Thermal Analysis for Hermetic R32 Rolling Piston Compressor

doi:10.7652/xjtuxb201503003

您当前的位置：

首页 >

文章列表页 >

Thermal Analysis for Hermetic R32 Rolling Piston Compressor

更新时间：2025-07-09

- Thermal Analysis for Hermetic R32 Rolling Piston Compressor
- Vol. 49, Issue 3, Pages: 14-18+150(2015)
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201503003
  CLC： TH45;TB652
- Online First：10 March 2015，
  
  Published：2015
- 稿件说明：
移动端阅览
Thermal Analysis for Hermetic R32 Rolling Piston Compressor[J]. 2015, 49(3): 14-18+150.
DOI：

Thermal Analysis for Hermetic R32 Rolling Piston Compressor[J]. 2015, 49(3): 14-18+150. DOI： 10.7652/xjtuxb201503003.

摘要

利用计算流体动力学软件对全封闭R32滚动活塞压缩机壳体、泵体零件、电机、制冷剂及润滑油的导热与对流换热进行了数值模拟。采用流固耦合传热分析法

将相接触的流体域和固体域进行整体计算

并在房间空调器压缩机高效工况以及ARI和ASHRAE/T1工况下测量了压缩机内部气缸、油池、电机及气体的温度。结果表明:计算与实验结果吻合较好; 在气缸侧面润滑油温降较大

在气缸下部润滑油温度场较为均匀; 气缸内表面温度沿周向从吸气孔到排气侧逐渐升高; 电机绕组温度高于铁心温度

3种工况下定子绕组顶部温度均最高

分别为94.0、119.2、136.9 ℃; ASHRAE/T1工况下定子绕组温度已超过电机常用B级绝缘所要求的130 ℃

此时应采取措施降低压缩机的排气温度。该结果可为R32压缩机及其系统的研制提供参考。

Abstract

The heat conduction and convection between components

refrigerant and lubricant oil in R32 rolling piston compressor are numerically simulated. The interactive fluid area and solid parts are totally evaluated by fluid-solid coupled heat transfer analysis. And the temperatures of cylinder

oil

motor and refrigerant vapor inside the compressor are measured experimentally under GX

ARI and ASHRAE/T1 conditions for a compressor used for room air conditioner. The theoretical predictions well coincide with the experimental data. The oil temperature on side of pump drops quickly and the temperature distribution in the bottom of pump is relatively uniform; the temperature on inner cylinder surface increases gradually from the suction port to exhaust side

and the winding temperature of motor is higher than core temperature; the temperatures at the top of stator winding are 94.0 ℃

119.2 ℃

136.9 ℃

respectively

under the above three conditions; the stator winding temperature under ASHRAE/T1 condition is more than 130 ℃ beyond common B insulation level

thus it is necessary to reduce discharge temperature of compressor.

关键词

Keywords

references

朱明善, 史琳. 在家用/商用空调中用R32替代R22的探索 [J]. 制冷与空调, 2009, 9(6): 31-34.

ZHU Mingshan, SHI Lin. Exploration of using R32 to substitute for R22 in household/commercial air-conditioning [J]. Refrigeration and Air-Conditioning, 2009, 9(6): 31-34.

PADHY S K, DWIVEDI S N. Heat transfer analysis of a rolling piston rotary compressor [J]. International Journal of Refrigeration, 1994, 17(6): 400-410.

LIU Z. Simulation of a variable speed compressor with special attention to supercharging effects [D]. Purdue, USA: Purdue University, 1993.

王刚, 吴建华, 孙民. 滚动活塞压缩机供油系统计算流体动力学分析 [J]. 西安交通大学学报, 2012, 46(11): 23-29.

WANG Gang, WU Jianhua, SUN Min. Computational fluid dynamics analysis on oil pumping system for rolling piston compressors [J]. Journal of Xi'an Jiaotong University, 2012, 46(11): 23-29.

YANAGISAWA T, SHIMIZU T, DOHI M, et al. A study on suction gas heating in a rolling piston rotary compressor [J]. Bulletin of JSME, 1984, 27(226): 741-748.

王水发, 陈德为. 基于ANSYS 的异步电动机二维稳态温度场分析 [J]. 电机传动自动化, 2011, 33(2): 23-26.

WANG Shuifa, CHEN Dewei. Analysis of two-dimensional steady temperature field of asynchronous motor based on ANSYS [J]. Electric Drive Automation, 2011, 33(2): 23-26.

矢岛龙三郎, 吉见敦史, 朴春成. 降低R32压缩机排气温度的方法 [J]. 制冷与空调, 2011, 11(2): 60-64.

YAJIMA R, YOSHIMI A, PIAO Chuncheng. Measures to reduce the discharge temperature of R32 compressor [J]. Refrigeration and Air-Conditioning, 2011, 11(2): 60-64.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of the Mechanism of Electrostatic Accumulation and Current Density Distribution Characteristics During Liquid Hydrogen Pipeline Transportation

Numerical Simulation of Space Charge Distribution Characteristics of Polyimide Materials under X-Ray Irradiation

Numerical Simulation Study on Geothermal Extraction Characteristics of Supercritical CO2 in Heterogeneous Fractures

Action Mechanism of Heat Transfer between the Working Medium and the Impeller on Aerodynamic Performance and Flow Characteristics of Radial Inflow Turbines with Supercritical Carbon Dioxide

Analysis of the Attached Vortex Model for the Flow Characteristics of Wing Near-Field Wakes

Related Author

SUN Wenhao

LIU Hongbao

WANG Lei

QING Ziyou

LI Zhuolun

MA Yuan

LI Yanzhong

ZHONG Hui

Related Institution

School of Energy and Power Engineering，Xi’an Jiaotong University

Aerospace System Engineering Shanghai

School of Electrical Engineering，Xi’an Jiaotong University

Northwest Institute of Nuclear Technology

Institute of Electronic Engineering，China Academy of Engineering Physics

⁰