Lubrication of Biomimetic Tree-Like Bifurcation Networks on Artificial Joint Materials

doi:10.7652/xjtuxb202202007

您当前的位置：

首页 >

文章列表页 >

Lubrication of Biomimetic Tree-Like Bifurcation Networks on Artificial Joint Materials

更新时间：2025-05-08

- Lubrication of Biomimetic Tree-Like Bifurcation Networks on Artificial Joint Materials
- Vol. 56, Issue 2, Pages: 66-73(2022)
- 作者机构：
  
  西安交通大学现代设计及转子轴承系统教育部重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb202202007
  CLC： TH117
- Online First：10 February 2022，
  
  Published：2022
- 稿件说明：
移动端阅览
Lubrication of Biomimetic Tree-Like Bifurcation Networks on Artificial Joint Materials[J]. 2022, 56(2): 66-73.
DOI：

Lubrication of Biomimetic Tree-Like Bifurcation Networks on Artificial Joint Materials[J]. 2022, 56(2): 66-73. DOI： 10.7652/xjtuxb202202007.

摘要

为提高人工关节假体材料(钛合金/超高分子量聚乙烯配副)的耐磨性

研究了材料仿生树状分叉网络织构的液体铺展流动性能与摩擦学性能。根据分支数与分支角不同

分别设计了3类仿生树状分叉网络织构(十字型网络、T型网络、Y型网络)

每类树状网络织构分别制备成织构率为10%、15%、20%的3种试样。通过试验

评价了树状网络的液体铺展流动性和摩擦学性能

结果发现:3种织构表面均可以降低瞬时接触角和实现液体完全铺展

并具有较好的减摩性能; Y型网络织构具有最好的液体铺展流动性能

2 μL的液体在10%织构率时瞬时接触角为23.37°

仅0.95 s可以完全铺展; T型网络织构在15%织构率时摩擦系数仅为0.077

较原始表面降低了38%。研究内容对人工关节自润滑减摩设计具有重要参考意义。

Abstract

To ensure and lengthen the service life of artificial joint(titanium alloy/ultra high molecular weight polyethylene)

the liquid spreading flow properties and tribological properties of biomimetic tree-like networks texture are investigated. Three kinds of surface textures with different branch numbers and branch angles(cross-shaped network

T-shaped network

Y-shaped network)are designed. Each kind of tree-like networks texture is prepared in texture ratios of 10%

15%

20%respectively. The liquid spreading fluidity and tribological properties of biomimetic tree-like networks are evaluated by the experiments. All the three kinds of textured surfaces are able to reduce the instantaneous contact angle and realize the liquid spreading completely within a certain period and are endowed with good antifriction properties. The Y-shaped network texture has the best liquid spreading flow property

whose instantaneous contact angle of 2 μL liquid in 10%texture ratio is 23.37°

and the liquid can fully spread in 0.95 seconds. The friction coefficient of T-shaped network texture gets only 0.077 in 15%texture ratio

which lowers by 38%compared with the original surface. This approach is beneficial to self-lubricating friction reduction design of artificial joint.

关键词

Keywords

references

KURTZ S M. UHMWPE biomaterials handbook: ultra-high molecular weight polyethylene in total joint replacement and medical devices [M]. 3rd ed. Amsterdam: William Andrew Publishing, 2015: 16.

洪如辰, 任瑛, 李龙飞, 等. 人工关节材料摩擦性能研究进展 [J]. 功能材料与器件学报, 2021, 27(1): 46-53.

HONG Ruchen, REN Ying, LI Longfei, et al. Research progress on tribological properties of artificial joint materials [J]. Journal of Functional Materials and Devices, 2021, 27(1): 46-53.

周驰, 何伟, 刘予豪, 等. 第4代全陶瓷全髋关节置换后陶瓷部件碎裂的因素分析 [J]. 中国组织工程研究, 2018, 22(35): 5577-5582.

ZHOU Chi, HE Wei, LIU Yuhao, et al. Factors related to the fragmentation of ceramic components after fourth-generation ceramic-on-ceramic total hip arthroplasty [J]. Chinese Journal of Tissue Engineering Research, 2018, 22(35): 5577-5582.

CHETHAN K N, SATISH SHENOY B, SHYAMASUNDER BHAT N. Role of different orthopedic biomaterials on wear of hip joint prosthesis: a review [J]. Materials Today: Proceedings, 2018, 5(10): 20827-20836.

KHANNA R, ONG J L, ORAL E, et al. Progress in wear resistant materials for total hip arthroplasty [J]. Coatings, 2017, 7(7): 99.

CUI X H, MAO Y S, WEI M X, et al. Wear characteristics of Ti-6Al-4V alloy at 20—400 ℃ [J]. Tribology Transactions, 2012, 55(2): 185-190.

STANAT S J C, CAPOZZI J D. Squeaking in third-and fourth-generation ceramic-on-ceramic total hip arthroplasty: meta-analysis and systematic review [J]. The Journal of Arthroplasty, 2012, 27(3): 445-453.

