Experimental Research on the Cooling Characteristics by Swirling Impinging Jet from a Nozzle with Internal Thread

doi:10.7652/xjtuxb201801002

您当前的位置：

首页 >

文章列表页 >

Experimental Research on the Cooling Characteristics by Swirling Impinging Jet from a Nozzle with Internal Thread

更新时间：2025-07-09

- Experimental Research on the Cooling Characteristics by Swirling Impinging Jet from a Nozzle with Internal Thread
- Vol. 52, Issue 1, Pages: 8-13+76(2018)
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201801002
  CLC： TK124
- Online First：10 January 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
Experimental Research on the Cooling Characteristics by Swirling Impinging Jet from a Nozzle with Internal Thread[J]. 2018, 52(1): 8-13+76.
DOI：

Experimental Research on the Cooling Characteristics by Swirling Impinging Jet from a Nozzle with Internal Thread[J]. 2018, 52(1): 8-13+76. DOI： 10.7652/xjtuxb201801002.

摘要

为了实现均匀高效的射流冲击冷却

提出了一种新型旋流射流冷却结构

即圆孔内壁等间隔设有4条类似螺纹孔的螺旋槽道。通过实验研究了该喷嘴在不同螺旋角(0°、15°、30°、45°)、雷诺数Re(6 000～30 000)、冲击距离(1～8倍当量直径)等参数下对靶面换热特性的影响

揭示了该喷嘴冲击射流靶面的换热规律。实验结果表明

增大螺旋槽道角度

靶面的换热系数有所增强。与普通圆孔及无旋多槽道冲击射流相比

同工况下带有一定螺旋角的旋转射流可有效提高靶面的整体换热系数。在2倍和4倍当量直径的冲击距离下

45°类螺纹孔旋流射流换热的驻点努塞尔数Nu比普通圆孔射流分别高出7.4%和11.4%; 靶面Nu与Re成非线性正比关系

在较高Re下Nu在靶面中心点以外0.7倍当量直径处出现峰值; 随着冲击距离的增大

旋流对靶面冲击换热的作用效果减弱

乃至消失。

Abstract

To achieve high-efficiency cooling performance and good uniformity of impinging jet

a new type of nozzle structure is proposed. The new nozzle has four circumferential spiral channels symmetrically distributed inside a normal smooth nozzle

similar to an internal threads. The influences of this nozzle on heat transfer characteristics of impinged surface under different helix angles(0°

15°

30°

45°)

Reynolds numbers(6 000-30 000)and impact distances(1 to 8 times the equivalent diameter)were studied experimentally. And the heat transfer rule of the impinged surface was revealed. The experimental results indicate that a big helix angle can enhance slightly the heat transfer coefficient on the impinged surface. Compared with the conventional impinging jet from the smooth circular hole and the hole with four straight channels

the swirling impinging jets from the designed nozzles are effective to enhance the overall heat transfer coefficient on the impinged surface under the same conditions. At the impact distances of 2 times and 4 times the equivalent diameter

Nusselt numbers of the 45-degree thread hole are 7.4% and 11.4% higher than that of conventional impinging jet at the stagnation area

respectively. The heat transfer coefficient on the impinged surface is non-linearly increased with the increase of Reynolds number. The maximal value of Nusselt number under a relative large Reynolds number occurs at the location of 0.7 times the equivalent diameter outside the stagnation point. With the increase of the impact distance

the effect of the swirling flow on the target surface heat transfer is weakened or even disappeared.

关键词

Keywords

references

天野良一, 蒙特·桑顿. 燃气轮机冲击冷却技术 [M]. 高杰, 等译. 北京: 国防工业出版社, 2016: 4.

SHARIF M A R. Numerical investigation of round turbulent swirling jet impingement heat transfer from a hot surface [J]. Computational Thermal Sciences, 2016, 8(6): 489-507.

YANG W P, ZHANG J. Simulation of methane partially premixed turbulent swirling jet flame [J]. Numerical Heat Transfer: Part A Applications, 2016, 69(10): 1136-1149.

