A novel fuzzy PID control strategy of Buck converter system with double closed loop structures is proposed to solve problems that complex control objects are difficult of modeling and the artificial tuning experiences are lack
etc. The voltage and current loop structures are designed to improve both the anti-disturbance performance and the following performance of the system. A membership function that combines the Gauss function and the triangular function is selected to enhance the sensitivity of the controller to small error. Three sub inference devices are designed based on the PID parameters and the rule base of expert experiences
and the fuzzy rule of Buck converter is developed to make the designed controller independent of the precise mathematical model of Buck converter. So that it overcomes the high percent overshoot
oscillation and other shortcomings of the output voltage caused by traditional PID controls. A new Buck converter system of double closed loop circuits is designed
and the fuzzy PID control strategy is applied to control the quantities with rapid change and small time delay by making use of STM32. Experimental results show that the fuzzy PID control strategy not only improves the tracking accuracy of the output voltage
but also effectively suppresses the load disturbance and parameter perturbation
and that the overshoot of the output voltage is less than 10% and the adjustment time is less than 3 ms under the step to start. A comparison with the traditional PID system show that the designed system's output voltage ripple
maximum dynamic voltage drop and recovery time under the disturbance are reduced by one order of magnitude.
SHI Sanbao, XIA Zezhong. Simulation study of fuzzy adaptive PID control of DC-DC converters [J]. Journal of Wuhan University of Technology: Information and Management Engineering, 2006, 28(8): 20-23.
LI Jing, HU Baosheng. Algorithm, architecture and FPGA implementation for fuzzy PID gain conditioner [J]. Journal of Xi'an Jiaotong University, 1998, 32(5): 9-13.
DING Fang, JIA Xiangyu, LI Kewei, et al. Application of fuzzy algorithm in smart car [J]. Journal of Civil Aviation University of China, 2009, 27(1): 27-30.
LI Jun, LIU Junhua. Nonlinear inverse modeling of sensor based on back-propagation fuzzy logical system [J]. Academic Journal of Xian Jiaotong University, 2007(1): 14-17.
LI Shengnan, ZHANG Hao, MA Xikui, et al. Experimental study of border collision bifurcation in buck-boost DC/DC power converters [J]. Journal of Xi'an Jiaotong University, 2006, 40(4): 454-458.
WEN Le, GAO Lin, DAI Yiping. Study on fuzzy PID control of turbine-driven centrifugal compressor [J]. Journal of Xi'an Jiaotong University, 2011, 45(7): 76-81.
ZADEH L A. Fuzzy sets [J]. Information and Control, 1965, 65(8): 338-353.
LUO Guangming, HUANG Xiaoyu, ZHU Jianlin. Computer simulation of fuzzy self-tuning PID control based on MATLAB [J]. Machinery and Electronics, 2001(2): 23-26.
KARASAKAL O, GUZELKAYA M, EKSIN I, et al. Online tuning of fuzzy PID controllers via rule weighing based on normalized acceleration [J]. Engineering Applications of Artificial Intelligence, 2013, 26(1): 184-197.
WAEWSAK Y C, NOPHARATANA A, CHAIPRASERT P, et al. Neural-fuzzy control system application for monitoring process response and control of anaerobic hybrid reactor in wastewater treatment and biogas production [J]. Journal of Environmental Sciences, 2010, 22(12): 1883-1890.
NI Jun-Kang, LIU Chong-Xin, PANG Xia. Fuzzy fast terminal sliding mode controller using an equivalent control for chaotic oscillation in power system [J]. Acta Physica Sinica, 2013, 62(19): 190507.