Park Sehjin,Kim JeongJu,Bang Minho,Moon Hee Koo,Ueda Osamu,Cho Hyung Hee.Effects of seal installation in the mid-passage gap between turbine blade platforms on film cooling[J].Applied Thermal Engineering,2021.

Kaiyuan Zhang,Jun Li,Zhigang Li,Liming Song.Effects of simulated swirl purge flow and mid-passage gap leakage on turbine blade platform cooling and suction surface phantom cooling performance[J].International Journal of Heat and Mass Transfer,2019.

Hao Liu,Chenxing Hu,Xin Shen,Xiaocheng Zhu,Hong Yang,Zhaohui Du.The aerodynamic optimization design of turbine cascade nonaxisymmetric endwall and the midgap influence assessment[J].Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering,2018.

Chowdhury Nafiz H. K.,Shiau Chao Cheng,Han Je Chin,Zhang Luzeng,Moon Hee Koo.Turbine Vane Endwall Film Cooling With Slashface Leakage and Discrete Hole Configuration[J].Journal of Turbomachinery,2017.

Chen Andrew F,Shiau Chao Cheng,Han Je Chin.Turbine Blade Platform Film Cooling With Simulated Swirl Purge Flow and Slashface Leakage Conditions[J].Journal of Turbomachinery,2017.

Hada Satoshi,Thole Karen A..Computational Study of a Midpassage Gap and Upstream Slot on Vane Endwall Film-Cooling[J].Journal of Turbomachinery,2011.

Piggush J. D.,Simon T. W..Heat Transfer Measurements in a First-Stage Nozzle Cascade Having Endwall Contouring: Misalignment and Leakage Studies[J].Journal of Turbomachinery,2007.

Reid Kevin,Denton John,Pullan Graham,Curtis Eric,Longley John.The Interaction of Turbine Inter-Platform Leakage Flow With the Mainstream Flow[J].Journal of Turbomachinery,2007.

Cardwell N. D.,Sundaram N.,Thole K. A..Effect of Midpassage Gap, Endwall Misalignment, and Roughness on Endwall Film-Cooling[J].Journal of Turbomachinery,2006.

Ranson W. W.,Thole K. A.,Cunha F. J..Adiabatic Effectiveness Measurements and Predictions of Leakage Flows Along a Blade Endwall[J].Journal of Turbomachinery,2005.

Knost D. G.,Thole K. A..Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First-Stage Vane[J].Journal of Turbomachinery,2005.

Aunapu Nicole V.,Volino Ralph J.,Flack Karen A.,Stoddard Ryan M..Secondary Flow Measurements in a Turbine Passage With Endwall Flow Modification[J].Journal of Turbomachinery,2000.

任静,李雪英,郭欣欣,王善友,许浩楠.燃气涡轮高效冷却技术及设计方法发展趋势[J].清华大学学报(自然科学版),2022(04).

张杰,刘存良,张丽,朱惠人,姚春意,杨寓全.槽缝射流和泄漏间隙对轴对称涡轮端壁换热特性的影响[J].推进技术,2022(04).

刘钊,贾哲,张志欣,丰镇平.透平动叶前缘冲击-气膜复合冷却与旋流-气膜复合冷却的热流耦合对比研究[J].西安交通大学学报,2021(04).

张韦馨,刘战胜,杨星,刘钊,丰镇平.射流角和质量流量比对涡轮端壁气膜冷却特性的影响[J].西安交通大学学报,2021(04).

祝培源,陶志,姚韵嘉,宋立明,李军.槽缝射流对环形叶栅端壁气膜冷却性能影响的实验研究[J].西安交通大学学报,2019(11).

姚韵嘉,祝培源,陶志,宋立明,李军.间隙射流对端壁气膜冷却性能影响的实验研究[J].西安交通大学学报,2019(03).

张垲垣,李志刚,宋立明,李军.槽缝射流旋流比和密度比对涡轮端壁冷却和吸力面泛冷却性能的影响[J].西安交通大学学报,2018(09).

杨星,刘钊,刘战胜,丰镇平.端壁错位对端壁泄漏流冷却的影响研究[J].工程热物理学报,2017(04).

杨星,刘钊,刘战胜,丰镇平.端壁通道间隙对端壁泄漏流冷却的影响[J].工程热物理学报,2017(01).

杜昆,李军,晏鑫.槽缝射流对静叶端壁冷却性能的影响[J].西安交通大学学报,2015(01).

杨星,刘钊,丰镇平.燃气轮机透平叶片传热和冷却研究:端壁冷却[J].热力透平,2014(02).

高杰,郑群,姜玉廷.涡轮间隙流动结构及其损失产生机理研究[J].工程热物理学报,2013(10).