 : 科学出版社 , 2006 .

马齐爽 , 盛剑霓 . 用通用解析法求解二维无界场的电场分布 [J ] . 西安交通大学学报 , 1993 , 27 ( 6 ): 35 - 40 .

Ma Qishuang , Sheng Jianni . A general analytical method for solving 2-D unbounded electrostatic field [J ] . Journal of Xi'an Jiaotong University , 1993 , 27 ( 6 ): 35 - 40 .

马齐爽 , 盛剑霓 . 通用级数法求解轴对称磁场 [J ] . 中国电机工程学报 , 1994 , 14 ( 5 ): 50 - 55 .

Ma Qishuang , Sheng Jianni . Sloving axisymmetric magnetic field by a general series method [J ] . Proceedings of the CSEE , 1994 , 14 ( 5 ): 50 - 55 .

闫照文 , 王恒利 , 盛剑霓 . 基于分域解的新型等效源法 [J ] . 西安交通大学学报 , 1999 , 33 ( 4 ): 17 - 20 .

Yan Zhaowen , Wang Hengli , Sheng Jianni . Refined equivalent source method using subregion solution [J ] . Journal of Xi'an Jiaotong University , 1999 , 33 ( 4 ): 17 - 20 .

Melenk J M , Babuška I . The partition of unity finite element method: basic theory and applications [J ] . Computer Methods in Applied Mechanics and Engineering , 1996 , 139 ( 1/4 ): 289 - 314 .

Duarte C A , Oden J T . An h-p adaptive method using clouds [J ] . Computer Methods in Applied Mechanics and Engineering , 1996 , 139 ( 1 ): 237 - 262 .

王金铭 . 工程电磁场耦合问题分析的若干数值技术研究 [D ] . 沈阳 : 沈阳工业大学 , 2006 .

谢德馨 . 三维涡流场的有限元分析 [M ] . 北京 : 机械工业出版社 , 2001 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于励磁电感参数识别的变压器励磁涌流判别方法

变压器绕组对局部放电电磁波传播特性的影响

级联H桥型多电平逆变器中变压器偏磁抑制控制方法研究

突发短路条件下变压器绕组振动特性的仿真研究

传热学与电学问题的迁移类比研究:(2)工程实践