Numerical Investigation on the Flow and Heat Transfer Characteristics of the Flow-Around Rib Channel[J]. 2021, 55(11): 8-16.
DOI:
Numerical Investigation on the Flow and Heat Transfer Characteristics of the Flow-Around Rib Channel[J]. 2021, 55(11): 8-16.DOI: 10.7652/xjtuxb202111002.
Numerical Investigation on the Flow and Heat Transfer Characteristics of the Flow-Around Rib Channel
To further improve the heat transfer performance and reduce the pressure loss in the internal cooling of gas turbine blade
the flow and heat transfer characteristics of six rib structures in the rectangular channel were numerically studied by CFX software under the Reynolds number of 20 000-80 000. The aspect ratio of the rectangular channel was 4:1
and the rib spacing to rib height ratio(p/e)was 10. The results show that the recirculation zone has a great influence on the heat transfer performance downstream of the rib
and weakening the recirculation zone will reduce the heat transfer performance. The flow-around rib can eliminate the heat transfer deterioration area near the bottom of the leading/trailing edge of the solid rib channel
and the square flow-around rib channel has better thermal performance than the circular flow-around rib channel. For the flow-around rib channels
with the decrease of the rib cross-sectional area reduction ratio ψ
the thermal performance of the channel improves
but the friction factor is increased. The square flow-around ribs with large side-lengths obtain the best thermal performance and heat transfer performance among the ribs studied in this paper. Compared with the solid ribs
the area average Nusselt number of the square flow-around ribs with large side-lengths increases by 0.92%-2.73%
and the friction factor in the heating section decreases by 10.89%-11.01%
which makes the thermal performance factor increase by 4.92%-6.75%.
关键词
Keywords
references
KAEWCHOOTHONG N,MALIWAN K,TAKEISHI K, et al. Effect of inclined ribs on heat transfer coefficient in stationary square channel [J]. Theoretical & Applied Mechanics Letters, 2017, 7(6): 344-350.
JANSANGSUK D, KHANOKNAIYAKARN C, PROMVONGE P. Experimental study on heat transfer and pressure drop in a channel with triangular V-ribs [C]∥2010 Proceedings of the International Conference on Energy and Sustainable Development. Piscataway, NJ, USA: IEEE, 2010: 1-8.
YANG Qi, ZHANG Zongwei, QIAN Weijia, et al. Study of the mechanism and variation law governing the intensified heat transfer in a rectangular channel with staggered V-shaped ribs and inverted V-shaped ribs [J]. Journal of Engineering for Thermal Energy and Power, 2018, 33(4): 21-26.
LIU Cong, WANG Zhao, ZHANG Zongwei. Investigation on heat transfer augmentation in a inner-cooling passage with triangular V-shaped and inverse V-shaped ribs [J]. Journal of Propulsion Technology, 2019, 40(9): 2040-2049.
LI Yanlin, RAO Yu, WANG Deqiang. Numerical study on turbulent heat transfer of miniature ribs in turbine blade internal passage [J]. Journal of Engineering Thermophysics, 2018, 39(10): 2271-2279.
LIU Huichun, WANG Jianhua. Numerical investigation on synthetical performances of fluid flow and heat transfer of semiattached rib-channels [J]. International Journal of Heat and Mass Transfer, 2011, 54(1/2/3): 575-583.
SU Sheng, HU Jie, LIU Jianjun, et al. Numerical simulation on heat transfer in duct roughened by periodic alternate scale ribs [J]. Journal of Aerospace Power, 2008, 23(12): 2274-2279.
XIE Gongnan, ZHENG Shaofei, ZHANG Weihong, et al. A numerical study of flow structure and heat transfer in a square channel with ribs combined downstream half-size or same-size ribs [J]. Applied Thermal Engineering: Design, Processes, Equipment, Economics, 2013, 61(2): 289-300.
LUO Ma, HE Yihong, SUN Ruijia, et al. Experimental study on heat transfer characteristics of high blockage ribs channel [J]. Journal of Nanjing University of Aeronautics Astronautics, 2018, 50(4): 471-476.
GONG Jianying, GAO Tieyu, WU Weifeng, et al. optimized design of internal ribbed straight channels for gas turbine [J]. Compressor Technology, 2019(4): 13-17.
XI Lei, XU Liang, GAO Jianmin, et al. Experimental study on the cooling performance of thick-wall ribbed channels in turbine blade [J]. Journal of Xi'an Jiaotong University, 2021, 55(3): 29-36.
HWANG J J, LIOU T M. Heat transfer in a rectangular channel with perforated turbulence promoters using holographic interferometry measurement [J]. International Journal of Heat Mass Transfer, 1995, 38(17): 3197-3207.
BUCHLIN J M. Convective heat transfer in a channel with perforated ribs [J]. International Journal of Thermal Sciences, 2002, 41(4): 332-340.
LIU Jian, HUSSAIN S, WANG Wei, et al. Heat transfer enhancement and turbulent flow in a rectangular channel using perforated ribs with inclined holes [J]. ASME Journal of Heat Transfer, 2019, 141(4): 041702.
LIOU T M, CHEN S H, SHIH K C. Numerical simulation of turbulent flow field and heat transfer in a two-dimensional channel with periodic slit ribs [J]. International Journal of Heat Mass Transfer, 2002, 45(22): 4493-4505.
HWANG J J, LIOU T M. Heat transfer and friction in a low-aspect-ratio rectangular channel with staggered perforated ribs on two opposite walls [J]. Journal of Heat Transfer, 1995, 117(4): 843-850.
YANG Y T, HWANG C W. Numerical calculations of heat transfer and friction characteristics in rectangular ducts with slit and solid ribs mounted on one wall [J]. Numerical Heat Transfer, 2004, 45(4): 363-375.
TARIQ A, PANIGRAHIP K, MURALIDHAR K. Flow and heat transfer in the wake of a surface-mounted rib with a slit [J]. Experiments in Fluids: Experimental Methods and Their Applications to Fluid Flow, 2004, 37(5): 701-719.
SHARMA N, ALI M S, TARIQ A, et al. Detailed heat transfer and friction factor characteristics in a rectangular duct with alternate solid and converging-slit ribs [J]. Experimental Heat Transfer, 2018, 31(4/5/6): 552-570.
LI Xin, XIE Gongnan, LIU Jian, et al. Parametric study on flow characteristics and heat transfer in rectangular channels with strip slits in ribs on one wall [J]. International Journal of Heat and Mass Transfer, 2020, 149: 118396.