王黎钦, 著.滚动轴承的极限设计[M].哈尔滨工业大学出版社,2013.

张涛,陈晓阳,顾家铭,李清清.高速角接触球轴承保持架稳定性研究进展[J].航空学报,2018(07).

邓四二,顾金芳,崔永存,孙朝阳.高速圆柱滚子轴承保持架动力学特性分析[J].航空动力学报,2014(01).

张占立,王燕霜,邓四二,刘喆.高速圆柱滚子轴承动态特性分析[J].航空动力学报,2011(02).

谢鹏飞,苏敏,姜艳红,梁晓东,邓四二.基于ADAMS的双半内圈角接触球轴承动态性能分析[J].轴承,2010(08).

陈海卫,张秋菊.C语言在ADAMS用户定义子程序中的应用[J].机电一体化,2008(04).

纪玉杰,杨强,孙志礼,李良巧.应用C语言编写ADAMS用户自定义函数的研究[J].机械设计与制造,2006(01).

赫雄.ADAMS动力学仿真算法及参数设置分析[J].传动技术,2005(03).

张军飞.双列圆锥滚子轴承的动力学分析模型[D].大连理工大学,2019(02).

李琦.基于ADAMS的角接触球轴承的动力学分析与结构优化[D].广东工业大学,2016(11).

关猛.基于ADAMS的高性能轴承动态性能分析[D].合肥工业大学,2014(07).

Ge Linfeng,Wang Chao,Yan Ke,Zhu Yongsheng,Hong Jun.Design of groove structures for bearing lubrication enhancement based on the flow mechanism analysis[J].Tribology International,2021.

Yuanqing Liu,Wenzhong Wang,He Liang,Tao Qing,Yunlong Wang,Shaohua Zhang.Nonlinear Dynamic Behavior of Angular Contact Ball Bearings under Microgravity and Gravity[J].International Journal of Mechanical Sciences,2020.

Tingqiang Yao,Lihua Wang,Xiaobao Liu,Yayu Huang.Multibody dynamics simulation of thin-walled four-point contact ball bearing with interactions of balls, ring raceways and crown-type cage[J].Multibody System Dynamics,2020.

Ke Yan,Yatai Wang,Yongsheng Zhu,Jun Hong,Qiang Zhai.Investigation on heat dissipation characteristic of ball bearing cage and inside cavity at ultra high rotation speed[J].Tribology International,2016.

M Sarangi,B C Majumdar,A S Sekhar.Stiffness and damping characteristics of lubricated ball bearings considering the surface roughness effect. Part 1: Theoretical formulation[J].Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,2004.

Gupta P. K..Transient Ball Motion and Skid in Ball Bearings[J].Journal of Lubrication Technology,1975(2).