Influence of Injection Strategy on Combustion and Emissions of Multi-point Injection Natural Gas Engine[J]. 2022, 56(2): 57-65.
DOI:
Influence of Injection Strategy on Combustion and Emissions of Multi-point Injection Natural Gas Engine[J]. 2022, 56(2): 57-65.DOI: 10.7652/xjtuxb202202006.
Influence of Injection Strategy on Combustion and Emissions of Multi-point Injection Natural Gas Engine
In order to improve the flame propagation velocity and combustion efficiency of large cylinder diameter marine multi-point jet rarefied combustion natural gas engine under medium and low load
and then optimize engine combustion and emissions
the influences of injection direction and position
injection pressure and injection time on engine combustion and emission are studied by bench test and simulation. The results show that the air injection direction perpendicular to the incoming air can enhance the disturbance effect
the air injection position far from the valve can increase the distance of the gas injection flow in the inlet
increase the uniformity of the mixing of the intake
thick mixture is distributed near the spark plug
and the combustion and emission are obviously improved. When the injection pressure is 736.63 kPa
the injection kinetic energy can be increased to improve turbulence intensity in cylinder and the mixing uniformity of the intake air. At the same time
it can adapt to the large-scale mixing in the cylinder
and the combustion and emission are better. With the delay of the injection timing
the mixture in the cylinder formed obvious stratification phenomenon during ignition
and the mixture concentration gradually decreases from top to bottom. The thick mixture near the spark plug is conducive to the development of the fire core
the flame propagation speed is accelerated
and the combustion efficiency of the gas is improved. It provides a theoretical basis for realizing efficient clean combustion of marine natural gas engine with large cylinder diameter.
关键词
Keywords
references
ERKUSB, SÜRMEN A, KARAMANGIL M(•overI). A comparative study of carburation and injection fuel supply methods in an LPG-fuelled SI engine [J]. Fuel, 2013, 107: 511-517.
MA Fanhua, Wang Yu. Study on the extension of lean operation limit through hydrogen enrichment in a natural gas spark-ignition engine [J]. International Journal of Hydrogen Energy, 2008, 33(4): 1416-1424.
TAKASAKI K. Observations on the development and practical application of marine gas engines [J]. Classnk Technical Bulletin, 2012, 30: 1-9.
TAKASU K, KINOSHITA H, KATO R. Effects on fuel economy and NOx emission using stratified charge and EGR system for a single cylinder motorcycle engine [C]∥Small Engine Technology Conference Exposition. Warrendale, PA, USA: SAE International, 2008: 2008-32-0018.
WANG Liyuan, YANG Liping, SONG Enzhe, et al. Effect of port gas injection on the combustion instabilities in a spark-ignition lean-burn natural gas engine [J]. International Journal of Bifurcation and Chaos, 2018, 28(10): 1850124.
YANG Liping, SONG Enzhe, DING Shunliang, et al. Analysis of the dynamic characteristics of combustion instabilities in a pre-mixed lean-burn natural gas engine [J]. Applied Energy, 2016, 183: 746-759.
SONG Enzhe, LIU Zhenting, YANG Liping, et al. Effects of nozzle structure on the gas mixture uniformity of marine gas engine [J]. Ocean Engineering, 2017, 142: 507-520.
SEMIN, CAHYONO B, AMIADJI, et al. Air-fuel mixing and fuel flow velocity modeling of multi holes injector nozzle on CNG marine engine [J]. Procedia Earth and Planetary Science, 2015, 14: 101-109.
HAJBABAEI M, KARAVALAKIS G, JOHNSON K C, et al. Impact of natural gas fuel composition on criteria, toxic, and particle emissions from transit buses equipped with lean burn and stoichiometric engines [J]. Energy, 2013, 62: 425-434.
SEBOLDT D, LEJSEK D, BARGENDE M. Injection strategies for low HC raw emissions in SI engines with CNG direct injection [J]. Automotive and Engine Technology, 2016, 1(1): 81-91.
WANG Tao, ZHANG Xin, ZHANG Jibao, et al. Numerical analysis of the influence of the fuel injection timing and ignition position in a direct-injection natural gas engine [J]. Energy Conversion and Management, 2017, 149: 748-759.
ZENG Ke, HUANG Zuohua, LIU Bing, et al. Combustion characteristics of a direct-injection natural gas engine under various fuel injection timings [J]. Applied Thermal Engineering, 2006, 26(8/9): 806-813.
YANG Bo, ZENG Ke. Effects of natural gas injection timing and split pilot fuel injection strategy on the combustion performance and emissions in a dual-fuel engine fueled with diesel and natural gas [J]. Energy Conversion and Management, 2018, 168: 162-169.
YANG Bo, WEI Xing, XI Chengxun, et al. Experimental study of the effects of natural gas injection timing on the combustion performance and emissions of a turbocharged common rail dual-fuel engine [J]. Energy Conversion and Management, 2014, 87: 297-304.
YOU Jinwen, LIU Zhongchang, WANG Zhongshu, et al. Impact of natural gas injection strategies on combustion and emissions of a dual fuel natural gas engine ignited with diesel at low loads [J]. Fuel, 2020, 260: 116414.
COLEMAN H W, STEELE W G. Experimentation and uncertainty analysis for engineers [M]. New York, USA: Wiley-Interscience, 1989: 28-42.
LI Weifeng, LIU Zhongchang, WANG Zhongshu. Experimental and theoretical analysis of the combustion process at low loads of a diesel natural gas dual-fuel engine [J]. Energy, 2016, 94: 728-741.
ACAR M S, ERBAS O, ARSLAN O. The performance of vapor compression cooling system aided Ranque-Hilsch vortex tube [J]. Thermal Science, 2019, 23(Part B): 1189-1201.
PAUL A, BOSE P K, PANUA R S, et al. An experimental investigation of performance-emission trade off of a CI engine fueled by diesel-compressed natural gas(CNG)combination and diesel-ethanol blends with CNG enrichment [J]. Energy, 2013, 55: 787-802.
ZHAO Dongmei, XIA Yifan, GE Haiwen, et al. Simulations of flame propagation during the ignition process in an annular multiple-injector combustor [J]. International Journal of Numerical Methods for Heat Fluid Flow, 2019, 29(6): 1947-1964.
DONG Quan, YANG Xiyu, JIA Demin, et al. Measurement and verification of transient injection flow rate of high pressure natural gas pulse injector [J]. Flow Measurement and Instrumentation, 2020, 76: 101831.
DONG Quan, TAO Feng, YAO Chong, et al. Measurement technology and analysis of gas injection rate for the compressed natural gas(CNG)engine [J]. Journal of Harbin Engineering University, 2018, 39(10): 1640-1648.