A method that combines the finite element method and Newton-Raphson iterative method is applied to study the effects of bit pattern media(BPM)on the static characteristics of slider in the hard disk drive. The static characteristics of sliders with different structures and geometry dimensions of BPM such as pitch angle
roll angle
air bearing film thickness
pressure and load capacity are calculated. The numerical results show that the bit shape and its dimension parameters have significant effects on the static performances of the slider. Compared with the smooth disk
when the slider is flying over the bit pattern media
the pressure distribution in the central region which is close to its read/write head shows a discretization feature. The gas-film load capacity and minimum film thickness of the slider gradually decrease as the bit height increases
while the changes of other characteristics are closely related with the bit distribution. Moreover
a comparison with a cylindrical bit pattern media shows that the smaller roll angle may produce lager maximum film pressure
load capacity and minimum film thickness
and that the static characteristics of the slider flying over cuboidal bit pattern media are better than those over cylindrical bit pattern media. These results are of great significance for the design of structure and geometry parameters of bit pattern media.
关键词
Keywords
references
SOENO Y, MORIYA M, ITO K, et al. Feasibility of discrete track perpendicular media for high track density recording [J]. IEEE Transactions on Magnetics, 2003, 39(4): 1967-1971.
WACHENSCHWANZ D, JIANG W, RODDICK E, et al. Design of a manufacturable discrete track recording medium [J]. IEEE Transactions on Magnetics, 2005, 41(2): 670-675.
ZHONG Zhiyong, JING Yulan, CHEN Hongyou, et al. Patterned magnetic recording technology [J]. China Mediatech, 2004(5): 24-27.
ALBRECHT T R, ARORA H, AYANOOR-VITIKKATE V, et al. Bit patterned magnetic recording: theory, media fabrication, and recording performance [J]. IEEE Transactions on Magnetics, 2015, 51(5): 1-44.
ALBRECHT T R, BEDAU D, DOBISZ E, et al. Bit patterned media at 1 Tdot/in2 and beyond [J]. IEEE Transactions on Magnetics, 2013, 49(2): 773-778.
HWANG C C, FUNG R F, YANG R F, et al. A new modified Reynolds equation for ultrathin film gas lubrication [J]. IEEE Transactions on Magnetics, 1996, 32(2): 344-347.
HU Y, BOGY D B. Solution of the rarefied gas lubrication equation using an additive correction based multigrid control volume method [J]. ASME Journal of Tribology, 1998, 120(1): 280-288.
WANG Hongzhi, HUNAG Ping, MENG Yonggang, et al. Calculation and analysis of air bearing performance for magnetic head/disks [J]. Tribology, 2006, 26(4): 358-361.
SHI Baojun, JI Jiadong, YANG Tingyi, et al. Effects of disk velocity and accommodation coefficients on static characteristics of air bearing films in hard disk drives [J]. Journal of Mechanical Engineering, 2012, 48(23): 95-101.
DUWENSEE M, SUZUKI S, LIN J, et al. Air bearing simulation of discrete track recording media [J]. IEEE Transactions on Magnetics, 2006, 42(10): 2489-2491.
DUWENSEE M, SUZUKI S, LIN J, et al. Simulation of the head disk interface for discrete track media [J]. Microsystem Technologies, 2007, 13(8): 1023-1030.
LI Hui, ZHENG Hao, YOON Y, et al. Air bearing simulation for bit patterned media [J]. Tribology Letters, 2009, 33: 199-204.
LI Hui, TALKE F E. Numerical simulation of the head/disk interface for bit patterned media [J]. IEEE Transactions on Magnetics, 2009, 45(11): 4984-4989.
ZHANG Yanrui, MENG Yonggang. Gas lubrication analysis of three dimensional micro scale gas slider bearings with bumps based on continuum and discrete models [J]. Tribology, 2011, 31(4): 397-407.
DUWENSEE M. Numerical and experimental investigation of the head disk interface [D]. San Diego, CA, USA: University of California, 2007.