Study on Fatigue Reliability Model and Evaluation Method of Complex Structures

doi:10.7652/xjtuxb201807018

您当前的位置：

首页 >

文章列表页 >

Study on Fatigue Reliability Model and Evaluation Method of Complex Structures

更新时间：2025-07-09

- Study on Fatigue Reliability Model and Evaluation Method of Complex Structures
- Vol. 52, Issue 7, Pages: 123-129(2018)
- 作者机构：
  
  东北大学航空动力装备振动及控制教育部重点实验室,沈阳,110819
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201807018
  CLC： O346.1;O346.2;TB114.3
- Online First：10 July 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
Study on Fatigue Reliability Model and Evaluation Method of Complex Structures[J]. 2018, 52(7): 123-129.
DOI：

Study on Fatigue Reliability Model and Evaluation Method of Complex Structures[J]. 2018, 52(7): 123-129. DOI： 10.7652/xjtuxb201807018.

摘要

为了评估复杂结构件在随机载荷作用下的疲劳可靠性

将含有多个疲劳细节的复杂结构件看作由多个只含有单一疲劳细节的单元构成的串联系统

在不做各个疲劳细节失效独立假设的前提下

根据疲劳可靠性异量纲干涉模型

提出了一种从系统层级上直接建立的复杂结构件疲劳可靠性模型。以某型列车枕梁为例

展示了随机载荷历程下含多个疲劳细节结构的疲劳可靠性预测方法及流程

并对其疲劳可靠性进行了分析。结果表明:在随机载荷作用下

提出的模型考虑了复杂结构件中疲劳细节之间失效的统计相关性

计算出的列车枕梁服役30年后的可靠度约为0.90

相比之下

传统的系统可靠性模型计算的可靠度偏于保守。

Abstract

To evaluate the fatigue reliability of complex structures under random loads

a complex structure was treated as a series system composed of many units

each containing only a fatigue site

and a fatigue reliability model for complex structures was established based on the dissimilar-dimension interference model of fatigue reliability. The model was directly built at the system level without assuming independence of failures. Furthermore

the fatigue reliability evaluation of a train bolster was taken as an example to display the method and the process of fatigue reliability evaluation for complex structures. The results indicate that the fatigue reliability calculated by this new method considering the statistical correlation of failure among multiple fatigue sites in a complex structure under random loads is less conservative than using traditional methods

and the fatigue reliability of the bolster is about 0.90 in 30 years of service.

关键词

Keywords

references

KECECIOGLU D. Reliability analysis of mechanical components and systems [J]. Nuclear Engineering and Design, 1972, 19(2): 259-290.

SUNDARARAJAN C, WITT F J. Stress-strength interference methods [M]. New York, USA: Springer, 1995: 8-26.

HE Z, LOH H T, XIE M. A two-dimensional probability model for evaluating reliability of piezoelectric micro-actuators [J]. International Journal of Fatigue, 2007, 29(2): 245-253.

NI K, MAHADEVAN S. Strain-based probabilistic fatigue life prediction of spot-welded joints [J]. International Journal of Fatigue, 2004, 26(7): 763-772.

CHEN D. A new approach to the estimation of fatigue reliability at a single stress level [J]. Reliability Engineering and System Safety, 1991, 33(1): 101-113.

MURTY A S R, GUPTA U C, KRISHNA A R. A new approach to fatigue strength distribution for fatigue reliability evaluation [J]. International Journal of Fatigue, 1995, 17(2): 85-89.

PETRYNA Y S, PFANNER D, STANGENBERG F, et al. Reliability of reinforced concrete structures under fatigue [J]. Reliability Engineering and System Safety, 2002, 77(3): 253-261.

KARADENIZ H. Uncertainty modeling in the fatigue reliability calculation of offshore structures [J]. Reliability Engineering and System Safety, 2002, 74(3): 323-335.

XIE L, ZHOU J, WANG Y, et al. Load-strength order statistics interference models for system reliability evaluation [J]. International Journal of Performability Engineering, 2005, 1(1): 23-36.

罗毅, 高镇同. 疲劳寿命可靠性分析模型 [J]. 机械强度, 1994(3): 64-66.

LUO Yi, GAO Zhentong. Fatigue life reliability analysis model [J]. Mechanical Strength, 1994(3): 64-66.

谢里阳, 王正. 随机恒幅循环载荷疲劳可靠度异量纲干涉模型 [J]. 机械工程学报, 2008, 44(1): 1-6.

XIE Liyang, WANG Zheng. Dissimilar-dimension interference model of fatigue reliability under uncertain cyclic load [J]. Chinese Journal of Mechanical Engineering, 2008, 44(1): 1-6.

DE CASTRO P M S T, DE MATOS P F P, MOREIRA P M G P, et al. An overview on fatigue analysis of aeronautical structural details: open hole, single rivet lap-joint, and lap-joint panel [J]. Materials Science and Engineering: A, 2007, 468/469/470(1): 144-157.

