Accuracy Prediction and Repair Planning of Steam Turbine Flow Clearance

doi:10.7652/xjtuxb202112011

您当前的位置：

首页 >

文章列表页 >

Accuracy Prediction and Repair Planning of Steam Turbine Flow Clearance

更新时间：2025-07-09

- Accuracy Prediction and Repair Planning of Steam Turbine Flow Clearance
- Vol. 55, Issue 12, Pages: 87-97(2021)
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb202112011
  CLC： TP391.7
- Online First：10 December 2021，
  
  Published：2021
- 稿件说明：
移动端阅览
Accuracy Prediction and Repair Planning of Steam Turbine Flow Clearance[J]. 2021, 55(12): 87-97.
DOI：

Accuracy Prediction and Repair Planning of Steam Turbine Flow Clearance[J]. 2021, 55(12): 87-97. DOI： 10.7652/xjtuxb202112011.

摘要

针对汽轮机通流间隙装配精度难以保障

需要反复装配及调整

缺乏事先的仿真、预判及修正

难以适应数字化装配转型需求的问题

提出一种汽轮机通流间隙精度预测与修配规划方法。该方法首先基于规则推理进行一次修配

确保汽轮机可以满足除通流间隙以外的其他主要装配要求

防止因不能成功装配而引起的零部件返修; 其次根据产品装配工艺信息

通过构建装配特征网络

引入深度优先搜索算法

生成通流间隙装配尺寸链

进而实现通流间隙的精度预测; 然后考虑尺寸链之间的耦合特性

基于案例推理进行二次修配

通过案例检索获得修配环的修配范围

以及基于粒子群算法的最优修配量

确保通流间隙能够满足设计要求。以某型号汽轮机装配单元为例进行应用验证

结果表明

提出的方法可成功根据采集到的实测数据实现通流间隙的精度预测

并输出对应的修配建议

为实物装配提供参考

进而提高汽轮机的一次装配成功率及装配效率。

Abstract

It is difficult to guarantee assembly accuracy of steam turbine flow clearance due to repeated assembly and adjustments in the case of lack of prior simulation

prediction and correction. To meet the requirements of digital assembly transformation

a steam turbine flow clearance accuracy prediction and repair planning method is proposed. The primary repair is carried out following the rule-based reasoning to ensure the turbine

except the flow clearance

to meet the main assembly requirements and prevent the parts from being repaired due to assembly failure. The assembly feature network is constructed according to the product assembly process information

and the depth first search algorithm is used to realize the generation of the flow clearance assembly dimension chains

then the accuracy prediction of flow clearance is realized. Considering the coupling characteristics of the dimension chains

the secondary repair is carried out following the case-based reasoning

and via case retrieval the repair range of repair ring is obtained and the optimal repair quantity is achieved with particle swarm optimization algorithm to ensure the flow clearance to meet the design requirements. A turbine assembly unit is used as an example for application verification. The results show that this method can successfully predict the accuracy of flow clearance according to the collected measurement data and can output corresponding repair suggestions

and then improve the first-time assembly success rate and assembly efficiency of steam turbine.

关键词

Keywords

references

刘检华, 孙清超, 程晖, 等. 产品装配技术的研究现状、技术内涵及发展趋势 [J]. 机械工程学报, 2018, 54(11): 1-28.

LIU Jianhua, SUN Qingchao, CHENG Hui, et al. The state-of-the-art, connotation and developing trends of the products assembly technology [J]. Journal of Mechanical Engineering, 2018, 54(11): 1-28.

曹丽华, 贾彦铭, 李盼, 等. 汽轮机高低齿叶顶汽封泄漏流动的数值分析 [J]. 浙江大学学报(工学版), 2016, 50(8): 1545-1550.

CAO Lihua, JIA Yanming, LI Pan, et al. Numerical analysis on leakage flow of blade tip stepped seal in steam turbine [J]. Journal of Zhejiang University(Engineering Science), 2016, 50(8): 1545-1550.

