张韦馨,刘战胜,杨星,刘钊,丰镇平.射流角和质量流量比对涡轮端壁气膜冷却特性的影响[J].西安交通大学学报,2021(04).

王志多,牟善聪,王志豪,丰镇平.进口旋流对热斑和端壁槽缝泄漏流迁移影响的研究[J].工程热物理学报,2019(02).

杨星,王岩,丰镇平.1.5级透平动叶端壁泄漏流换热与冷却研究[J].工程热物理学报,2018(01).

王志多,王典,张文豪,王志豪,丰镇平.进口总压不均匀性对燃气透平端壁气热特性影响的研究[J].推进技术,2017(10).

杨星,刘钊,刘战胜,丰镇平.端壁错位对端壁泄漏流冷却的影响研究[J].工程热物理学报,2017(04).

杨星,刘钊,刘战胜,丰镇平.端壁通道间隙对端壁泄漏流冷却的影响[J].工程热物理学报,2017(01).

杨星,刘钊,丰镇平.燃气轮机透平叶片传热和冷却研究:端壁冷却[J].热力透平,2014(02).

Yang Xing,Zhao Qiang,Wu Hang,Hao Zihan,Feng Zhenping.Heat transfer measurements of a turbine endwall with engine-representative freestream turbulence and inlet swirl[J].Experimental Heat Transfer,2022.

Yang Xing,Wu Yongqiang,Zhao Qiang,Feng Zhenping.Study on film cooling for aero-engine turbine endwalls with various small-scale surface structures[J].Aerospace Science and Technology,2022.

Shaanxi Engineering Laboratory of Turbomachinery and Power Equipment, Institute of Turbomachinery, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049, China,Shaanxi Engineering Laboratory of Turbomachinery and Power Equipment, Institute of Turbomachinery, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049, China,Shaanxi Engineering Laboratory of Turbomachinery and Power Equipment, Institute of Turbomachinery, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049, China,Shaanxi Engineering Laboratory of Turbomachinery and Power Equipment, Institute of Turbomachinery, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049, China,Shaanxi Engineering Laboratory of Turbomachinery and Power Equipment, Institute of Turbomachinery, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049, China,Shanghai Center of Research for Commercial Aircraft Engine Engineering Techniques, AECC Commercial Aircraft Engine Co., LTD, Shanghai 200241, China,Shanghai Center of Research for Commercial Aircraft Engine Engineering Techniques, AECC Commercial Aircraft Engine Co., LTD, Shanghai 200241, China,Department of Mechanical Engineering, University of Minnesota Twin Cities, Minneapolis, MN 55455, USA.Conjugate heat transfer measurements and predictions for the vane endwall of a high-pressure turbine with upstream purge flow[J].International Journal of Heat and Mass Transfer,2019.

Yang Xing,Liu Zhao,Liu Zhansheng,Simon Terrence,Feng Zhenping.Endwall Film Cooling Performance for a First-Stage Guide Vane With Upstream Combustor Walls and Inlet Injection[J].Journal of Thermal Science and Engineering Applications,2019.

Xing Yang,Zhansheng Liu,Qiang Zhao,Zhao Liu,Zhenping Feng,Fushui Guo,Liang Ding,Terrence W. Simon.Experimental and numerical investigations of overall cooling effectiveness on a vane endwall with jet impingement and film cooling[J].Applied Thermal Engineering,2019.

Yang Xing,Liu Zhao,Liu Zhansheng,Feng Zhenping,Simon Terrence W..Combustor Wall Coolant Discharge Effects on Turbine Vane Endwall Curtain Cooling[J].Journal of Thermophysics and Heat Transfer,2018.

Xueying Li,Jing Ren,Hongde Jiang.Influence of coolant mass flow rate on the endwall conjugate heat transfer[J].International Journal of Thermal Sciences,2018.

M.G. Rashed,Mahmud Ashraf,R.A.W. Mines,Paul J. Hazell.Metallic microlattice materials: A current state of the art on manufacturing, mechanical properties and applications[J].Materials & Design,2016.

Mensch Amy,Thole Karen A..Overall Effectiveness and Flowfield Measurements for an Endwall With Nonaxisymmetric Contouring[J].Journal of Turbomachinery,2016.

Mensch Amy,Thole Karen.Simulations of Multiphase Particle Deposition on a Gas Turbine Endwall With Impingement and Film Cooling[J].Journal of Turbomachinery,2015.

Mensch Amy,Thole Karen A.,Craven Brent A..Conjugate Heat Transfer Measurements and Predictions of a Blade Endwall With a Thermal Barrier Coating[J].Journal of Turbomachinery,2014.

H.B. Yan,Q.C. Zhang,T.J. Lu,T. Kim.A lightweight X-type metallic lattice in single-phase forced convection[J].International Journal of Heat and Mass Transfer,2015.

T. Kim,H.P. Hodson,T.J. Lu.Contribution of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralightweight lattice material[J].International Journal of Heat and Mass Transfer,2005.

Kim Tongbeum.Fluid-flow and heat-transfer in a lattice-frame material[J].University of Cambridge,2004.

Friedrichs Stefan.Endwall film-cooling in axial flow turbines[J].University of Cambridge,1997.