Simulation Analysis of Current-Limiting and Recovery Characteristics for Resistive Superconducting Fault Current Limiters

ZHANG Qi; XIANG Bin; MA Shuxin; DENG Puda; YUAN Zhongbin; GENG Yinsan; LIU Zhiyuan; WANG Jianhua

doi:10.7652/xjtuxb202602015

您当前的位置：

首页 >

文章列表页 >

Simulation Analysis of Current-Limiting and Recovery Characteristics for Resistive Superconducting Fault Current Limiters

—————————————————————— | 更新时间：2026-02-09

- Simulation Analysis of Current-Limiting and Recovery Characteristics for Resistive Superconducting Fault Current Limiters
- Journal of Xi'an Jiaotong University Vol. 60, Issue 2, Pages: 156-165(2026)
- 作者机构：
  
  西安交通大学电工材料电气绝缘全国重点实验室，710049，西安
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb202602015
  CLC： TM725
- Received：25 May 2025，
  
  Published：10 February 2026
- 稿件说明：
移动端阅览
ZHANG Qi, XIANG Bin, MA Shuxin, et al. Simulation Analysis of Current-Limiting and Recovery Characteristics for Resistive Superconducting Fault Current Limiters[J]. Journal of Xi'an Jiaotong University, 2026, 60(2): 156-165.
DOI：

ZHANG Qi, XIANG Bin, MA Shuxin, et al. Simulation Analysis of Current-Limiting and Recovery Characteristics for Resistive Superconducting Fault Current Limiters[J]. Journal of Xi'an Jiaotong University, 2026, 60(2): 156-165. DOI： 10.7652/xjtuxb202602015.

摘要

为进一步探索超导限流器的恢复性能，准确判断其恢复状态，对电阻型超导限流器的限流电阻和恢复特性进行了仿真分析研究。基于实验获得的ST-12-L超导带材单位电阻-单位热量（

R-Q

）拟合曲线，以及超导的电场强度-电流密度指数（

E-J

）公式，结合液氮相变传热方程，在SIMULINK中建立了电阻型超导限流器的

R-Q

恢复模型和

E-J

恢复模型；仿真分析了

短路电流下ST-12-L超导带材的故障限流和恢复特性；基于

源和恢复测试回路，搭建了并联超导带材的限流和恢复实验电路，进行了

短路冲击下的超导带材的失超限流和恢复测试，并将实验结果和仿真结果进行了对比。对比发现：在限流效果仿真中，

E-J

恢复模型的电流正、负峰值与实验的最大误差分别为3.6%和15%，而

R-Q

恢复模型的电流正、负峰值与实验值的最大误差分别为2.3%和8.6%，

R-Q

恢复模型的限流仿真更为准确；在恢复时间仿真中，

R-Q

恢真模型的恢复时间最大误差仅为0.120 s，误差远小于

E-J

恢复模型的仿真结果。

R-Q

恢复仿真模型能有效模拟超导带材的失超和恢复，促进电阻型超导限流器在电力系统中的应用。

Abstract

To further investigate the recovery performance of superconducting fault current limiters and accurately determine their recovery state，a sim

ulation analysis was conducted on the current-limiting resistance and recovery characteristics of resistive superconducting fault current limiters（R-SFCLs）.Based on experimentally obtained per-unit resistance-Joule heat（

R-Q

）fitting curves for ST-12-L superconducting tapes and the electric field-current density（

E-J

）power-law relation for superconductors，combined with the heat transfer equation for liquid nitrogen phase change，both an

R-Q

recovery model and an

E-J

recovery model for R-SFCLs were established in SIMULINK.The fault current-limiting and recovery characteristics of ST-12-L superconducting tapes under

short-circuit conditions were simulated and analyzed.An experimental circuit for current limiting and recovery of parallel superconducting tapes was constructed based on an

power source and a recovery test loop.Quench current-limiting and recovery tests were performed on the superconducting tapes under

short-circuit impulses，and the experimental results were compared with the simulations.The comparison shows that in current-limiting simulation，the maximum errors of the positive and negative current peaks between the

E-J

recovery model and the experiment are 3.6% and 15%，respectively，while those for the

R-Q

recovery model are 2.3% and 8.6%，indicating that the

R-Q

model provides more accurate current-limiting simulation.In recovery time simulation，the maximum error of the

R-Q

recovery model is only 0.120 s，which is significantly smaller than that of the

E-J

recovery model.The

R-Q

recovery model can effectively simulate the quench and recovery process of superconducting tapes and promote the application of resistive superconducting fault current limiters in power systems.

