Optimization of Electrolytic Copper Foil Manufacturing ProcessParameters by Integrating Equipment Status and Product Requirements

JIANG Hongquan; HUANG Kaicheng; ZHOU Zhi; MIAO Dong; CHEN Fumin; GAO Jianmin; YANG Xiangkui; ZHU Yigang

doi:10.7652/xjtuxb202407017

您当前的位置：

首页 >

文章列表页 >

Optimization of Electrolytic Copper Foil Manufacturing ProcessParameters by Integrating Equipment Status and Product Requirements

更新时间：2025-07-28

- Optimization of Electrolytic Copper Foil Manufacturing ProcessParameters by Integrating Equipment Status and Product Requirements
- Vol. 58, Issue 7, Pages: 179-190(2024)
- 作者机构：
  
  1. 西安交通大学机械制造系统工程国家重点实验室,西安,710049
  2. 西安泰金新能科技股份有限公司,西安,710001
  3. 山东金宝电子有限公司, 265400, 山东招远
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb202407017
  CLC： TN41;TP391
- Online First：10 July 2024，
  
  Published：2024
- 稿件说明：
移动端阅览
JIANG Hongquan, HUANG Kaicheng, ZHOU Zhi, et al. Optimization of Electrolytic Copper Foil Manufacturing ProcessParameters by Integrating Equipment Status and Product Requirements[J]. 2024, 58(7): 179-190.
DOI：

JIANG Hongquan, HUANG Kaicheng, ZHOU Zhi, et al. Optimization of Electrolytic Copper Foil Manufacturing ProcessParameters by Integrating Equipment Status and Product Requirements[J]. 2024, 58(7): 179-190. DOI： 10.7652/xjtuxb202407017.

摘要

针对当前电解铜箔制造工艺参数的优化仅考虑产品要求的问题

提出了一种融合设备状态和产品要求的电解铜箔制造工艺参数优化方法。首先

为辨识铜箔制造中工艺、设备与产品参数之间的非线性关系

建立了基于神经网络的“工艺-设备”与产品参数的映射模型

并通过构建当前生产模式与历史生产模式的相似性度量方法

确定当前工艺参数的优化初始点; 然后

基于所建立的映射模型、设备状态和产品要求构建多目标约束函数

并利用遗传算法优化工艺参数

获得同时满足设备状态和产品要求的最佳工艺参数。企业的生产验证表明:相较于仅考虑产品要求的工艺优化方法

所提方法优化后的工艺参数能在相同的设备状态下获得质量更好的产品

在常温/高温抗拉强度、常温/高温延伸率和树脂剥离强度这5项关键指标上

分别提升了6.1 MPa、6.1 MPa、1.9%、0.7%和0.22 N/mm

生箔制备和表面处理的生产效率也提高了2.65%和7.5%

能够有效保证并提高铜箔的质量和生产效益。

Abstract

Aiming at the problem that the current optimization methods of electrolytic copper foil manufacturing process parameters simply consider product requirements

an optimization method of electrolytic copper foil manufacturing process parameters by integrating equipment status and product requirements is proposed. Firstly

in order to identify the nonlinear relationship among process

equipment

and product parameters in the copper foil manufacturing

a mapping model of “process-equipment” and product parameters is established based on neural network. By constructing the similarity measurement method between the current production mode and the historical production mode

the optimization starting point of the current process parameters is determined. Furthermore

based on the established mapping model

equipment status

and product requirements

a multi-objective constraints function is constructed

and genetic algorithm is used to optimize the process parameters

aiming to achieve the optimal process parameters that meet both equipment status and product requirements. Through the verification in the production of enterprises

it is shown that

compared with the process optimization method that only considers product requirements

the optimized process parameters can yield products with higher quality under the same equipment status

increasing the five key indicators of normal temperature and high temperature tensile strength

normal temperature and high temperature elongation

and resin peeling strength by 6.1 MPa

6.1 MPa

1.9%

0.7%

and 0.22 N/mm respectively. Additionally

the production efficiency of raw foil preparation and surface treatment increase by 2.65% and 7.5% respectively. The research results can effectively ensure and improve the quality and production efficiency of copper foil.

关键词

Keywords

references

祝大同. 高频高速PCB用铜箔技术与品种的新发展 [J]. 印制电路资讯, 2019(1): 68-75.

ZHU Datong. New development of copper foil technology and varieties for high frequency and high speed PCB [J]. Printed Circuit Board Information,2019(1): 68-75.

