Data Driven Analysis for Departure Behavior Characteristics of Flow Boiling Bubbles in the Vertical Channel

doi:10.7652/xjtuxb202011021

您当前的位置：

首页 >

文章列表页 >

Data Driven Analysis for Departure Behavior Characteristics of Flow Boiling Bubbles in the Vertical Channel

更新时间：2025-07-09

- Data Driven Analysis for Departure Behavior Characteristics of Flow Boiling Bubbles in the Vertical Channel
- Vol. 54, Issue 11, Pages: 175-184(2020)
- 作者机构：
  
  西安交通大学动力工程多相流国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb202011021
  CLC： V211.1+7
- Online First：10 November 2020，
  
  Published：2020
- 稿件说明：
移动端阅览
Data Driven Analysis for Departure Behavior Characteristics of Flow Boiling Bubbles in the Vertical Channel[J]. 2020, 54(11): 175-184.
DOI：

Data Driven Analysis for Departure Behavior Characteristics of Flow Boiling Bubbles in the Vertical Channel[J]. 2020, 54(11): 175-184. DOI： 10.7652/xjtuxb202011021.

摘要

为了研究过冷沸腾过程中气泡的脱离特性

基于统计学分析方法

利用公开发表的实验数据和经验关联式构建驱动分析数据库

运用有限混合模型和标准方差分解方法对竖直过热壁面上流动沸腾气泡脱离直径的影响因素进行数据驱动分析研究。将描述流动沸腾的量纲一参数组作为模型的输入变量

气泡脱离直径作为输出变量

采用Kullback-Leibler散度和χ

距离对于输入变量的敏感性程度顺序分别进行评估。初步的数据驱动分析结果表明:雷诺数和气液密度比对气泡脱离直径的影响最为显著

与传统方法取得的结果具有一致性

证明了数据驱动方法在分析物理问题上的可行性; 在现有数据库的基础上

有限混合模型比标准方差分解方法更具一般性

可以直接基于数据库进行应用。

Abstract

To reveal the bubble detachment behaviors during subcooled boiling process

a data driven statistical analysis method according to the finite mixing model(FMM)and the standard variance decomposition(Sobol model)is employed to investigate the influence factors of bubble departure diameter on superheated wall surface in vertical flow boiling. The data driven database is constructed and modified based on the experimental data and empirical correlations collected from literature. The dimensionless parameters describing flow boiling are chosen as the input variables of this model

and bubble departure diameter as the output variable. Kullback-Leibler divergence and χ

distance are adopted for determining the importance degree order of input variables. T

he preliminary results of sensitivity analysis show that the effects of Reynolds number and vapour-liquid density ratio on bubble departure diameter are the most significant among these inputs. The results coincide well with those obtained by the traditional methods

which indicates the feasibility of the data-driven method in analyzing engineering problems. In addition

FMM is more general than Sobol model based on the present database

and can be applied directly based on these data.

关键词

Keywords

references

REN Tingting, ZHU Zhiqiang, YAN Meiyue, et al. Experimental study on bubble nucleation and departure for subcooled flow boiling in a narrow rectangular channel [J]. International Journal of Heat and Mass Transfer, 2019, 144: 118670.

ZHOU Pei, HUANG Ronghua, HUANG Sheng, et al. Experimental investigation on bubble contact diameter and bubble departure diameter in horizontal subcooled flow boiling [J]. International Journal of Heat and Mass Transfer, 2020, 149: 119105.

BROOKS C S, HIBIKI T. Wall nucleation modeling in subcooled boiling flow [J]. International Journal of Heat and Mass Transfer, 2015, 86: 183-196.

RAJ S, PATHAK M, KHAN M K. An analytical model for predicting growth rate and departure diameter of a bubble in subcooled flow boiling [J]. International Journal of Heat and Mass Transfer, 2017, 109: 470-481.

KLAUSNER J F, MEI R, BERNHARD D M, et al. Vapor bubble departure in forced convection boiling [J]. International Journal of Heat and Mass Transfer, 1993, 36(3): 651-662.

DU Jingyu, ZHAO Chenru, BO Hanliang. Investigation of bubble departure diameter in horizontal and vertical subcooled flow boiling [J]. International Journal of Heat and Mass Transfer, 2018, 127: 796-805.

ZHAO Xingang, SHIRVAN K, SALKO R K, et al. On the prediction of critical heat flux using a physics-informed machine learning-aided framework [J]. Applied Thermal Engineering, 2020, 164: 114540.

BRUDER M, BLOCH G, SATTELMAYER T. Critical heat flux in flow boiling: review of the current understanding and experimental approaches [J]. Heat Transfer Engineering, 2017, 38(3): 347-360.

SALTELLI A, TARANTOLA S, CAMPOLONGO F, et al. Sensitivity analysis in practice [M]. Chichester, UK: John Wiley Sons Co., Ltd., 2002: 1-25.

