Numerical Investigations on Flow and Heat Transfer Characteristics of Transonic Turbine Blade Tips[J]. 2016, 50(4): 147-152.
DOI:
Numerical Investigations on Flow and Heat Transfer Characteristics of Transonic Turbine Blade Tips[J]. 2016, 50(4): 147-152.DOI: 10.7652/xjtuxb201604022.
Numerical Investigations on Flow and Heat Transfer Characteristics of Transonic Turbine Blade Tips
The three-dimensional steady Reynolds-Averaged Navier-Stokes(RANS)equation and the Spalart-Allmaras turbulence model are used to investigate the high speed over-tip leakage flow in a transonic turbine stage. Moreover
the influence of inlet turbulence intensity on heat transfer characteristics of top flows is investigated. The turbulence model is validated by a comparison with experimental data. Numerical results show that the blade tip attains the maximum heat transfer coefficient and the tip leakage flow is subsonic(0.3<Ma<0.8)when the tip clearance is small(s=0.188%L). When the blade tip clearance increases to 0.75% of the moving blade height(L)
the supersonic region enlarges towards the leading edge. The heat transfer coefficient on blade tip increases firstly
and then decreases as the tip clearance height increases. The minimum heat transfer coefficient on blade tip is obtained in the case s=0.75%L
and the leakage flow is supersonic(1.0<Ma<1.3)in the clearance gap. The heat transfer coefficient near the leading edge is significantly affected by the motion of the horse vortex with the increase of tip clearance height. Inlet turbulence intensity has little effect on the blade tip heat transfer performance due to the sharp acceleration of the leakage flow. However
it is observed that the cross-passage secondary flow near the leading edge is weakened with high inlet turbulence intensity.
关键词
Keywords
references
HAN J C, DUTTA S, EKKAD S. Gas turbine heat transfer and cooling technology [M]. Boca Raton, USA: CRC Press, 2012.
BUNKER R S. Axial turbine blade tips: function, design, and durability [J]. Journal of Propulsion and Power, 2006, 22(2): 271-285.
WHEELER A P S, ATKINS N R, HE L. Turbine blade tip heat transfer in low speed and high speed flows [J]. ASME Journal of Turbomachinery, 2011, 133(4): 041025.
KWAK J S, HAN J C. Heat transfer coefficient on a gas turbine blade tip and near tip regions [C]∥Proceedings of 8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference. Reston, VA, USA: AIAA, 2002: 3012.
ZHANG Q, O'DOWD D O, HE L, et al. Overtip shock wave structure and its impact on turbine blade tip heat transfer [J]. ASME Journal of Turbomachinery, 2011, 133(4): 041001.
WHEELER A P S, KORAKIARITIS T, BANNEHEKE S. Tip leakage losses in subsonic and transonic blade-rows [C]∥Proceedings of ASME Turbo Expo 2011. New York, USA: ASME, 2011: GT2011 45798.
ZHANG Q, HE L. Tip-shaping for HP turbine blade aero-thermal performance management [C]∥Proceedings of ASME Turbo Expo 2011. New York, USA: ASME, 2012: GT2012-68290.
YANG Lin, ZENG Jun, TAN Hongchuan, et al. Numerical study on flow structure and loss of large expansion ratio transonic turbine [J]. Journal of Propulsion Technology, 2014, 35(5): 632-640.
DE MAESSCHALCK C, LAVAGNOLI S, PANIAGUA G. Blade tip carving effects on the aerothermal performance of a transonic turbine [J]. ASME Journal of Turbomachinery, 2015, 137(2): 021005.
LAVAGNOLI S, DE MAESSCHALCK C, PANIAGUA G. Analysis of the unsteady overtip casing heat transfer in a high speed turbine [J]. ASME Journal of Turbomachinery, 2013, 135(3): 031027-1-12.
ROBERT D, THULIN D C, IRWIN D. Energy efficient engine high-pressure turbine detailed design report, NASA-CR-165608[R]. Cleveland, OH, USA: National Aeronautics and Space Administration, 1984.
ZHOU C. Aerothermal performance of different tips in transonic turbine cascade with end-wall motion [J]. AIAA Journal of Propulsion and Power, 2014, 30(5): 1316-11327.
ZHANG Q, HE L. Overtip choking and its implications on turbine blade-tip aerodynamic performance [J]. AIAA Journal of Propulsion and Power, 2011, 27(5): 1008-1004.
Study of the Mechanism of Electrostatic Accumulation and Current Density Distribution Characteristics During Liquid Hydrogen Pipeline Transportation
Numerical Simulation of Space Charge Distribution Characteristics of Polyimide Materials under X-Ray Irradiation
Numerical Simulation Study on Geothermal Extraction Characteristics of Supercritical CO2 in Heterogeneous Fractures
Action Mechanism of Heat Transfer between the Working Medium and the Impeller on Aerodynamic Performance and Flow Characteristics of Radial Inflow Turbines with Supercritical Carbon Dioxide
Analysis of the Attached Vortex Model for the Flow Characteristics of Wing Near-Field Wakes
Related Author
SUN Wenhao
LIU Hongbao
WANG Lei
QING Ziyou
LI Zhuolun
MA Yuan
LI Yanzhong
ZHONG Hui
Related Institution
School of Energy and Power Engineering,Xi’an Jiaotong University
Aerospace System Engineering Shanghai
School of Electrical Engineering,Xi’an Jiaotong University
Northwest Institute of Nuclear Technology
Institute of Electronic Engineering,China Academy of Engineering Physics