Flow-Number Parametric Model for Multiway Valve Spool Topological Design

doi:10.7652/xjtuxb201905020

您当前的位置：

首页 >

文章列表页 >

Flow-Number Parametric Model for Multiway Valve Spool Topological Design

更新时间：2025-07-09

- Flow-Number Parametric Model for Multiway Valve Spool Topological Design
- Vol. 53, Issue 5, Pages: 149-146+186(2019)
- 作者机构：
  
  同济大学机械与能源工程学院,上海,201804
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201905020
  CLC： TH137.52
- Online First：10 May 2019，
  
  Published：2019
- 稿件说明：
移动端阅览
Flow-Number Parametric Model for Multiway Valve Spool Topological Design[J]. 2019, 53(5): 149-146+186.
DOI：

Flow-Number Parametric Model for Multiway Valve Spool Topological Design[J]. 2019, 53(5): 149-146+186. DOI： 10.7652/xjtuxb201905020.

摘要

为避免多路阀阀芯拓扑形态设计中满足多种复杂载荷条件的计算流体力学(computational fluid dynamics

CFD)仿真的庞大计算量

提出了多路阀阀芯拓扑形态设计的流量数参数模型。由于多路阀常处于饱和流量状态

故假设流量系数仅与阀芯拓扑形态和阀芯位移有关

用流量数作为表达节流槽流量控制特性的参数。首先

通过有限变量空间中的CFD仿真样本

运用统计学方法建立不同节流槽结构的流量数参数模型。然后

通过线性叠加得到阀口的流量数参数模型。最后

以20吨级液压挖掘机多路阀为研究对象

使用流量数参数模型实现了一定载荷特征与性能要求下的多路阀节流结构定制化设计。研究结果表明

流量数参数模型对复杂载荷条件下多路阀阀芯拓扑形态设计具有良好的设计精度与简便性。

Abstract

To avoid the huge calculation cost as designing multiway valve spool by computational fluid dynamics(CFD)simulations for various complicated load conditions

a flow-number parametric model for multiway valve spool topological design is proposed. Since multiway valve is always in a saturated flow status

it is assumed that flow coefficient is only related to the valve spool structure and the valve opening

and flow-number can be taken as the parameter expressing the flow control characters of grooves. Statistical method is adopted to develop flow-number parametrical models of different groove structures via samples of CFD simulations in limited design space. Then flow-number parametrical models of valve ports are developed by linear superposition. Taking 20-ton-level hydraulic excavator multiway valve as the researching object

a customized design for multiway valve structure is realized according to specific load characters and performance requirements by the flow-number parametrical model. This approach indicates that under complicated loads

the flow-number parametrical model facilitates multiway valve spool topological design with higher accuracy.

关键词

Keywords

references

姜涛, 夏明杰, 王安麟. 滑移网格法在滑阀三维瞬态流场解析的适用性分析 [J]. 同济大学学报(自然科学版), 2015, 43(10): 1575-1581.

JIANG Tao, XIA Mingjie, WANG Anlin. Applicability analysis of slide valve in 3D transient flow field analysis of sliding mesh method [J]. Journal of Tongji University(Natural Science), 2015, 43(10): 1575-1581.

AMIRANTE R, CATALANO L A, POLONI C, et al. Fluid-dynamic design optimization of hydraulic proportional directional valves [J]. Engineering Optimization, 2014, 46(10): 1295-1314.

冀宏, 傅新, 杨华勇. 几种典型液压阀口过流面积分析及计算 [J]. 机床与液压, 2003(5): 14-16.

JI Hong, FU Xin, YANG Huayong. Analysis and calculation on typical orifice areas in hydraulic valves [J]. Machine Tool Hydraulics, 2003(5): 14-16.

吕孟. 多路阀阀口面积数字化计算与分析 [J]. 建筑机械, 2015(6): 108-110.

LÜ Meng. Orifice area digital calculation and analysis of multi-way valve [J]. Construction Machinery, 2015(6): 108-110.

JEON J, HAN C, CHUNG J U, et al. Performance evaluation of a piezoactuator-based single-stage valve system subjected to high temperature [J]. Smart Materials and Structures, 2015, 24(1): 15022-15033.

姜涛, 黄伟, 王安麟. 多路换向阀换向耦合阀口节流结构拓扑设计 [J]. 西安交通大学学报, 2016, 50(8): 26-31.

JIANG Tao, HUANG Wei, WANG Anlin. Topology design method for coupling valve throttle structure of multi-way directional valves [J]. Journal of Xi'an Jiaotong University, 2016, 50(8): 26-31.

王安麟, 况龙, 张小路. 多路阀耦合节流槽结构的拓扑变量空间优化 [J]. 西安交通大学学报, 2017, 51(6): 103-109.

