赵兴堂.仿生微织构对滑动轴承摩擦磨损性能的影响研究[D].山东科技大学,2020(06).

杨丁槐.微沟槽特性对不锈钢织构化表面摩擦特性影响研究[D].哈尔滨工业大学,2019(02).

李志恒.油气润滑工作参数对滚动轴承润滑性能的影响[D].青岛理工大学,2016(06).

李桂枝,白清华,栗心明,杨萍,郭峰,金旭阳.定量供油下球-环/球-盘接触形式润滑特性对比[J].摩擦学学报,2022(04).

李潇潇,闫柯,葛临风,朱永生,洪军.高速球轴承喷油润滑流场特性研究[J].西安交通大学学报,2019(12).

刘红彬,刘公平,郝金华,杨梦科.不同轴承壁面沟槽诱导油液穿透机理[J].航空动力学报,2019(05).

朱卫兵,张小彬,鲁勇帅,王冬兰.润滑方式对球轴承润滑性能影响的数值研究[J].推进技术,2019(04).

郑文斌,裴世源,洪军.表面微织构对滑动轴承支撑主轴稳定性的影响[J].西安交通大学学报,2018(05).

王煜,闫柯,张进华.我国高性能滚动轴承基础研究进展[J].中国基础科学,2015(06).

翟强,闫柯,张优云,洪军,朱永生.高速角接触球轴承腔内气相流动与传热特性研究[J].西安交通大学学报,2014(12).

巩彬彬,张俊国,王建文,安琦,刘厚飞,张鹏.油气进口位置和进气量对油气润滑滚动轴承性能影响的研究[J].润滑与密封,2006(11).

Wu Wei,Wei Chunhui,Yuan Shihua.Numerical simulation of ball bearing flow field using the moving particle semi-implicit method[J].Engineering Applications of Computational Fluid Mechanics,2022.

Ge Linfeng,Wang Chao,Yan Ke,Zhu Yongsheng,Hong Jun.Design of groove structures for bearing lubrication enhancement based on the flow mechanism analysis[J].Tribology International,2021.

Li Miaomiao,Wang Yu,Chen Weifang,Zhu Rupeng.Temperature rise characteristics for angular-contact ball bearings with oil-air lubrication based on fluid-solid conjugate heat transfer[J].Advances in Mechanical Engineering,2021.

Chao Chen,Xiaojing Wang,Yifan Shen,Zhaolun Li,Jian Dong.Experimental investigation for vibration reduction of surface-textured journal bearings[J].Industrial Lubrication and Tribology,2019.

Yunlong Jiao,Xiaojun Liu,Kun Liu.Wettability of laser textured surface: a parametric study based on numerical simulation and experimentation[J].Industrial Lubrication and Tribology,2018.

Ke Yan,Lei Dong,Junhao Zheng,Baotong Li,Dongfeng Wang,Yujie Sun.Flow performance analysis of different air supply methods for high speed and low friction ball bearing[J].Tribology International,2018.

Li Yulong,Wang Wenzhong,Wang Yunlong,Zhao Ziqiang.Lubrication and Thermal Failure Mechanism Analysis in High-Speed Angular Contact Ball Bearing[J].Journal of Tribology,2017.

Wei Wu,Chenhui Hu,Jibin Hu,Shihua Yuan,Ran Zhang.Jet cooling characteristics for ball bearings using the VOF multiphase model[J].International Journal of Thermal Sciences,2017.

Wei Wu,Chenhui Hu,Jibin Hu,Shihua Yuan.Jet cooling for rolling bearings: Flow visualization and temperature distribution[J].Applied Thermal Engineering,2016.

Sihuan Yuan,Wei Huang,Xiaolei Wang.Orientation effects of micro-grooves on sliding surfaces[J].Tribology International,2011.

Cheng-Hsien Wu,Yu-Tai Kung.A parametric study on oil/air lubrication of a high-speed spindle[J].Precision Engineering,2004.