张惠源. 锂电铜箔发展现状及市场的研究 [J]. 环渤海经济瞭望, 2018(11): 49.

ZHANG Huiyuan. Research on the development status and market of lithium copper foil [J]. Economic Outlook the Bohai Sea, 2018(11): 49.

金荣涛. 电解铜箔生产 [M]. 长沙: 中南大学出版社, 2010.

JURAN J M, DE FEO J A. 朱兰质量手册 [M]. 焦叔斌, 苏强, 杨坤, 等, 译. 6版. 北京: 中国人民大学出版社, 2014.

杨祥魁, 刘建广, 徐树民, 等. 铜箔制程对CCL及PCB要求的应对 [J]. 印制电路信息, 2012(1): 9-14.

YANG Xiangkui, LIU Jianguang, XU Shumin, et al. Production process of copper foils to meet requirements of CCL and PCB [J]. Printed Circuit Information, 2012(1): 9-14.

马逢时, 周暐, 刘传冰. 六西格玛管理统计指南 [M]. 3版. 北京: 中国人民大学出版社, 2018.

凌羽, 张少强, 卢伟伟, 等. 低轮廓电解铜箔制备工艺参数的优化 [J]. 电镀与涂饰, 2023, 42(20): 11-20.

LING Yu, ZHANG Shaoqiang, LU Weiwei, et al. Optimization of process parameters for preparation of low-profile electrolytic copper foil [J]. Electroplating Finishing, 2023, 42(20): 11-20.

樊斌锋, 王绪军, 王庆福, 等. 添加剂对极薄锂电铜箔电沉积过程的影响 [J]. 电镀与精饰, 2023, 45(5): 85-89.

FAN Binfeng, WANG Xujun, WANG Qingfu, et al. Effect of additives on electrodeposition of very thin lithium copper foil [J]. Plating Finishing, 2023, 45(5): 85-89.

彭雪嵩, 由宏伟, 李兰晨, 等. 钼酸钠-HEC-SPS复合添加剂对电解铜箔粗化效果的影响 [J]. 电镀与涂饰, 2023, 42(17): 56-67.

PENG Xuesong, YOU Hongwei, LI Lanchen, et al. Effect of a composite additive comprising sodium molybdate, HEC,and SPS on roughening of electrolytic copper foil [J]. Electroplating Finishing, 2023, 42(17): 56-67.

由宏伟. 高性能电解铜箔的表面处理工艺研究 [D]. 哈尔滨: 哈尔滨工业大学, 2022.

文雯. 高频超薄载体铜箔制作及应用研究 [D]. 成都: 电子科技大学, 2022.

LI Yanfeng, HUANG Guojie, YIN Xiangqian, et al. Effect of copper ion concentration on microstructure and mechanical properties of electrolytic copper foil [J]. IOP Conference Series: Materials Science and Engineering, 2018, 381(1): 012166.

LIU Lingling, BU Yeqiang, SUN Yue, et al. Trace bis-(3-sulfopropyl)-disulfide enhanced electrodeposited copper foils [J]. Journal of Materials Science Technology, 2021, 74: 237-245.

YANG Lei, WENG Wei, ZHU Huanlin, et al. Preparing ultra-thin copper foil as current collector for improving the LIBs performances with reduced carbon footprint [J]. Materials Today Communications, 2023, 35: 105952.

易光斌. 电解铜箔组织性能及其翘曲产生机理研究 [D]. 南昌: 南昌大学, 2014.

刘耀. 极薄载体铜箔制备及高抗剥离表面处理技术研究 [D]. 赣州: 江西理工大学, 2021.

周杰, 顾伟伟, 张建, 等. 基于随机森林和改进竞争群算法的铜电解过程能耗优化 [J]. 中国有色冶金, 2023, 52(1): 60-67.

ZHOU Jie, GU Weiwei, ZHANG Jian, et al. Energy consumption optimization of copper electrolysis process based on random forest and improved competitive group algorithm [J]. China Nonferrous Metallurgy, 2023, 52(1): 60-67.

PLATHOTTAM S J, RICHEY B, CURRY G, et al. Solvent extraction process design using deep reinforcement learning [J]. Journal of Advanced Manufacturing and Processing, 2021, 3(2): e10079.

刘孝保, 严清秀, 易斌, 等. 基于集成学习和改进粒子群优化算法的流程制造工艺参数优化 [J]. 中国机械工程, 2023, 34(23): 2842-2853.

