Energy Efficiency Analysis and Redesign of Flow Regenerating Hydraulic Valve for High Negative Pressure Hydraulic Cylinder System[J]. 2019, 53(7): 52-59.
DOI:
Energy Efficiency Analysis and Redesign of Flow Regenerating Hydraulic Valve for High Negative Pressure Hydraulic Cylinder System[J]. 2019, 53(7): 52-59.DOI: 10.7652/xjtuxb201907008.
Energy Efficiency Analysis and Redesign of Flow Regenerating Hydraulic Valve for High Negative Pressure Hydraulic Cylinder System
To solve the problem of low working efficiency and high energy loss caused by high negative pressure hydraulic cylinder systems
this paper proposes a method for redesigning the flow regenerating hydraulic valve in high negative pressure hydraulic cylinder system.Taking the common hydraulic valve used in a common type of earthmoving mechanical cylinder as the research object and using factorial analysis approach
it was found that the fixed liquid resistance parameter of the non-regenerative hydraulic circuit has a significant effect on the efficiency of flow regenerating hydraulic valve.To solve the problem of low oil supply efficiency
a novel method was proposed
which can change the fixed liquid resistance of the non-regenerative hydraulic circuit to a variable liquid resistance and hence forming a differential control combined with the variable liquid resistance of the regenerative hydraulic circuit.Based on the method
the structural redesign of the hydraulic valve
with four str
关键词
Keywords
references
DAL M F, MENEGHETTI A, NARDIN G, et al.Enhancing energy recovery in the steel industry: matching continuous charge with off-gas variability smoothing [J].Energy Convers Manage, 2015, 104: 78-89.
VALE S, HEBER L, COELHO P J, et al.Parametric study of a thermoelectric generator system for exhaust gas energy recovery in diesel road freight transportation [J].Energy Convers Manage, 2017, 133: 167-177.
TABATABAEIKIA S, GHAZALI N, CHONG W T, et al.Computational and experimental optimization of the exhaust air energy recovery wind turbine generator [J].Energy Convers Manage, 2016, 126: 862-874.
FU J Q, LIU J P, DEND B L, et al.An approach for exhaust gas energy recovery of internal combustion engine: steam-assisted turbocharging [J].Energy Convers Manage, 2014, 85: 234-44.
SCIUBBA E, TOCCI L, TORO C.Thermodynamic analysis of a Rankine dual loop waste thermal energy recovery system [J].Energy Convers Manage, 2016, 122: 109-118.
ASWIN K R, GREGORY M S, CODY M A, et al.Utilizing low airflow strategies including cylinder deactivation, to improve fuel efficiency and aftertreatment thermal management [J].International Journal of Engine Research, 2017, 18(10): 1005-1016.
THYAGESWARAN S.Regeneration in an internal combustion engine: thermal-hydraulic modeling and analysis [J].Applied Thermal Engineering, 2016, 93: 174-191.
LIN T L, CHEN Q, REN H L, et al.Boom energy recovery system with auxiliary throttle based on hybrid excavator [J].Journal Mechanical Engineering Science, 2017, 231(22): 4250-4262.
LIN Tianliang, YE Yueying, FU Shengjie.Research on the boom energy regeneration system based on construction machinery [J].Fluid Power Transmission and Control, 2014, 63: 8-14.
LU L, YAO B.Energy-saving adaptive robust control of a hydraulic manipulator using five cartridge valves with an accumulator [J].IEEE Transactions on Industrial Electronics, 2014, 61(12): 7046-7054.
XIA Dezheng, LIU Zhiqi, LIU Xiaolian.Research on energy saving about boom hydraulic circuit of hydraulic excavator [J].Hydraulics Pneumatics Seals, 2012, 32(9): 56-58.
YANG Xiaolei, DING Haigang, LI Kefeng, et al.Energy saving scheme analysis and new scheme design of boom for hydraulic excavators [J].Construction Machinery, 2018, 504(2): 51-54.
LIN T L, WANG Q F.Hydraulic accumulator-motor-generator energy regeneration system for a hybrid hydraulic excavator [J].Chinese Journal of Mechanical Engineering, 2012, 25(6): 1121-1129.
WANG T, WANG Q F.Design and analysis of compound potential energy regeneration system for hybrid hydraulic excavator [J].Journal of Systems and Control Engineering, 2012, 226(10): 1323-1334.
WANG T, WANG Q F, LIN T L.Improvement of boom control performance for hybrid hydraulic excavator with potential energy recovery [J].Automation in Construction, 2013, 30: 161-169.
KE Jian, LI Pei, YU Lanying, et al.Research on experimental system of boom energy recovery in hybrid drive excavator [J].Machine Design and Research, 2011, 27(6): 109-112.
WANG Yongjin, QUAN Long, LI Aifeng, et al.Boom lifting control scheme of large mining hydraulic excavator [J].Journal of Mechanic Engineering, 2013, 49(12): 161-166.
WANG Dapeng, TANG Ruixiang, LIN Hai, et al.Improvement to the light load quick-falling valve for the bucket of 5 m3 loader [J].Machine Tool Hydraulics, 2016, 44(8): 89-91.
GUI Shaoxiong, MA Liying, CAO Yuanwen.Common fault diagnosis and removal of TY180 bulldozer working member hydraulic system [J].Journal of Chongqing Jiaotong University(Natural Science), 2011, 30(3): 481-484.
DONG Qingjian, LI Qian, WANG Meng.Cause analysis and remedy of failed cylinder for model SD16 bulldozer [J].Construction Machinery and Equipment, 2018, 3: 39-40.
LI Xiaoxiang, LI Guopeng, WANG Shengbo, et al.Research and analysis on relevance between flow characteristics of multi-way valve and regeneration of quick-drop valve [J].Chinese Hydraulics Pneumatics, 2013, 9: 49-50.