To understand the combustion characteristics of Zhundong coal in the cyclone furnace with liquid slagging
numerical simulation of cyclone combustion process of Zhundong coal was conducted. The heat and mass transfer models were established to solve the thermophysical parameters of the slag film
and the parameters were introduced into the combustion CFD model as the boundary condition. The results show that the calculated flame temperature is consistent with the measured value of thermocouple
and the maximum error is less than 4%. The ash particles larger than 10 -m may collide with the slag film and be adhered to the slag
and the particle deposition can be simplified to a single collision. The slag film thickness is non-uniformly distributed along the cyclone furnace length
and the maximum thickness is about 2 mm. The slag film can be approximated as the flow boundary layer of Newtonian fluid. The slag temperature in the slagging outlet is higher than the temperature correspondin
关键词
Keywords
references
XU L, LIU J, KANG Y, et al. Safely burning high alkali coal with kaolin additive in a pulverized fuel boiler [J]. Energy & Fuels, 2014, 28(9): 5640-5648.
WEI B, TAN H, WANG Y, et al. Investigation of characteristics and formation mechanisms of deposits on different positions in full-scale boiler burning high alkali coal [J]. Applied Thermal Engineering, 2017, 119(5): 449-458.
CHUDNOVSKY B, TALANKER A, BERMAN Y, et al. Prediction of performance from PRB coal fired in utility boilers with various furnace and firing system arrangements [J]. Journal of Engineering for Gas Turbines and Power, 2010, 32(12): 27-34.
LI Xiaoyu, LI Guangyu, XU Shisen, et al. Research on flow and heat transfer of slag film in gasifier with liquid slag-removal process [J]. Proceedings of the CSEE, 2009, 29(14): 12-17.
LI Daili, WANG Zhihua, XU Yanwei, et al. Numerical simulation of combustion process for a slag tapping boiler [J]. Journal of Zhejiang University, 2013, 47(2): 280-286.
VANEYK P J, ASHMAN P J, NATHAN G J. Mechanism and kinetics of sodium release from brown coal char particles during combustion [J]. Combustion and Flame, 2011, 158(12): 2512-2523.
ZHOU Junhu, KUANG Jianping, ZHOU Zhijun, et al. Numerical simulation for pulverized coal gasifier's fluid flow characteristic on cold and hot condition [J]. Proceedings of the CSEE, 2007, 27(20): 30-35.
ZHOU Junhu, KUANG Jianping, ZHOU Zhijun, et al. Numerical simulation for pulverized coal gasifier heating nozzle and slag building model [J]. Proceedings of the CSEE, 2007, 27(26): 23-29.
WANG X, ZHAO D, HE L, et al. Modeling of a coal-fired slagging combustor: development of a slag sub-model [J]. Combustion Flame, 2007, 149(3): 249-260.
WANG X, ZHAO D, HE L, et al. A review on numerical modeling of ash deposition during the process of pulverized coal combustion [J]. Advances in Mechanics, 2005, 35(3): 417-426.
LIU S, HAO Y. Numerical simulation of flow and heat transfer of s lag layer in an entrained-flow coal gasifier [J]. Journal of Engineering Thermophysics, 2009, 30(4): 631-634.
LIU Sheng, HAO Yingli, DU Min, et al. A model of wall reaction in entrained-flow coal gasifier [J]. CIESC Journal, 2010, 61(5): 1219-1225.
ZHANG X, ZHENG S, ZHOU H, et al. Simultaneously reconstruction of inhomogeneous temperature and radiative properties by radiation image processing [J]. International Journal of Thermal Science, 2016, 107: 121-130.
SEGGIANI M. Modelling and simulation of time varying slag flow in a Prenflo entrained-flow gasifier [J]. Fuel, 1998, 77(14): 1611-1621.
RICHARDS G H, SLATER P N, HARB J N. Simulation of ash deposit growth in a pulverized coal fired pilot scale reactor [J]. Energy Fuels, 1993, 7(6): 774-781.
WATANABE H, OTAKA M. Numerical simulation of coal gasification in entrained flow coal gasifier [J]. Fuel, 2006, 85(6): 1935-1943.
DONG G, LI Z, ZHANG Z. Study on the vortex structure of coupling combustion stabilizer with square cylinder-strong swirl flow [J]. Procedia Engineering, 2015, 99: 741-745.