Experimental Study on Heat Transfer Performance of Low Quality Two-Phase Working Medium in Cool Plate Evaporation with Rectangular Channels[J]. 2015, 49(1): 59-64.
DOI:
Experimental Study on Heat Transfer Performance of Low Quality Two-Phase Working Medium in Cool Plate Evaporation with Rectangular Channels[J]. 2015, 49(1): 59-64.DOI: 10.7652/xjtuxb201501010.
Experimental Study on Heat Transfer Performance of Low Quality Two-Phase Working Medium in Cool Plate Evaporation with Rectangular Channels
The heat transfer performance of the low quality two-phase working medium R22 in cool plate evaporation with rectangular channels was experimentally studied with the purpose of improving the cooling effect of electronic equipment in two-phase boiling heat transfer system. The quality of working medium before performing cool plate evaporation can be determined by controlling the input power of board-type electric heating
hence the heat transfer performance can be obtained under different system loadings and qualities. The results showed that the heat transfer performance in two-phase boiling heat transfer system under the condition of low quality
low charge and low flow rates decreased with the increase of quality. The relationship between the system pressure and flow rate was analyzed. It was showed that the system pressure increased with the system loading under the influence of vapor-liquid ratio
and the system flow increased with the system pressure until reaching the maximum under special working conditions. So the two-phase boiling heat transfer system has a positive impact on the cooling of electronic equipment under the condition of low quality
low charge and low flow
and the system can operate safely with a reduced vibration and energy consumption. In addition
the results can provide an experimental base for designing the board-type two-phase boiling heat transfer system.
关键词
Keywords
references
JANICKI M, NAPIERALSKI A. Modelling electronic circuit radiation cooling using analytical thermal model [J]. Microelectronics Journal, 2000, 31(9/10): 781-785.
吕洪涛. 电子设备散热技术探讨 [J]. 电子机械工程, 2011, 27(5): 8-11.
LV Hongtao. Discussion on cooling techniques for electronic equipment [J]. Electro-Mechanical Engineering, 2011, 27(5): 8-11.
HOA C, DEMOLDER B, ALEXANDRE A. Roadmap for developing heat pipes for ALCATEL SPACE's satellites [J]. Applied Thermal Engineering, 2003, 23(9): 1099-1108.
RICARDO J, JOHN R. Flow boiling in horizontal smooth tubes: new heat transfer results for R-134a at three saturation temperatures [J]. Applied Thermal Engineering, 2009, 29(7): 1289-1298.
ZHU Yu, HU Haitao, SUN Shuo. Heat transfer measurements and correlation of refrigerant flow boiling in tube filled with copper foam [J]. International Journal of Refrigeration, 2014, 38(10): 215-226.