In order to reduce the fluctuation of motor load torque of two-stage single screw compressor
based on the mechanical characteristics of the single screw compressor
a mechanical model of the two-stage tandem screw rotor is established and the fluctuation characteristics of its gas resistance torque is studied. The torque fluctuation ratio of the two-stage tandem single screw compressor with air mass flow rate of 40.6 kg/m
3
under different exhaust pressure is calculated and analyzed
and then compared with that of any single screw compressor running independently. The results show that for a single screw compressor with a fixed mass flow rate
there exists a definite pressure ratio
which leads to the smallest
gas resistance torque fluctuation ratio. The two-stage single-screw compressor with tandem operation is more stable than that with the parallel operation. Moreover
in the two-stage tandem single screw compressor
the fluctuation amplitude of the total gas resistance torque is significantly influenced by the initial phase difference between the first and second screw rotor
and there always exists the minimum value caused by an optimal initial phase difference. The above research results have certain guiding significance for the design and further development of two-stage single screw compressor.
YU Zhiqiang, YU Yang, LIN Ziliang, et al. Domestic screw compressor energy-saving development direction [J]. General Machinery, 2013(2): 23-25.
WANG Zengli, SHI Houwei, WANG Shuyu, et al. Study on the operating characteristic of disc seal single screw pump used in energy recovery systems [J]. International Journal of Refrigeration, 2020, 118: 336-344.
HUANG Rui, LI Ting, YU Xiaoling, et al. An optimization of the star-wheel profile in a single screw compressor [J]. Proceedings of the Institution of Mechanical Engineers: Part A Journal of Power and Energy, 2014, 229(2): 139-150.
ZIVIANI D, BELL I H, ZHANG Xinye, et al. PDSim: demonstrating the capabilities of an open-source simulation framework for positive displacement compressors and expanders [J]. International Journal of Refrigeration, 2020, 110: 323-339.
王仁德. 单螺杆压缩机发展简况 [J]. 机电设备, 1994(1): 18-28.
WANG Rende. Single screw compressor development brief [J]. Mechanical and Electrical Equipment, 1994(1): 18-28.
WU Jianhua, JIN Guangxi, FENG Junhong. Study of the star rotor hob of a single screw compressor using a conical surface two-envelope engagement pair [J]. Journal of Xi'an Jiaotong University, 1996, 30(5): 44-49.
CHEN Jinding, YANG Shuqiao, GAO Yanxiang. Research and development of PET aseptic filling technology and equipment of beverage [J]. Food Machinery, 2021, 37(5): 215-220.
吕超. PET瓶吹塑工艺及瓶坯结构参数的优化研究 [D]. 杭州: 浙江大学, 2014.
ZIVIANI D, GUSEV S, LECOMPTE S, et al. Characterizing the performance of a single-screw expander in a small-scale organic Rankine cycle for waste heat recovery [J]. Applied Energy, 2016, 181: 155-170.
LIANG Zheng, SHEN Jiang, WEI Guodong, et al. Study on the performance of water vapor heat pump system with water spray cooling screw compressor [J]. Journal of Engineering for Thermal Energy and Power, 2021, 36(5): 82-89.
ZHOU Lei, JIN Guangxi. Dynamic characteristics of gate rotor for single screw compressor [J]. Journal of Xi'an Jiaotong University, 1998, 32(11): 60-64.
PENG Chengyu, ZHANG Zhao, XIE Jia, et al. Dynamic analysis of the asynchronous compression cycle for the rotor in single screw compressor [J]. Journal of Xi'an Jiaotong University, 2021, 55(1): 136-144.
LUKANISZYN M, JAGIELA M, WROBEL R. Optimization of permanent magnet shape for minimum cogging torque using a genetic algorithm [J]. IEEE Transactions on Magnetics, 2004, 40(2): 1228-1231.
FERRER-VIDAL L E, IGLESIAS-PÉREZ A, PACHIDIS V. Characterization of axial compressor performance at locked rotor and torque-free windmill conditions [J]. Aerospace Science and Technology, 2020, 101: 105846.
HUO Junya. Discussion and analysis of direct torque control system for permanent magnet synchronous motor [J]. Electrical Appliances, 2012(7): 33-37.
THAMIZHAZHAGAN P, SUTHA S. Adaptive vector control reference strategy based speed and torque control of permanent magnet synchronous motor [J]. Microprocessors and Microsystems, 2020, 74: 103007.
CHEN Chao, ZHANG Guijun, LIU Wenli. Analysis of the effect of stepless air volume adjustment system on the torque of reciprocating compressor [J]. Petrochemical Equipment Technology, 2019, 40(2): 20-22.
WANG Zengli, FENG Quanke. Affect of geometry parameters on performance of single screw compressor [J]. Fluid Machinery, 2014, 42(11): 34-37, 78.
WANG Wei, QIAO Han, LEI Biao, et al. Experimental study on the influence of inlet and exhaust pressure loss on the performance of single screw expanders [J]. Energy, 2021, 232: 120912.
ZHI Ruiping, WU Yuting, WANG Wei, et al. Main geometric analysis of PC-type single-screw compressor [J]. Journal of Beijing University of Technology, 2017, 43(10): 1545-1553.