关键词

Keywords

references

CHANG B, CWIKOWSKI O, BARNES M, et al. Multi-terminal VSC-HVDC pole-to-pole fault analysis and fault recovery study[C]//11th IET International Conference on AC and DC Power Transmission.Piscataway, NJ, USA:IEEE, 2015:1-8.

信赢.超导限流器综述[J].南方电网技术, 2015, 9 (3):1-9.

XIN Ying.Review on superconducting fault current limiters[J].Southern Power System Technology, 2015, 9(3):1-9.

YANG Kun, ZHANG Licai, TAN Yaxiong, et al. Design of a pancake-type superconducting tape winding according to heat diffusion ability[J]. IEEE Transactions on Applied Superconductivity, 2016, 26 (7):1-5 .

刘应杰,周羽生,周文晴,等.电阻型超导限流器中带材失超与恢复特性[J].低温与超导, 2023, 51(3):7-13.

LIU Yingjie, ZHOU Yusheng, ZHOU Wenqing, et al. Quench and recovery characteristics of tapes in resistive type superconducting fault current limiter[J]. Cryogenics and Superconductivity, 2023, 51 (3 ):7-13.

CHEN Xiaoyuan, ZHANG Mingshun, CHEN Yu, et al.Superconducting fault current limiter (SFCL)for fail-safe DC-DC conversion:from power electronic device to micro grid protection[J].Superconductivity, 2022, 1 :100003.

XIANG Bin, YANG Kun, TAN Yaxiong, et al.DC-current-limiting characteristics of YBCO tapes for DC currents of 50 A to 10 kA[J].IEEE Transactions on Applied Superconductivity, 2017, 27(4):1-5.

倪辉,黎炜,兰润栋,等.超导故障限流器抑制短路电流直流分量的仿真分析[J].电工电能新技术, 2021 , 40(10):74-80.

NI Hui, LI Wei, LAN Rundong, et al.Simulation analysis of superconducting fault current limiter to suppress DC component of short circuit current[J].Advanced Technology of Electrical Engineering and Energy, 2021 , 40(10):74-80.

SONG Meng, DAI Shaotao, SHENG Chao, et al.De sign and tests of a 160-kV/1-kA DC superconducting fault current limiter[J].IEEE Transactions on Applied Superconductivity, 2021, 31(6):1-7.

GUO Peiqian, YUAN Zhichang, MA Tao, et al. Study of 160 kV/1 kA R-SFCL design and application in nanao MMC-MTDC proj ect[J].IEEE Transactions on Applied Superconductivity, 2022, 32(2):1-11.

MA Tao, DAI Shaotao, SONG Meng, et al.Design aspects of transmission voltage superconducting fault current limiters with YBCO tapes in China[J].Superconductivity, 2022, 4:100029 .

MOYZYKH M, GORBUNOVA D, USTYUZHANIN P, et al.First Russian 220 kV superconducting fault current limiter (SFCL)for application in city grid[J]. IEEE Transactions on Applied Superconductivity, 2021, 31(5):1-7.

DAI Shaotao, MA Tao, XUE Chi, et al.Development and test of a 220 kV/1.5 kA resistive type superconducting fault current limiter[J].Physica:C Superconductivity and Its Applications, 2019, 565:1253501.

ZHANG Jingye, TENG Yuping, QIU Qingquan, et al.Design and development of a 220-kV resistive-type fault current limiters based on 2 G-coated conductors[J].Journal of Superconductivity and Novel Magnetism, 2019, 32(12):3779-3787.

JIANG Zhe, WANG Yinshun, DAI Shaotao, et al. Application and design of resistive SFCL in±160 kV MMC-HVdc system[J].IEEE Transactions on Applied Superconductivity, 2019, 29(5):1-5.

SONG Meng, DAI Shaotao, SHENG Chao, et al.Design and performance tests of a 160 kV/1.0 kA DC superconducting fault current limiter[J].Physica:C Superconductivity and Its Applications, 2021, 585:1353871 .