WANG Anlin, KUANG Long, ZHANG Xiaolu. Optimization of topological variables space for multi-way coupling groove structure [J]. Journal of Xi'an Jiaotong University, 2017, 51(6): 103-109.

杨耀祥, 王露, 李胜民, 等. 一种多路阀主阀的仿真分析研究 [J]. 液压与气动, 2013(2): 99-102.

YANG Yaoxiang, WANG Lu, LI Shengmin, et al. Simulation study of power-level valve in multi-passage valve [J]. Chinese Hydraulics Pneumatics, 2013(2): 99-102.

孙后环, 徐海涵, 贾文华. 液压阀V-U及U-U型节流槽特性研究 [J]. 液压与气动, 2012(11): 74-76.

SUN Houhuan, XU Haihan, JIA Wenhua. Characteristic research on hydraulic valves with V-U U-U notches [J]. Chinese Hydraulics Pneumatics, 2012(11): 74-76.

官通, 郭勇, 尹升, 等. 小型液压挖掘机动臂联阀口的流量特性 [J]. 机械设计与研究, 2014, 30(2): 115-118.

GUAN Tong, GUO Yong, YIN Sheng, et al. The research on flow characteristic of orifice in the boom circuit of mini-hydraulic excavator [J]. Machine Design and Research, 2014, 30(2): 115-118.

王安麟, 况龙, 张小路. 换向滑阀组合节流槽流量系数研究 [J]. 西安交通大学学报, 2018, 52(2): 110-117.

WANG Anlin, KUANG Long, ZHANG Xiaolu. A study on flow coefficient of combined throttling groove in spool valves [J]. Journal of Xi'an Jiaotong University, 2018, 52(2): 110-117.

兰秋华, 李维嘉, 吴思, 等. 基于流场仿真的滑阀节流口流量特性研究 [J]. 液压与气动, 2014(5): 75-78.

LAN Qiuhua, LI Weijia, WU Si, et al. Flow characteristics of throttling groove in spool valve core based on simulation of flow field [J]. Chinese Hydraulics Pneumatics, 2014(5): 75-78.

江涛, 李维嘉, 彭勇, 等. 起重机液压换向阀建模及仿真研究 [J]. 计算机仿真, 2014, 31(3): 261-265.

JIANG Tao, LI Weijia, PENG Yong, et al. Modeling and simulation study on hydraulic directional valve of crane [J]. Computer Simulation, 2014, 31(3): 261-265.

王安麟, 吴小锋, 周成林, 等. 基于CFD的液压滑阀多学科优化设计 [J]. 上海交通大学学报, 2010, 44(12): 1767-1772.

WANG Anlin, WU Xiaofeng, ZHOU Chenglin, et al. Multidisciplinary optimization of a hydraulic slide valve based on CFD [J]. Journal of Shanghai Jiaotong University, 2010, 44(12): 1767-1772.

LI Xiaotian, WANG Anlin. Definitions of causality in bond graph model for efficient simulation mechanism [J]. Mechanism and Machine Theory, 2014, 80: 112-124.

王安麟, 石世宁. 基于响应面法的中型挖掘机模型参数标定 [J]. 机械设计, 2013, 30(7): 59-63.

WANG Anlin, SHI Shining. Parameter calibration for medium excavator model based on response surface methodology [J]. Journal of Machine Design, 2013, 30(7): 59-63.

姜涛, 付志翼, 王安麟. 一种非平稳随机循环工况下的参数化载荷模型 [J]. 东北大学学报(自然科学版), 2016, 37(6): 845-850.

JIANG Tao, FU Zhiyi, WANG Anlin. Parameterized load model under non-stationary random cyclic conditions [J]. Journal of Northeastern University(Natural Science), 2016, 37(6): 845-850.

王安麟, 石世宁, 李晓田. 挖掘机动态性能试验及其数据的小波处理方法 [J]. 同济大学学报(自然科学版), 2014, 42(1): 115-123.

WANG Anlin, SHI Shining, LI Xiaotian. Dynamic performance test and wavelet processing method for non-stationary random data of hydraulic excavator [J]. Journal of Tongji University(Natural Science), 2014, 42(1): 115-123.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Energy Efficiency Optimization of the Cryogenic Air Separation Process for Electronic-Grade Ultra Pure Nitrogen

Review of the Application of EBSILON Software in Combined Heat and Power System Optimization

Effects of Steam Addition on the Swirl Combustion and Emission Characteristics of Cracked Ammonia

Knowledge Graph Representation Learning Driven by Semantic Discrimination and Subgraph Integration

Sensitivity Analysis of Foil Geometrical Parameters for the Third-Generation CO2 Gas Foil Bearings Based on Design of Experiments Method

Related Author

No data

Related Institution

No data

⁰