LIU Xiaobao, YAN Qingxiu, YI Bin, et al. Optimization of process parameters in process manufacturing based on ensemble learning and improved particle swarm optimization algorithm [J]. China Mechanical Engineering, 2023, 34(23): 2842-2853.

ABDULLAH S, PRADHAN R C, PRADHAN D, et al. Modeling and optimization of pectinase-assisted low-temperature extraction of cashew apple juice using artificial neural network coupled with genetic algorithm [J]. Food Chemistry, 2021, 339: 127862.

杨森. 锂电池用高性能超薄电解铜箔的研究 [D]. 常州: 常州大学, 2022.

HONDA M, MAENISHIHARA O, SHIBUYA Y. Method of manufacturing copper foil with carrier, laminate, method of manufacturing printed wiring board and method of manufacturing electronic device: JP 6546836B2 [P]. 2019-07-17.

NAKAJIMA D, HANADA T, YOSHIKAWA K, et al. Ultra-thin copper foil with carrier, method for producing the same, copper-clad laminate and printed wiring board: JP 6650923B2 [P]. 2020-02-19.

梁超, 张熊, 米高阳, 等. 基于神经网络与遗传算法的铝合金激光摆动焊工艺参数优化 [J]. 电焊机, 2022, 52(8): 43-49.

LIANG Chao, ZHANG Xiong, MI Gaoyang, et al. Optimal design for laser oscillating welding process parameter based on artificial neural networks and genetic algorithm for aluminum alloy [J]. Electric Welding Machine, 2022, 52(8):43-49.

姜洪权, 王岗, 高建民, 等. 一种适用于高维非线性特征数据的聚类算法及应用 [J]. 西安交通大学学报, 2017, 51(12): 49-55.

JIANG Hongquan, WANG Gang, GAO Jianmin, et al. A clustering algorithm for high-dimensional nonlinear feature data with applications [J]. Journal of Xi'an Jiaotong University, 2017, 51(12): 49-55.

王晓阳, 张洪渊, 沈良忠, 等. 基于相似性度量的高维数据聚类算法研究 [J]. 计算机技术与发展, 2013, 23(5): 30-33.

WANG Xiaoyang, ZHANG Hongyuan, SHEN Liangzhong, et al. Research on high dimensional clustering algorithm based on similarity measurement [J]. Computer Technology and Development, 2013, 23(5): 30-33.

雷英杰, 张善文. MATLAB遗传算法工具箱及应用 [M]. 2版. 西安: 西安电子科技大学出版社, 2014.

黄明华, 刘广新, 何雅玲, 等. 基于遗传算法的太阳能烟囱发电站结构优化 [J]. 西安交通大学学报, 2021, 55(10): 1-10.

HUANG Minghua, LIU Guangxin, HE Yaling, et al. Structural optimization of solar chimney power plant by a genetic algorithm [J]. Journal of Xi'an Jiaotong University, 2021, 55(10): 1-10.

周志华. 机器学习 [M]. 北京: 清华大学出版社, 2016.

陶洋, 祝小钧, 杨柳. 基于皮尔逊相关系数和信息熵的多传感器数据融合 [J]. 小型微型计算机系统, 2023, 44(5): 1075-1080.

TAO Yang, ZHU Xiaojun, YANG Liu. Multi-sensor data fusion based on Pearson coefficient and information entropy [J]. Journal of Chinese Computer Systems, 2023, 44(5): 1075-1080.

国家市场监督管理总局, 国家标准化管理委员会. 印制板用电解铜箔: GB/T 5230—2020 [S]. 北京: 中国标准出版社, 2020.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Prediction of Machining Error for Machine Tool Multi-Body System Restrained by Stiffness Field

A Structure-Semantics-Residual Collaborative Image Compression Framework：Towards Privacy Protection and High-Fidelity Reconstruction

Numerical Simulation of Heat-Moisture Barrier Performance of a Horizontal Air Curtain in Cold Storage

Diffusion Characteristics and Influencing Factors in Case of Hydrogen Leakage from Fuel Cell Vehicles Running in Tunnels

A Fast Calculation Method for Thermal Flow Fields in Transformer Windings Based on PI-DeepONet

Related Author

高羡明 1

洪军 1

甄宜超 2

Related Institution

State Key Laboratory for Manufacturing System Engineering, Xi'an Jiao tong University

⁰