Comprehensive Optimization for the Structure of Three-Phase Spacer in 252 kV Compact Gas Insulated Metal Enclosed Transmission Line[J]. 2020, 54(12): 138-146.
DOI:
Comprehensive Optimization for the Structure of Three-Phase Spacer in 252 kV Compact Gas Insulated Metal Enclosed Transmission Line[J]. 2020, 54(12): 138-146.DOI: 10.7652/xjtuxb202012017.
Comprehensive Optimization for the Structure of Three-Phase Spacer in 252 kV Compact Gas Insulated Metal Enclosed Transmission Line
A comprehensive optimization study is carried out by an intelligent algorithm to uniformize the electric and stress field distributions of three-phase spacer in 252 kV compact gas insulated metal enclosed transmission line. 3-D finite element simulation models of the three-phase spacer are established. Distributions of electric and stress fields for three structures are compared and the influences of structural parameters on electric and stress fields are studied. Then
a Bernstein equation is established to describe the profile of insulator surface
and the corresponding constraints and simplification methods are also discussed. The intelligent optimization of the three-phase spacer is realized by combining COMSOL and MATLAB and using a particle swarm algorithm. Results and a comparison with the original structure show that the maximum values of total field
tangential field and stress of the optimized spacer decrease by 13.5%
16.0% and 8.5%
respectively
and all of them meet control values. The proposed optimization method for complex profile efficiently improves the distributions of the electric and stress fields. The results provides guidance and reference for the structural design of 252 kV compact gas insulated metal enclosed transmission line.
LI Peng, YAN Xianglian, WANG Hao, et al. Research and application of UHVAC gas-insulated transmission line [J]. Power System Technology, 2017, 41(10): 3161-3167.
GAO Keli, YAN Xianglian, WANG Hao, et al. Progress in environment-friendly gas-insulated transmission line(GIL)[J]. High Voltage Engineering, 2018, 44(10): 3105-3113.
LI Peng, LI Zhibing, SUN Qian, et al. Research on insulation design of UHV gas-insulated metal enclosed transmission line [J]. Power System Technology, 2015, 39(11): 3305-3312.
KHAN D, RAFIQ M, RAFIQUE S F, et al. Comparison of transmission losses and voltage drops of GIL(Gas Insulated transmission line)and overhead transmission lines [C]∥Power Electronics Motion Control Conference Exposition. Piscataway, NJ, USA: IEEE, 2014: 1151-1153.
LI Bin, ZHANG Lie, ZHANG Wei. Reliability and applicability design of GIL in river tunnel and urban pipe corridor [J]. High Voltage Apparatus, 2019, 55(6): 1-14.
FEI Longfei, GONG Xiaoyan, CHEN Wei. Factors influencing the water pressure of insulating spacer in GIS/GCB [J]. High Voltage Apparatus, 2014, 50(4): 125-130.
WU Zehua, TIAN Huidong, JIN Shoufeng, et al. Design and optimization of insulation structure of three-phase tri-post insulator in 252 kV compact GIL [J]. High Voltage Engineering, 2020, 46(6): 2030-2039.
WU Shengbin, JIANG Xu, XIN Zhaozhao, et al. Simulation analysis and structure optimization based on the hydrostatic test of 252 kV three-phase basin type insulator [J]. High Voltage Apparatus, 2018, 54(5): 133-137.
MASHIKIAN M S, WHITNEY B F, FREEMAN J J. Optimal design and laboratory testing of post-type spacers for three-phase, SF6 insulated cables: part one Optimization philosophy, design and test results [J]. IEEE Transactions on Power Apparatus and System, 1978, 91(3): 914-918.
XU Jianyuan, WANG Feng, XIAO Fengliang. Three dimensional electric field calculation of the disk type insulator inside of three phase in on tank type of GIS [J]. High Voltage Engineering, 2000, 26(1): 11-13, 21.
JIA Yunfei, GAO Lu, JI Shengchang, et al. Comprehensive optimization of electrical and mechanical performance of 1 100 kV basin-type insulator based on genetic algorithm and finite element simulation [J]. High Voltage Engineering, 2019, 45(12): 3844-3853.
ZHANG Shiling, PENG Zongren, DU Jinqiao, et al. Three-dimensional electric field simulation and inner shielding structure optimization of ±1 100 kV wall bushing with RBF neural network and NSGA-II algorithm [J]. High Voltage Engineering, 2014, 40(6): 1847-1857.
HUANG Ling, WEN Xishan, LAN Lei, et al. Optimization of grading rings for UHV composite insulator by the improved GA [J]. High Voltage Engineering, 2009, 35(2): 218-224.
WU Zehua, TIAN Huidong, WANG Haoran, et al. Optimization design method for UHVAC GIL dumbbell type tri-post insulators [J]. Power System Technology, 2020, 44(7): 2754-2761.
GUO Zihao, WANG Haoran, LI He, et al. Calculation and experimental study on strain and stress distribution of UHV GIS spacer during hydrostatic test. High Voltage Engineering, 2018, 44(3): 993-1002.
XIAO Weiming, WANG Guijun. Design and approximation of SISO three layers feedforward neural network based on Bernstein polynomials [J]. Journal of Shandong University(Natural Science), 2018, 53(9): 55-61.
WANG Shan, LIU Ming, YAN Junjie. Optimizing heat-power load distribution of thermal power plants based on particle swarm algorithm [J]. Journal of Xi'an Jiaotong University, 2019, 53(9): 159-166.