张立祥, 苏首淼. 浅谈汽轮机安装检修中的间隙测量与调整 [J]. 中国设备工程, 2019(17): 24-25.

卢秉恒. 机械制造技术基础 [M]. 4版. 北京: 机械工业出版社, 2018: 188-194.

刘伟东, 宁汝新, 刘检华, 等. 机械装配偏差源及其偏差传递机理分析 [J]. 机械工程学报, 2012, 48(1): 156-168.

LIU Weidong, NING Ruxin, LIU Jianhua, et al. Mechanism analysis of deviation sourcing and propagation for mechanical assembly [J]. Journal of Mechanical Engineering, 2012, 48(1): 156-168.

NAYROLES B. Plate theory and complementary displacement method [J]. International Journal of Solids and Structures, 1999, 36(9): 1329-1368.

MUJEZINOVIC A, DAVIDSON J K, SHAH J J. A new mathematical model for geometric tolerances as applied to polygonal faces [J]. Journal of Mechanical Design, 2004, 126(3): 504-518.

DESROCHERS A, GHIE W, LAPERRIÈRE L. Application of a unified Jacobian: torsor model for tolerance analysis [J]. Journal of Computing and Information Science in Engineering, 2003, 3(1): 2-14.

BJORKE O, DEVRIES W R. Computer-aided tolerancing, second edition [J]. Journal of Engineering for Industry, 1991, 113(1): 118.

王恒, 宁汝新, 唐承统. 三维装配尺寸链的自动生成 [J]. 机械工程学报, 2005, 41(6): 181-187.

WANG Heng, NING Ruxin, TANG Chengtong. Automatic generation of 3D assembly dimension chains [J]. Journal of Mechanical Engineering, 2005, 41(6): 181-187.

周江奇, 陈关龙, 来新民, 等. 车身装配尺寸链生成方法 [J]. 机械工程学报, 2005, 41(7): 164-168.

ZHOU Jiangqi, CHEN Guanlong, LAI Xinmin, et al. Generation method of automobile body assembly dimension chain [J]. Journal of Mechanical Engineering, 2005, 41(7): 164-168.

FRANCIOSA P, PATALANO S, RIVIERE A. 3D tolerance specification: an approach for the analysis of the global consistency based on graphs [J]. International Journal on Interactive Design and Manufacturing(IJIDeM), 2010, 4(1): 1-10.

郭崇颖, 刘检华, 唐承统, 等. 基于图论的装配尺寸链自动生成技术 [J]. 计算机集成制造系统, 2014, 20(12): 2980-2990.

GUO Chongying, LIU Jianhua, TANG Chengtong, et al. Automatic generation technology of assembly dimension chain based on graph theory [J]. Computer Integrated Manufacturing Systems, 2014, 20(12): 2980-2990.

ZHU Xinglei, LI Yingguang, WANG Wei, et al. Automatic generation of assembly dimension chain based on tolerance cell [J]. Computer Aided Drafting, Design and Manufacturing, 2012, 22(1): 77-83.

鲍强伟, 樊友高, 丁晓宇, 等. 基于信息单元的装配尺寸链自动生成技术 [J]. 计算机辅助设计与图形学学报, 2016, 28(11): 1989-1999.

BAO Qiangwei, FAN Yougao, DING Xiaoyu, et al. A method of automatic generation of assembly dimension chains based on information cells [J]. Journal of Computer-Aided Design Computer Graphics, 2016, 28(11): 1989-1999.

JIN Jionghua, SHI Jianjun. State space modeling of sheet metal assembly for dimensional control [J]. Journal of Manufacturing Science and Engineering, 1999, 121(4): 756-762.

田兆青, 来新民, 林忠钦. 多工位薄板装配偏差流传递的状态空间模型 [J]. 机械工程学报, 2007, 43(2): 202-209.

