Marko Simic,Niko Herakovic.Reduction of the flow forces in a small hydraulic seat valve as alternative approach to improve the valve characteristics[J].Energy Conversion and Management,2015.

José R. Valdés,José M. Rodríguez,Javier Saumell,Thomas Pütz.A methodology for the parametric modelling of the flow coefficients and flow rate in hydraulic valves[J].Energy Conversion and Management,2014.

Li Xiaotian,Wang Anlin.Definitions of causality in bond graph model for efficient simulation mechanism[J].Mechanism and Machine Theory,2014.

Balaji Mohan,Wenming Yang,Siaw kiang Chou.Development of an accurate cavitation coupled spray model for diesel engine simulation[J].Energy Conversion and Management,2014.

E. Lisowski,W. Czyżycki,J. Rajda.Three dimensional CFD analysis and experimental test of flow force acting on the spool of solenoid operated directional control valve[J].Energy Conversion and Management,2013.

Paolo Casoli,Alvin Anthony.Gray box modeling of an excavator’s variable displacement hydraulic pump for fast simulation of excavation cycles[J].Control Engineering Practice,2013.

Jixin Wang,Jianhua Zhang,Yunlong Liang,Yonghai Yang.A cyclic simulation approach for the generation of the non-stationary load histories of engineering vehicles[J].Journal of Mechanical Science and Technology,2012.

Soo-Jin Lee,Pyung-Hun Chang.Modeling of a hydraulic excavator based on bond graph method and its parameter estimation[J].Journal of Mechanical Science and Technology,2012.

陈源流,王安麟,张小路.多路阀阀芯拓扑形态设计的流量数参数模型[J].西安交通大学学报,2019(05).

王安麟,唐姜炜,张小路.面向多路阀结构拓扑设计的多工况综合性能评价[J].华南理工大学学报(自然科学版),2018(09).

《中国公路学报》编辑部.中国筑路机械学术研究综述·2018[J].中国公路学报,2018(06).

王安麟,况龙,张小路.换向滑阀组合节流槽流量系数研究[J].西安交通大学学报,2018(02).

王安麟,况龙,张小路.多路阀耦合节流槽结构的拓扑变量空间优化[J].西安交通大学学报,2017(06).

姜涛,付志翼,王安麟.一种非平稳随机循环工况下的参数化载荷模型[J].东北大学学报(自然科学版),2016(06).

姜涛,黄伟,王安麟.多路换向阀换向耦合阀口节流结构拓扑设计[J].西安交通大学学报,2016(08).

王安麟,王坚,付志翼.挖掘机虚拟载荷下换向阀开启过程的液动力分析[J].东北大学学报(自然科学版),2015(08).

官通,郭勇,尹升,陈桂芳.小型液压挖掘机动臂联阀口的流量特性[J].机械设计与研究,2014(02).

江涛,李维嘉,彭勇,易迪升.起重机液压换向阀建模及仿真研究[J].计算机仿真,2014(03).

王安麟,石世宁,李晓田.挖掘机动态性能试验及其数据的小波处理方法[J].同济大学学报(自然科学版),2014(01).

王安麟,石世宁.基于响应面法的中型挖掘机模型参数标定[J].机械设计,2013(07).

罗艳蕾,李渊,邱雪,白华,白玉珠.基于AMESim的挖掘机负荷传感多路阀建模和仿真[J].机床与液压,2012(03).

孙祖望,张义甫,郭德虎.推土机动态性能试验的非平稳随机数据模型和处理方法[J].工程机械,1988(10).

陈鸿彬.挖掘机液压系统压力载荷谱编制方法研究[D].吉林大学,2017(10).

辛益军主编.方差分析与实验设计[M].中国财政经济出版社,2002.

同济大学 主编.单斗液压挖掘机[M].中国建筑工业出版社,1986.