SILVA L F M, GONCALVES J P M, OLIVEIRA F M F, et al. Multiple-site damage in riveted lap-joints: experimental simulation and finite element prediction [J]. International Journal of Fatigue, 2000, 22(4): 319-338.

CHERRY M C, MALL S, HEINIMANN B, et al. Residual strength of unstiffened aluminum panels with multiple site damage [J]. Engineering Fracture Mechanics, 1997, 57(6): 701-713.

SHI P, MAHADEVAN S. Corrosion fatigue and multiple site damage reliability analysis [J]. International Journal of Fatigue, 2003, 25(6): 457-469.

王卫国, 卿华, 杜文军. 危险部位数目对轮盘低循环疲劳寿命的影响研究 [J]. 燃气涡轮试验与研究, 2007, 20(3): 11-14.

WANG Weiguo, QING Hua, DU Wenjun. Effect of number of critical features on disk LCF life [J]. Gas Turbine Experiment and Research, 2007, 20(3): 11-14.

谢里阳, 王正, 周金宇. 机械可靠性基本理论与方法 [M]. 2版. 北京: 科学出版社, 2012: 120-133.

钱文学. 某型航空发动机低压压气机轮盘疲劳可靠性分析 [D]. 沈阳: 东北大学, 2006: 58-68.

钱文学, 谢里阳, 尹晓伟. 载荷相关多薄弱部位零部件可靠度建模与分析 [J]. 机械工程学报, 2010, 46(6): 182-187.

QIAN Wenxue, XIE Liyang, YIN Xiaowen. Reliability modeling and assessment of load dependent multiple weak site parts [J]. Journal of Mechanical Engineering, 2010, 46(6): 182-187.

XIE L, WANG Z, LIN W. System fatigue reliability modelling under stochastic cyclic load [J]. International Journal of Reliability and Safety, 2008, 2(4): 357-367.

ROBERT C P, CASELLA G. Monte Carlo statistical methods [M]. 2nd ed. New York, USA: Springer, 2005: 88-215.

SCHIJVE J. Fatigue of structures and materials [M]. 2nd ed. Dordrecht, Germany: Springer, 2009: 249-255.

Railway applications: structural requirements of railway vehicle bodies: BS EN12663-1 [S]. Brussels, Belgium: European Committee for Standardization, 2010.

何如. 高速列车铝合金焊接接头疲劳性能研究 [D]. 北京: 北京交通大学, 2008: 28-30.

SHAO Jun. Mathematical statistics [M]. 2nd ed. Beijing, China: World Book Publishing Company, 2009: 193-200.

孟文俊,张四聪,淡紫嫣,等.按类统计方法在滚动轴承可视化可靠性动态评估中的应用.2018,52(6):23-29.[doi:10.7652/xjtuxb201806004]

白恩军,谢里阳,胡杰鑫.考虑啮合齿对失效相关性的齿轮系统可靠性评估.2018,52(5):38-43.[doi:10.7652/xjtuxb 201805005]

王智明,任丽娜,段红燕,等.耐用度服从三参数Weibull分布的机床刀具在变加工条件下的可靠性评估.2018,52(4):77-83.[doi:10.7652/xjtuxb201804011]

杨培林,侯翌,徐凯,等.利用形式化方法的机电系统概率失效模式及影响分析.2018,52(1):1-7.[doi:10.7652/xjtuxb 201801001]

周晓松,梅志远,张焱冰.夹芯复合材料T型接头弯曲疲劳损伤机制及剩余强度试验研究.2017,51(9):125-130.[doi:10.7652/xjtuxb201709018]

付曦,张俊红,寇海军,等.复杂载荷下轴流压气机叶片疲劳损伤数值研究.2017,51(5):149-155.[doi:10.7652/xjtuxb 201705021]

吴波,杨利,金绍江,等.仿生活塞疲劳寿命预测与回归设计.2016,50(5):72-80.[doi:10.7652/xjtuxb201605011]

罗明军,侯之超,宋立新,等.后扭力梁轴头载荷谱仿真及疲劳寿命预测.2013,47(9):106-111.[doi:10.7652/xjtuxb2013 09018]

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Methodology and Application of Fatigue Reliability Assessment Fillet Welds at the Bottom of Molten Salt Tanks

Gear Trains Reliability Estimation with Failure-Dependence of Meshing Tooth-Pairs

Review of the Application of EBSILON Software in Combined Heat and Power System Optimization

Numerical Simulation of the Energy Conversion Process in Thermoacoustic Engines with Different Stack Materials

Diffusion Characteristics and Influencing Factors in Case of Hydrogen Leakage from Fuel Cell Vehicles Running in Tunnels

Related Author

YU Bing

HU Haijun

XIE Guoshan

LI Yongquan

LI Xiufeng

白恩军 1

谢里阳 1

Related Institution

School of Chemical Engineering and Technology, Xi'an Jiaotong University

China Special Equipment Inspection and Research Institute

Technology Innovation Center of Risk Prevention and Control of Refining and Chemical Equipment, State Administration for Market Regulation

东北大学机械工程与自动化学院

东北大学航空动力装备振动及控制教育部重点实验室

⁰