TIAN Zhaoqing, LAI Xinmin, LIN Zhongqin. State space model of variations stream propagation in multistation assembly processes of sheet metal [J]. Journal of Mechanical Engineering, 2007, 43(2): 202-209.

洪军, 郭俊康, 刘志刚, 等. 基于状态空间模型的精密机床装配精度预测与调整工艺 [J]. 机械工程学报, 2013, 49(6): 114-121.

HONG Jun, GUO Junkang, LIU Zhigang, et al. Assembly accuracy prediction and adjustment process modeling of precision machine tool based on state space model [J]. Journal of Mechanical Engineering, 2013, 49(6): 114-121.

李兴炜. 汽轮机通流间隙预测与预修配的关键技术研究 [D]. 西安: 西安交通大学, 2020: 52-72.

AVDEENKO T V, MAKAROVA E S. Integration of case-based and rule-based reasoning through fuzzy inference in decision support systems [J]. Procedia Computer Science, 2017, 103: 447-453.

娄洪, 陈琨, 李兴炜, 等. 多源多工序加工过程波动扩散网络建模与波动源辨识 [J]. 西安交通大学学报, 2021, 55(2): 73-83.

LOU Hong, CHEN Kun, LI Xingwei, et al. Fluctuation diffusion network modeling and fluctuation source identification of multi-fluctuation-source and multi-process machining processes [J]. Journal of Xi'an Jiaotong University, 2021, 55(2): 73-83.

张嘉锟, 陈琨, 于慧, 等. 面向误差传递的复杂机械产品装配单元划分方法 [J]. 西安交通大学学报, 2021, 55(4): 86-94.

ZHANG Jiakun, CHEN Kun, YU Hui, et al. Assembly unit partitioning method of complex mechanical products for error propagation [J]. Journal of Xi'an Jiaotong University, 2021, 55(4): 86-94.

巩亚东, 史家顺, 朱立达. 机械制造技术基础 [M]. 2版. 北京: 科学出版社, 2017: 234-236.

李世春. 基于串并联关系的尺寸链增减环判断方法 [J]. 装备制造技术, 2009(5): 61-62.

LI Shichun. The method of judging dimension chains based on series-parallel connection [J]. Equipment Manufacturing Technology, 2009(5): 61-62.

KOLODNER J L. Improving human decision making through case-based decision aiding [J]. AI Magazine, 1991, 12(2): 52-68.

李丽丽, 高智勇, 高建民, 等. 航空发动机风扇转子动叶的选配优化技术研究 [J]. 西安交通大学学报, 2021, 55(9): 60-70.

LI Lili, GAO Zhiyong, GAO Jianmin, et al. Research on selecting-matching optimization technologies of fan rotor blades of aircraft engine [J]. Journal of Xi'an Jiaotong University, 2021, 55(9): 60-70.

KENNEDY J, EBERHART R. Particle swarm optimization [C]∥Proceedings of International Conference on Neural Networks. Piscataway, NJ, USA: IEEE, 1995: 1942-1948.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on Digital Twin Assembly Cell Modeling and Quality Optimization Control Framework

Contour Error Prediction Method of Part for Five-Axis Machining

Knowledge Graph Representation Learning Driven by Semantic Discrimination and Subgraph Integration

Mechanism and Optimal Control Strategy for Hysteresis in Rapid Dehumidification Response of Indirect Thermal Systems in Electric Vehicles

Influence of Structural Parameters on the Summer Operational Characteristics of a Three-Tower-in-One Indirect Air-Cooling System

Related Author

ZOU Yongcheng

MEN Songchen

MA Dongxu

ZHANG Chao

ZHOU Guanghui

WANG Rui

MA Dongxu

ZOU Yongcheng

Related Institution

School of Mechanical Engineering, Xi'an Jiaotong University

School of Science, Xi'an University of Architecture and Technology

State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University

School of Mechanical Engineering, Xi’an Jiaotong University

State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University

⁰