XIANG Bin, TANG Zhengquan, ZHANG Qi, et al. Current-limiting and recovery characteristics of resistive-type superconducting fault current limiters during quench-recovery-requench process[J].IEEE Transactions on Applied Superconductivity, 2023, 33 (9 ):1-11.

ROY F Ç, DUTOIT B, GRILLI F, et al.Magnetothermal modeling of second-generation HTS for resistive fault current limiter design purposes[J].IEEE Transactions on Applied Superconductivity, 2008, 18 (1):29-35 .

ZHANG Min, MATSUDA K, COOMBS T A.New application of temperature-dependent modelling of high temperature superconductors:quench propagation and pulse magnetization[J].Journal of Applied Physics, 2012, 112(4):043912.

张振宇,程诺,罗翔,等.10 kV配电网高温超导电缆电热耦合模型仿真分析[J].高压电器, 2020, 56 (11):203-209.

ZHANG Zhenyu, CHENG Nuo, LUO Xiang, et al. Electrical-thermal coupling model analysis of high temperature superconducting power cable utilized in 10 kV power distribution system[J].High Voltage Apparatus, 2020, 56(11):203-209.

罗书山.高温超导带材直流冲击及恢复特性与能量耗散研究[D].重庆:重庆大学, 2020.

牛梦蝶.多场耦合作用下高温超导线圈的电磁及力学特性研究[D].兰州:兰州大学, 2022.

XU Ying, YANG Zili, FENG Tangyao, et al.Analysis of overcurrent performance of YBCO tape considering different heat exchange conductions[J]. IEEE Transactions on Applied Superconductivity, 2021, 31 (5):1-5 .

TAN Yaxiong, YANG Kun, XIANG Bin, et al.Heat generation and temperature rise in a resistive type superconducting fault current limiter[C]//2015 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD).Piscataway, NJ, USA:IEEE, 2015:286-287.

XIANG Bin, JUNAID M, GAO Lei, et al.Effects of short circuit currents on quench and recovery properties of YBCO tapes for DC SFCL[J].IEEE Transactions on Applied Superconductivity, 2019, 29 (2 ):1-6.

XIANG Bin, WANG Wenqing, LI Hongxu, et al. Study on the influencing factors to reduce the recovery time of superconducting tapes and coils for the DC superconducting fault current limiter applications[J]. High Voltage, 2022, 7(3):483-495.

管广域,丁开忠,董育军,等.电力故障运行下磁偏置超导限流器超导限流单元的电-热特性分析与验证[J].低温物理学报, 2020, 42(4):185-191.

GUAN Guangyu, DING Kaizhong, DONG Yujun, et al.Analysis and verification of electro-thermal characteristics of magnetic bias superconducting current limiter superconducting current limit unit under power failure operation[J].Low Temperature Physical Letters, 2020, 42(4):185-191.

刘路昕,张京业,滕玉平,等.限流器用第二代超导带材大电流冲击过程的物理模型研究[J].电工电能新技术, 2017, 36(10):76-80.

LIU Luxin, ZHANG Jingye, TENG Yuping, et al. Study of physical model of resistive superconducting fault current limiter under AC over-current[J].Advanced Technology of Electrical Engineering and Energy, 2017, 36(10):76-80.

TAN Xiangyu, REN Li, LIANG Siyuan, et al.Analysis of R-SFCL with shunt resistor in MMC-HVDC system using novel R-Q method[J ] .IEEE Transactions on Applied Superconductivity, 2020, 30 (4 ):1-5 .

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Turbulent Kinetic Energy Dissipation Mechanism of Supercritical Carbon Dioxide Leakage Flow in a Scallop Bionic Seal Cavity

Research on the Electrohydrodynamic Effects of Ionic Liquid-Modified Fuels

Diffusion Characteristics and Influencing Factors in Case of Hydrogen Leakage from Fuel Cell Vehicles Running in Tunnels

Effects of Expansion Angle Crater Film Hole on the Film Cooling Characteristics of a Double-Wall Structure

I/O Performance Modeling and Prediction Method for Large-Scale Parallel Applications Using Machine Learning

Related Author

No data

Related Institution

No data

⁰