Assessment Method of Early Damage Severity for Rolling Bearing Based on the Improved HVD and Lempel-Ziv Index[J]. 2017, 51(6): 8-13.
DOI:
Assessment Method of Early Damage Severity for Rolling Bearing Based on the Improved HVD and Lempel-Ziv Index[J]. 2017, 51(6): 8-13.DOI: 10.7652/xjtuxb201706002.
Assessment Method of Early Damage Severity for Rolling Bearing Based on the Improved HVD and Lempel-Ziv Index
A fault severity assessment method is proposed to solve the problem that early fault signals of rolling bearings are weak and difficult to be quantitatively measured
and the method uses Hilbert vibration decomposition(HVD)combined with Lempel-Ziv complexity(LZC). HVD is adopted to decompose fault signals of rolling bearings into initial HVD components ordered from large to small and with different instantaneous frequencies. The best initial HVD component is selected based on the kurtosis index analysis
and then the component is used to reconstruct the fault signals. The normalized LZC index of the reconstructed signals is calculated using the mean symbolic method. The mirror extension method is adopted to deal with endpoint effect of HVD. Simulation results show that the mirror extension method effectively improves the endpoint effect of HVD
and the decomposition accuracy is obviously increased. The HVD-LZC method is used to analyze fault signals of the inner and outer rings of rolling bearings with different level of defect severity
and the results show that the method eliminates the non-stationary and non-linear interferences. As a result
the main fault vibration modes are extracted and the HVD-LZC characteristic intervals for different damage state are estimated; The characteristics of HVD-LZC for three kinds of fault severities of rolling bearing are modeled using the GA-SVM based on RBF kernel. Experimental results show that the HVD-LZC method recognizes different levels of fault severity of the inner and outer rings of rolling bearings. Hence
this study provides an effective fault severity assessment method for rolling bearings.
MA Zaichao, WEN Guangrui, ZHANG Henghui, et al. EEMD-PCA method for rotor fault identification in a centrifugal compressor [J]. Vibration and Shock, 2016, 35(4): 148-155.
HUANG N E, SHEN Z, LONG S R, et al. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis [J]. Proceedings of the Royal Society: A Mathematical Physical and Engineering Science, 1998, 454: 903-995.
YU D J, CHENG J S, YANG Y. Application of EMD method and Hilbert spectrum to the fault diagnosis of roller bearings [J]. Mechanical System and Signal Processing, 2005, 19(2): 259-270.
ZHU K H, SONG X G, XUE D X. Incipient fault diagnosis of roller bearings using empirical mode decomposition and correlation coefficient [J]. Journal of Vibroengineering, 2013, 15(2): 597-603.
RATO R T, ORTIGUEIRA M D, BATISTA A G. On the HHT, its problems, and some solutions [J]. Mechanical System and Signal Processing, 2008, 22: 1374-1394.
FELDMAN M. Time-varying vibration decomposition and analysis based on the Hilbert transform [J]. Journal of Sound and Vibration, 2006, 295(3/4/5): 518-530.
SHEN Yue, LIU Guohai, LIU Hui. Transient and steady power harmonic analysis based on Hilbert vibration decomposition method [J]. Journal of Data Acquisition and Processing, 2011, 26(1): 117-122.
TANG Youfu, LIU Shulin, LIU Yinghui, et al. Fault diagnosis based on nonlinear complexity measure for reciprocating compressor [J]. Chinese Journal of Mechanical Engineering, 2012, 48(3): 102-107.
DOU Dongyang, ZHAO Yingkai. Fault severity assessment for rolling element bearings on EMD and Lempel-Ziv index [J]. Vibration and Shock, 2010, 29(3): 5-8.
ZHANG Chao, CHEN Jianjun. Fault severity assessment for rolling element bearings based on LMD and Lempel-Ziv index [J]. Vibration and Shock, 2012, 31(16): 77-82.
KEDADOUCHE M, THOMAS M, TAHAN A. A comparative study between empirical wavelet transforms and empirical mode decomposition methods: application to bearing defect diagnosis [J]. Mechanical Systems and Signal Processing, 2016, 81: 88-107.
The case western reserve university bearing data center [EB/OL].(2012-11-07)[2013-12-01]. http: ∥csegroups.case.edu/Bearing Data Center/pages/download-data-file.
HUANG C L, WANG C J. A GA-based feature selection and parameters optimization for support vector machines [J]. Expert Systems with Applications, 2006, 31(2): 231-240.