To reveal the influence of pipe network system characteristics on the surge of centrifugal compressor
a correlation model including temperature item is constructed. This correlation model couples the effect of plenum chamber to the boundary condition of the compressor outlet
thus the numerical simulation of the compressor system from steady state to surge state is realized. The flow fields in flow passage and vaneless diffuser of a centrifugal compressor are simulated in transient state
and the fluctuations of pressure and mass flow rate in the compressor outlet are obtained under surge condition over the simulation period. The effects of piping system characteristics including piping capacity and outlet mass flow rate on surge are analyzed. Simulation shows that the model is able to capture the changes of the parameters in compressor outlet under surge condition. With increasing pipe network capacity or decreasing outlet mass flow rate
the amplitudes of the mass flow rate and total pressure in compressor outlet increase
and working condition turns into surge. The influence of the pipe network capacity on the stall frequency is obvious
while the change of the mass flow rate in pipe network outlet slightly affects the stall frequency.
关键词
Keywords
references
徐忠. 离心式压缩机原理 [M]. 北京: 机械工业出版社, 1990: 2-5.
王鑫. 论离心压缩机防喘振控制与管网的关系 [J]. 才智, 2009(28): 64-65.
CUMPSTY N A. Compressor aerodynamics [M]. New York, USA: Longaman Publishing Group, 1989: 362-364.
NIAZI S, STEIN A, SANKAR L N. Numerical studies of stall and surge alleviation in a high-speed transonic fan rotor: 2000-2025 [R]. Reston, VA, USA: AIAA, 2000.
GUO Qiang, ZHU Xiaocheng, DU Zhaohui, et al. Numerical simulation of rotating stall inside high speed centrifugal compressor using entire geometry mesh [J]. Chinese Journal of Mechanical Engineering, 2009, 45(6): 284-289.
WANG Wei, WANG Tong, ZHANG Nan, et al. Numerical analysis of internal flow field on a centrifugal impeller approaching to stall [J]. Compressor Blower Fan Technology, 2013(3): 9-14, 29.
YANG Ce, ZHAO Ben, MA C C, et al. Effect of different geometrical inlet pipes on a high speed centrifugal compressor: GT2013-94254 [R]. New York, USA: ASME, 2013.