郭飞飞, 任明基, 胥光申, 等. 人工关节材料的表面润滑设计与应用 [J]. 润滑与密封, 2019, 44(12): 130-136.

GUO Feifei, REN Mingji, XU Guangshen, et al. Surface lubrication design and application of artificial joint material [J]. Lubrication Engineering, 2019, 44(12): 130-136.

李月, 郭俊德, 王伟, 等. PCEC水凝胶缓释BSA/CS的润滑性能 [J]. 中国表面工程, 2017, 30(5): 74-80.

LI Yue, GUO Junde, WANG Wei, et al. Lubricating performance of PCEC hydrogel sustained release BSA/CS [J]. China Surface Engineering, 2017, 30(5): 74-80.

BORJALI A, LANGHORN J, MONSON K, et al. Using a patterned microtexture to reduce polyethylene wear in metal-on-polyethylene prosthetic bearing couples [J]. Wear, 2017, 392/393: 77-83.

张辉, 刘洋, 王伟, 等. 织构化表面设计及其摩擦学应用 [J]. 机械工程学报, 2019, 55(17): 85-93.

ZHANG Hui, LIU Yang, WANG Wei, et al. Surface texture design and its tribological application [J]. Journal of Mechanical Engineering, 2019, 55(17): 85-93.

张玉周. 表面织构化改善摩擦学性能研究综述 [J]. 成都大学学报(自然科学版), 2013, 32(1): 64-67, 70.

ZHANG Yuzhou. Review of research on surface texturing for improving tribological performance [J]. Journal of Chengdu University(Natural Science), 2013, 32(1): 64-67, 70.

秦立果, 杨浩, 刘斌, 等. 织构化表面改性及其在生物材料上的应用 [J]. 表面技术, 2018, 47(9): 1-11.

QIN Liguo, YANG Hao, LIU Bin, et al. Surface texturing modification and its effect on biomaterials [J]. Surface Technology, 2018, 47(9): 1-11.

CHYR A, QIU Mingfeng, SPELTZ J W, et al. A patterned microtexture to reduce friction and increase longevity of prosthetic hip joints [J]. Wear, 2014, 315(1/2): 51-57.

CHOUDHURY D, REBENDA D, SASAKI S, et al. Enhanced lubricant film formation through micro-dimpled hard-on-hard artificial hip joint: an in-situ observation of dimple shape effects [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 81: 120-129.

SUN Taolei, FENG Lin, GAO Xuefeng, et al. Bioinspired surfaces with special wettability [J]. Accounts of Chemical Research, 2005, 38(8): 644-652.

XU Peng, SASMITO A P, YU Boming, et al. Transport phenomena and properties in treelike networks [J]. Applied Mechanics Reviews, 2016, 68(4): 040802.

PATEL D S, SINGH A, BALANI K, et al. Topographical effects of laser surface texturing on various time-dependent wetting regimes in Ti6Al4V [J]. Surface and Coatings Technology, 2018, 349: 816-829.

刘奇, 董光能. 纳秒脉冲激光参数及激光路径填充方式对表面织构平坦化的影响 [J]. 表面技术, 2019, 48(8): 23-28, 47.

LIU Qi, DONG Guangneng. Effect of nanosecond pulsed laser parameters and texture machining methods on surface texture flattening [J]. Surface Technology, 2019, 48(8): 23-28, 47.

WENZEL R N. Surface roughness and contact angle [J]. The Journal of Physical and Colloid Chemistry, 1949, 53(9): 1466-1467.

徐鹏. 树状分形分叉网络的输运特性 [D]. 武汉: 华中科技大学, 2008: 32-39.

邢海婷. 特殊润湿性铜表面的微纳结构构建与流体流动 [D]. 广州: 华南理工大学, 2020: 35-42.

ROY T, CHOUDHURY D, BIN MAMAT A, et al. Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling [J]. Ceramics International, 2014, 40(1, Part B): 2381-2388.

汪家道, 陈大融, 孔宪梅. 规则凹坑表面形貌润滑研究 [J]. 摩擦学学报, 2003, 23(1): 52-55.

WANG Jiadao, CHEN Darong, KONG Xianmei. Study on lubrication of regular concave surface [J]. Tribology, 2003, 23(1): 52-55.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical Simulation of Wrinkling in Multi-Point Forming Process of Titanium Alloy Retiary Sheet

An Improved Constitutive Model and Finite Element Simulation for Machining Ti-6Al-4V Alloy

Ablation Characteristics and Interaction Mechanism of Ultra-Fast Pulse Laser-Induced Damage in Titanium Alloy

Tribological Properties of the Lubricant Released by Temperature-Sensitive Hydrogel

Quick Calculation Method and Contact Angle Analysis for High-Speed Angular Contact Ball Bearing under Combined Loads

Related Author

孙刚

蔡中义

李明哲

谭富星

武文革 2

吕明 1

刘丽娟 1

Related Institution

Dieless Forming Technology Center, Jilin University

College of Mechanical Engineering, Taiyuan University of Technology

College of Mechanical Engineering and Automatization, North University of China

School of Mechanical Engineering, Xi'an Jiaotong University

State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University

⁰