花少震,曹伟,张世勋,鲁贵祥,刘春太,申长雨.注塑成型喷射现象数值模拟及机理分析[J].应用力学学报,2016(04).

欧相麟,王大中,周起雄,关安南.注塑件喷射纹的形成机理及其解决措施[J].塑料工业,2012(05).

张世勋,曹伟,叶曙兵,李倩,申长雨.高速微注射成型中熔体充填模式及裹气机理研究[J].中国塑料,2012(01).

杜彬,安瑛,严志云,杨卫民,谢鹏程.矩形型腔熔体充填规律的可视化实验[J].塑料,2010(06).

严志云,谢鹏程,丁玉梅,杨卫民.基于可视化技术对注射成型喷射现象的研究[J].塑料,2010(03).

孙翔,杨卫民,丁玉梅,王兴天.基于可视化的注射成型制品缺陷及其产生机理的研究[J].中国塑料,2005(12).

M. Sardarian,O. Mirzaee,A. Habibolahzadeh.Numerical simulation and experimental investigation on jetting phenomenon in low pressure injection molding (LPIM) of alumina[J].Journal of Materials Processing Tech.,2016.

S.W. Chau ,,Y.W. Lin ,.Three-dimensional Simulation of Melt Filling and Gas Penetration in Gas-Assisted Injection Molding Process Using a Finite Volume Formulation[J].Journal of Polymer Engineering,2006.

Flow front advancement of molten thermoplastic materials during filling stage of a mold cavity[J].Polymer Testing,2004(8).

O. Ubbink,R.I. Issa.A Method for Capturing Sharp Fluid Interfaces on Arbitrary Meshes[J].Journal of Computational Physics,1999(1).

Krug,Evans,ter Maat.Jetting and weld lines in ceramic injection moulding[J].British Ceramic Transactions,1999(4).