KUMAR S S, HINDASAGERI V, PRABHU S V. Local heat transfer distribution on a flat plate impinged by a swirling jet generated by a twisted tape [J]. International Journal of Thermal Sciences, 2017, 111: 351-368.

HUANG L, El-GENK M S. Heat transfer and flow visualization experiments of swirling multi-channel and conventional impinging jets [J]. International Journal of Heat Mass Transfer, 1998, 41(3): 583-600.

BAKIRCI K, BILEN K. Visualization of heat transfer for impinging swirl flow [J]. Experimental Thermal and Fluid Science, 2007, 32: 182-191.

BROWN K J, PRESOONS T, MURRAY D B. Heat transfer characteristics of swirling impinging jets [C]∥ASME 14th International Mechanical Engineering Congress Exposition. New York, USA: ASME, 2010: 1879-1889.

FENOT M, DORIGNAC E, LALIZEL G. Heat transfer and flow structure of a multichannel impinging jet [J]. International Journal of Thermal Sciences, 2015, 90: 323-338.

EIAMSA-ARD S, NANAN K, WONG C K. Heat transfer visualization of co/counter-dual swirling impinging jets by thermochromic liquid crystal method [J]. International Journal of Heat and Mass Transfer, 2015, 86: 600-621.

YANG H Q, KIM T, LU T J, et al. Flow structure, wall pressure and heat transfer characteristics of impinging annular jet with/without steady swirling [J]. International Journal of Heat and Mass Transfer, 2010, 53: 4092-4100.

NUNTADUSIT C, WAE H M, BUNYAJITRADULYA A, et al. Visualization of flow and heat transfer characteristics for swirling impinging jet [J]. International Communications in Heat and Mass Transfer, 2012, 39: 640-648.

NUNTADUSIT C, WAE H M, BUNYAJITRADULYA A, et al. Heat transfer enhancement by multiple swirling impinging jets with twisted tape swirl generators [J]. International Communications in Heat and Mass Transfer, 2012, 39: 102-107.

陈玉阳, 苑中显, 马重芳, 等. 旋转射流冲击换热液晶显示实验研究 [J]. 工程热物理学报, 2003, 24(4): 646-648.

CHENG Yuyang, YUAN Zhongxian, MA Zhongfang, et al. Experimental study of heat transfer of swirling jet impingement with liquid crystal technique [J]. Journal of Engineering Thermophysics, 2003, 24(4): 646-648.

HOFMANN H M, KIND M, MARTIN H. Measurements on steady state heat transfer and flow structure and new correlations for heat and mass transfer in submerged impinging jets [J]. International Journal of Heat Mass Transfer, 2007, 50(19): 3957-3965.

IANIRO A, CARDONE G. Heat transfer rate and uniformity in multichannel swirling impinging jets [J]. Applied Thermal Engineering, 2012, 49: 89-98.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical Study on Deflected Internal Flow and Heat Transfer and Cooling Characteristics of Curved Double-Wall Structures with Pin-Fins

Numerical Investigation of Internal and External Flow Interaction and Overall Cooling Characteristics of Curvature Double-Wall Structures

Numerical Study on the Deflected Flow and Heat Transfer and Cooling Characteristics of Curved Double-Wall Structures with Pin-Fins

Optimization and Validation of Jet Hole Shapes for Jet Impingement Cooling in Gas Turbines

Research on One-Dimensional Flow Network Calculation Method for Impingement Cooling of Turbine Blades under Suction Effect of Air Film

Related Author

LI Jun

LI Zhigang

ZHANG Kaiyuan

BAI Bo

QUAN Shuaiyu

ZHANG Kaiyuan

LI Zhiyu

LI Zhigang

Related Institution

西安交通大学叶轮机械研究所，710049，西安Institute of Turbomachinery, Xi'an Jiaotong University, Xi'an 710049, China

School of Energy and Power Engineering, Xi'an Jiaotong University

Institute of Turbomachinery, Xi’an Jiaotong University

Shanghai Turbine Works Co., Ltd.

西安交通大学能源与动力工程学院

⁰