Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table

doi:10.7652/xjtuxb201412002

您当前的位置：

首页 >

文章列表页 >

Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table

更新时间：2025-07-09

- Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table
- Vol. 48, Issue 12, Pages: 8-14(2014)
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710054
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201412002
  CLC： TH133.33
- Online First：10 December 2014，
  
  Published：2014
- 稿件说明：
移动端阅览
Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table[J]. 2014, 48(12): 8-14.
DOI：

Static Stiffness of Three-Row Cylindrical Roller Bearing for Rotary Table[J]. 2014, 48(12): 8-14. DOI： 10.7652/xjtuxb201412002.

摘要

为了改善转台的动静特性

分析了三排圆柱滚子转台轴承静刚度与轴承结构型式、装配工艺和外载荷的关系。结合轴承游隙、螺钉拧紧力矩、径向与轴向滚子间的相互作用和外载荷等因素

将轴向滚子与轴圈间的接触看作理想平面接触

考虑径向滚子压力沿轴向的分布

并利用Boussinesq力与变形关系式求解实际的压力值

通过求解轴承的整体静力平衡方程

得到了三排圆柱滚子转台轴承5个方向的静刚度值。分析结果表明:转台固有频率测试与理论值误差不超过3.0%

验证了刚度理论模型的准确性; 轴向滚子与径向滚子载荷间的相互作用很小; 螺钉拧紧力矩、径向游隙和外载荷对转台轴承刚度有重要影响

随着螺钉拧紧力矩和径向预压量的增大

外载荷对刚度的影响减弱。

Abstract

To improve static and dynamic performances of rotary table

the effects of configurations

assembling technology and external load on the static stiffness of a three-row cylindrical roller bearing for rotary table are investigated. A theoretical model of static stiffness of three-row cylindrical bearing for rotary table is proposed considering the clearance

bolt preloads

and reactions of axial and radial rollers with external load. The contacts between the axial rollers and the outer ring are treated as ideal plane contact. And the actual contact forces and their distribution along the axial of radial rollers are obtained by Boussinesq's relationship between force and deformation

the static stiffness in five directions is then sought out by solving the static equivalent equations. It is shown that the maximum error between experimental and theoretical results of natural frequency of the rotary table is less than 3.0%

thus the theoretical model is verified. The reactions between loads acting on the axial rollers and radial rollers are negligible. The bolt preloads

radial clearance and external load exert obvious effects on the static stiffness of rotary table bearing

and the effect of external load decreases with the increasing preloads of bolts and radial clearance.

关键词

Keywords

references

LIM T C, SINGH R. Vibration transmission through rolling element bearings: part I bearing stiffness formulation[J]. Journal of Sound and Vibration, 1990, 139(2): 179-199.

GUO Y, PARKER R G. Stiffness matrix calculation of rolling element bearings using a finite element/contact mechanics model[J]. Mechanism and Machine Theory, 2012, 51: 32-45.

邹英永, 温建民, 于广滨. 径向力和弯矩联合作用下滚子轴承的刚度计算[J]. 中国机械工程, 2006, 17(15): 1572-1575.

ZOU Yingyong, WEN Jianmin, YU Guangbin. Stiffness calculation of roller bearings with radial force and moment loads[J]. China Mechanical Engineering, 2006, 17(15): 1572-1575.

崔立, 王黎钦, 郑德志, 等. 航空发动机高速滚子轴承动态特性分析[J]. 航空学报, 2008, 29(2): 492-498.

CUI Li, WANG Liqin, ZHENG Dezhi, et al. Analysis on dynamic characteristics of aero-engine high-speed roller bearings[J]. Acta Aeronautica Et Astronautica Sinica, 2008, 29(2): 492-498.

于春来, 刘洪海, 郭云飞. 三排圆柱滚子转盘轴承寿命计算[J]. 轴承, 2011(8): 7-8.

YU Chunlai, LIU Honghai, GUO Yunfei. Life of three row cylindrical roller slewing bearings[J]. Bearings, 2011(8): 7-8.

AGUIRREBEITIA J, ABASOLO M, AVILÉS R, et al. Theoretical calculation of general static load-carrying capacity for the design and selection of three row roller slewing bearings[J]. Mechanism and Machine Theory, 2012, 48: 52-61.

KANIA L, KRYNKE M, MAZANEK E. A catalogue capacity of slewing bearings[J]. Mechanism and Machine Theory, 2012, 58: 29-45.

GÖNCZ P, POTOCˇNIK R, GLODE S. Computational model for determination of static load capacity of three-row roller slewing bearings with arbitrary clearances and predefined raceway deformations[J]. International Journal of Mechanical Sciences, 2013, 73: 82-92.

HARRIS T A, KOTZALAS M N. Rolling bearing analysis: advanced concepts of bearing technology[M]. Boca Raton, FL, SUA: CRC Press, 2006: 17-27.

符晶, 王慧, 温诗铸. 任意弹性表面接触问题的数值解法及对滚子修缘的分析[J]. 轴承, 1990(1): 6-12.

FU Jing, WANG Hui, WEN Shizhu. Numerical method for contact problem between arbitrary elastic surfaces and analysis of crowned roller[J]. Bearings, 1990(1): 6-12.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Iterative Method to Solve Bearing's Force and Stiffness for a Multi-Support Spindle System Based on Finite Element Analysis

Experimental Analysis for Dynamic Stiffness of Angular Contact Ball Bearings

Integrated and Joint Design Optimization of Centrifugal Compressor Impeller and Casing Treatment at Multiple Working Points

Numerical Simulation of the Energy Conversion Process in Thermoacoustic Engines with Different Stack Materials

Electrothermal Coupling Research on the Evolutionary Law of Anti-Corona Performance for High-Altitude Air-Cooled Generators

Related Author

刘显军 1

洪军 2

朱永生 2

刘志刚 2

李纯洁

洪军

张进华

Related Institution

Institute of System Engineering, China Academy of Engineering Physics

School of Mechanical Engineering, Xi'an Jiaotong University

⁰