CASTILLO E, CASTILLO C, HADI A S, et al. Some new methods for local sensitivity analysis in statistics [M]∥Statistics for Industry and Technology. Boston, MA, USA: Birkhäuser Boston Inc., 2006: 343-362.

YANG X M, WU Z. Regional sensitivity analysis of the M-E flexible pavement design using the Monte Carlo filtering method [C]∥Proceeding of the 2013 Airfield Highway Pavement Conference. Reston, VA, USA: American Society of Civil Engineers, 2013: 456-464.

DI MAIO F, NICOLA G, ZIO E, et al. Finite mixture models for sensitivity analysis of thermal hydraulic codes for passive safety systems analysis [J]. Nuclear Engineering and Design, 2015, 289: 144-154.

ZHOU Yang, SHI Zhixiong, SHI Zhengyu, et al. Disaggregating power consumption of commercial buildings based on the finite mixture model [J]. Applied Energy, 2019, 243: 35-46.

HUANG Weinan, DONG Sheng. Probability distribution of wave periods in combined sea states with finite mixture models [J]. Applied Ocean Research, 2019, 92: 101938.

AHMADI R, UENO T, OKAWA T. Bubble dynamics at boiling incipience in subcooled upward flow boiling [J]. International Journal of Heat and Mass Transfer, 2012, 55(1/2/3): 488-497.

BROOKS C S, SILIN N, HIBIKI T, et al. Experimental investigation of wall nucleation characteristics in flow boiling [J]. Journal of Heat Transfer, 2015, 137(5): 051501.

YUAN Dewen, PAN Liangming, CHEN Deqi, et al. Bubble behavior of high subcooling flow boiling at different system pressure in vertical narrow channel [J]. Applied Thermal Engineering, 2011, 31(16): 3512-3520.

SUGRUE R, BUONGIORNO J, MCKRELL T. An experimental study of bubble departure diameter in subcooled flow boiling including the effects of orientation angle, subcooling, mass flux, heat flux, and pressure [J]. Nuclear Engineering and Design, 2014, 279: 182-188.

管鹏. 流动沸腾中汽泡行为的理论与实验研究 [D]. 北京: 北京交通大学, 2014: 17-32.

GUAN Peng, JIA Li, YIN Liaofei, et al. Bubble departure size in flow boiling [J]. Heat and Mass Transfer, 2015, 51(7): 921-930.

柴银萍. 细小狭窄通道内流动沸腾传热实验研究 [D]. 北京: 北京交通大学, 2012: 20-59.

BASU N. Modeling and experiments for wall heat flux partitioning during subcooled flow boiling of water at low pressures [D]. Los Angeles, CA, USA: UCLA, 2003: 68-107.

GUNGOR K E, WINTERTON R H S. A general correlation for flow boiling in tubes and annuli [J]. International Journal of Heat and Mass Transfer, 1986, 29(3): 351-358.

BASU N, WARRIER G R, DHIR V K. Wall heat flux partitioning during subcooled flow boiling: part I Model development [J]. Journal of Heat Transfer, 2005, 127(2): 131-140.

BASU N, WARRIER G R, DHIR V K. Wall heat flux partitioning during subcooled flow boiling: part II Model validation [J]. Journal of Heat Transfer, 2005, 127(2): 141-148.

KOCAMUSTAFAOGULLARI G, ISHII M. Interfacial area and nucleation site density in boiling systems [J]. International Journal of Heat and Mass Transfer, 1983, 26(9): 1377-1387.

FRITZ W. The calculation of the maximum volume of steam bladders [J]. Physikalische Zeitschrift, 1935, 36: 379-384.

PRODANOVIC V, FRASER D, SALCUDEAN M. Bubble behavior in subcooled flow boiling of water at low pressures and low flow rates [J]. International Journal of Multiphase Flow, 2002, 28(1): 1-19.

SOBOL I M. Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates [J]. Mathematics and Computers in Simulation, 2001, 55(1/2/3): 271-280.

RAJ S, PATHAK M, KALEEM KHAN M. An improved mechanistic model for predicting bubble characteristic size in subcooled flow boiling [J]. International Journal of Heat and Mass Transfer, 2020, 149: 119188.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical Simulation of Subcooled Boiling Water in Vertical Concentric Annulus under Low Pressure

Unsupervised Learning for Finite Mixture Models Via Modified Gibbs Sampling

Experiment of Flow Boiling Heat Transfer on Micro-Pin-Finned Chips with Jet Impingement

A Partition Algorithm of Measurement Sets for Extended Objects

Experimental Research on the Flow Boiling Heat Transfer Characteristic of Dilute Emulsion in Micro-Channel

Related Author

王斯民

厉彦忠

陈二锋

石勇

韩崇昭

刘伟峰

张永海

魏进家

Related Institution

School of Energy and Power Engineering, Xi'an Jiaotong University

School of Electronics and Information Engineering, Xi'an Jiaotong University

State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University

School of Electrical and Information Engineering, Jiangsu University

(School of Energy and Power Engineering, Xi'an Jiaotong University,,)

⁰