肖敬美.三叶孔板换热器壳程传热性能数值模拟及结构优化设计[D].华东理工大学,2015(12).

焦兰.三叶孔整圆形支撑板换热器的实验及数值模拟研究[D].华中科技大学,2011(07).

孙中宁.核动力设备[M].哈尔滨工程大学出版社,2017.

中国石化集团上海工程有限公司, 组织编写.换热器[M].化学工业出版社,2008.

古新,罗元坤,熊晓朝,王珂,陶智麟.扭转流换热器结构参数对流场和温度场的影响[J].化工学报,2018(08).

董新宇,毕勤成,贺宇峰,王腾,桂淼.钛合金螺旋扁管换热器流阻与传热性能实验研究[J].西安交通大学学报,2018(01).

古新,潘国华,王珂.三叶孔板换热器周期性充分发展段界定[J].高校化学工程学报,2016(03).

王斯民,王萌萌,顾昕,简冠平,文键.螺旋折流板换热器结构参数多目标优化的数值模拟[J].西安交通大学学报,2015(11).

王丹,王珂,王永庆,刘敏珊.双波纹流道中的流体流动特性及LDV实验[J].化工学报,2014(10).

杨元龙,孙宝芝,张国磊,张鹏.支撑板对蒸汽发生器流动与传热特性的影响[J].上海交通大学学报,2014(02).

董其伍,白彩鹏,刘敏珊,王丹.三叶孔板换热器壳程流体流动和传热研究[J].工程热物理学报,2013(01).

Xin Gu,Yuankun Luo,Xiaochao Xiong,Ke Wang,Yongqing Wang.Numerical and experimental investigation of the heat exchanger with trapezoidal baffle[J].International Journal of Heat and Mass Transfer,2018.

Jianxin Shi,Baozhi Sun,Xiang Yu,Guolei Zhang,Peng Zhang.Modeling the influence of tube support plates on flow boiling and dryout of once-through steam generators[J].International Journal of Heat and Mass Transfer,2018.

Mustapha Mellal,Redouane Benzeguir,Djamel Sahel,Houari Ameur.Hydro-thermal shell-side performance evaluation of a shell and tube heat exchanger under different baffle arrangement and orientation[J].International Journal of Thermal Sciences,2017.

Lu Ma,Ke Wang,Minshan Liu,Dan Wang,Tong Liu,Yongqing Wang,Zunchao Liu.Numerical study on performances of shell-side in trefoil-hole and quatrefoil-hole baffle heat exchangers[J].Applied Thermal Engineering,2017.

Baozhi Sun,Jianxin Shi,Liu Yang,Longbin Yang,Yanjun Li,Shanghua Liu.Modeling the thermal stress of heat transfer tubes with tube support plate gaps in a steam generator[J].Annals of Nuclear Energy,2016.

Yonghua You,Aiwu Fan,Xuejiang Lai,Suyi Huang,Wei Liu.Experimental and numerical investigations of shell-side thermo-hydraulic performances for shell-and-tube heat exchanger with trefoil-hole baffles[J].Applied Thermal Engineering,2013.

Baozhi Sun,Yuanlong Yang.Numerically investigating the influence of tube support plates on thermal-hydraulic characteristics in a steam generator[J].Applied Thermal Engineering,2013.