Zhang Shichao,Lee Hyungyu,Cho Geonhwan,Kim Donghwa,Cho Jinsoo.Optimization of Receiver Hole to Improve Discharge Coefficient and Temperature Drop Effectiveness of Gas Turbine Pre-swirl System Using CFD Analysis[J].The KSFM Journal of Fluid Machinery,2019.

Liu Yuxin,Liu Gaowen,Kong Xiaozhi,Wang Yangang.Design and Numerical Analysis of a Vane Shaped Receiver Hole in a Cover-Plate Preswirl System[J].Journal of Engineering for Gas Turbines and Power,2019.

Maeng D. J.,Lee J. S.,Jakoby R.,Kim S.,Wittig S..Characteristics of Discharge Coefficient in a Rotating Disk System[J].Journal of Engineering for Gas Turbines and Power,1999(4).

Wittig S.,Kim S.,Jakoby R.,Wei?ert I..Experimental and Numerical Study of Orifice Discharge Coefficients in High-Speed Rotating Disks[J].Journal of Turbomachinery,1996(2).

雷昭,刘高文,吴衡,冯青,郑龙席.盖板式预旋系统温降特性的实验研究[J].工程热物理学报,2020(08).

张凯,王锁芳,侯晓亭,韦光礼.狭缝型接受孔对径向预旋系统的影响[J].航空动力学报,2020(05).

郑笑天,王锁芳,韦光礼.接受孔形状对预旋供气系统内气流流动影响研究[J].推进技术,2020(10).

侯伟韬,王新军,李炎栋.接收孔周向倾角对预旋转静盘腔流动特性的影响[J].西安交通大学学报,2019(11).

吴衡,刘高文,冯青,武志鹏.盖板式预旋系统的压比和熵增特性[J].推进技术,2019(10).

刘育心,刘高文,孔晓治,王掩刚.叶型预旋喷嘴流动及温降特性实验与计算研究[J].推进技术,2019(04).

陈帆,王锁芳,张光宇,王海.接受孔角度对预旋系统流动特性影响的数值研究[J].推进技术,2018(07).

张建超,王锁芳,王春凤,徐昊,马力.接受孔对预旋系统温降特性的影响[J].重庆理工大学学报(自然科学),2014(03).

朱晓华,刘高文,刘松龄,冯青.带盖板的预旋系统温降和压力损失数值研究[J].航空动力学报,2010(11).