In view of that the traditional hydraulic pump is difficult to output many kinds of flow and pressure
a new type of cam-rotor double-stator vane pump is put forward
which combines the structure of cam-rotor vane pump with the thought of double-stator. This pump contains a cam-rotor
an outer-stator and an inner-stator to set two pumps in one case. The flows of two pumps are proportional so as to realize to output different pressures and flows or to drive hydraulic systems with different pressures and flows to work at the same time. Analyzing the internal structure of cam-rotor double-stator vane pump
the theoretical flow calculation formulas of inner and outer pumps under different combinations are summed up and the main internal leakage paths are obtained. The comparison of the three kinds of working state i.e. the supply by inner pump alone
the supply by outer pump alone and the supply by both inner and outer pumps
shows that the volumetric efficiency of the mentioned pumps decreases with the increasing load pressure. Under the same output pressure
the volumetric efficiency of inner pump working alone is the lowest
while the volumetric efficiency of outer pump working alone is the highest.
关键词
Keywords
references
闻德生. 液压元件的创新与发展 [M]. 北京: 航空工业出版社, 2009: 375-383.
王忠楗. TYB型凸轮转子叶片泵 [J]. 机床与液压, 1982(6): 11-31.
WANG Zhongjian. Cam-rotor vane pump type TYB [J]. Machine Tool Hydraulics, 1982(6): 11-31.
WEN Desheng, ZHENG Jie, ZHENG Zhenquan, et al. Theory analyses of double stator symmetrical type multi-pump and multi-speed motor [J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(7): 321-324.
WEN Desheng, ZHANG Yong, WANG Zhili, et al. Rotating speed and torque of triple-acting multi-pump and multi-motor [J]. Journal of Xi'an Jiaotong University, 2011, 45(3): 81-84.
LIU Yishan, WEN Desheng, DU Xiaojie. Introduction of multi-pumps and multi-motors hydraulic transmission system [J]. Hydraulics Pneumatics Seals, 2012(2): 73-76.