Research on Axial Dynamic Stiffness of Fix-Pressure Spindle

doi:10.7652/xjtuxb201410020

您当前的位置：

首页 >

文章列表页 >

Research on Axial Dynamic Stiffness of Fix-Pressure Spindle

更新时间：2025-07-09

- Research on Axial Dynamic Stiffness of Fix-Pressure Spindle
- Vol. 48, Issue 10, Pages: 126-130(2014)
- 作者机构：
  
  西安交通大学现代设计与转子轴承系统教育部重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201410020
  CLC： TH133
- Online First：10 October 2014，
  
  Published：2014
- 稿件说明：
移动端阅览
Research on Axial Dynamic Stiffness of Fix-Pressure Spindle[J]. 2014, 48(10): 126-130.
DOI：

Research on Axial Dynamic Stiffness of Fix-Pressure Spindle[J]. 2014, 48(10): 126-130. DOI： 10.7652/xjtuxb201410020.

摘要

针对目前主轴动态刚度研究中存在的建模过程复杂、计算量大、忽略轴承受力分析的问题

结合理论建模及实验测试

系统研究了定压预紧主轴轴向动态刚度随轴向载荷的变化规律。基于球轴承轴向载荷与轴向变形的经验公式

建立了定压预紧主轴轴向动态刚度分析模型

理论推导出定压预紧主轴轴向动态刚度随轴向载荷的变化关系; 设计了定压预紧主轴动态刚度测试实验

实现了对工作状态下主轴轴承位移量及相应轴向载荷的精确测试; 求解了主轴的轴向动态刚度

并与仿真数据进行了对比。实验结果表明:在前轴承内外圈压紧方向

随着轴向力的增大

主轴的轴向刚度呈现增大趋势; 在前轴承内外圈脱离方向

随着轴向力的增大

其主轴的轴向刚度先减小后趋于定值。实验结果验证了模型仿真的有效性和正确性。

Abstract

Dynamic stiffness of a spindle in condition of service state changes with the operating conditions and loads

and is the main indicator of the dynamic performance of the spindle. The deficiency of the current study is that the model is very complex with large amount of calculation

and the load characteristic of bearing is always ignored during analysis. The relationship between axial load and stiffness of fixed-pressure spindles is systematically researched through the combination of theoretical methods and experimental tests. A model of fixed-pressure preload spindle is built based on the empirical formula of relationship between axial load and axial deformation

and the dynamic relationship between axial dynamic stiffness of spindle and axial load is theoretically derived. Then an experiment to test the dynamic stiffness is designed. Axial force is applied to the working spindle and its displacement is tested using three displacement sensors. The stiffness of the spindle is calculated and compared with simulation data. Experimental results show that the dynamic stiffness of the fixed-pressure preload spindle increases with the increase of axial load when the outer ring and inner ring of the front bearing of the spindle are compressed

and the stiffness reduces first and then tends to be constant with the increase of axial load when the outer ring and inner ring of the front bearing of the spindle separate.

关键词

Keywords

references

杨美英. 数控机床主轴组件设计及刚度计算[J]. 机械工程与自动化, 2004,(2): 72-74.

YANG Meiying. Spindle unit design and rigidity calculation of NC lathe CNC 30[J]. Mechanical Engineering and Automation, 2004,(2): 72-74.

刘秀莲, 罗凤利. 数控机床主轴动刚度特性的研究及试验[J]. 煤矿机械, 2008, 29(7): 53-55.

LIU Xiulian, LUO Fengli. Analysis of hydraulic gap control for four-high cold rolling mill[J]. Coal Mine Machinery, 2008, 29(7): 53-55.

NSK. Super Precision Bearings[EB/OL].(2012-04-01)[2013-04-02]. http:∥www.cn.nsk.com/services/catalog/pdf/NSK_CAT_CH1254e.pdf.

喻丽华. 传递矩阵法分析计算机床主轴刚度[J]. 贵州工业大学学报: 自然科学, 2001, 30(4): 71-77.

YU Lihua. Analyzing and calculating the rigidity of spindles on machine tools by means of transfer matrix[J]. Journal of Guizhou University of Technology: Natural Sciences, 2001, 30(4): 71-77.

黄应勇. CK6136车床主轴刚度研究[J]. 制造业自动化, 2011(1): 138-140.

HUANG Yingyong. The research of stiffness of CK6136 lathe spindle[J]. Manufacturing Automation, 2011(1): 138-140.

TIWARI R, VYAS N S. Stiffness estimation from random response in multi-mass rotor bearing systems[J]. Probabilistic Engineering Mechanics, 1998, 13(4): 255-268.

TIWARI R, VYAS N S. Estimation of non-linear stiffness parameters of rolling element bearings from random response of rotor-bearing systems[J]. Journal of Sound and Vibration, 1995, 187(2): 229-239.

WALFORD T L H, STONE B J. The measurement of the radial stiffness of rolling element bearings under oscillating conditions[J]. Journal of Mechanical Engineering Science, 1980, 22(4): 175-181.

人本集团. 滚动轴承综合样本[EB/OL].(2010-10-11)[2013-04-02]. http:∥www.cugroup.com/cn/knowledge_in.asp?id0=2id1=37id2=55page=68.

HARRIS T A, KOTZALAS M N. Essential concepts of bearing technology[M]. 5th ed, Boca Raton, FL, USA: CRC Press, 2006: 133-135.

梅冠华,杨树华,张家忠,等.用于跨/超声速壁板颤振精确分析的流-固耦合有限元算法.2014,48(1):73-83.[doi:10.7652/xjtuxb201401013]

王磊,杜瑞,金涛,等.螺钉连接固定结合面匹配设计研究.2013,47(7):62-67.[doi:10.7652/xjtuxb201307012]

李纯洁,洪军,张进华,等.角接触球轴承动刚度的实验研究.2013,47(7):68-72.[doi:10.7652/xjtuxb201307013]

田久良,洪军,朱永生,等.机床主轴-轴承系统热-力耦合模型及其动态性能研究.2012,46(7):63-68.[doi:10.7652/xjtuxb201207012]

黄东洋,洪军,张进华,等.热阻网络法在轴系温度场求解中的应用.2012,46(5):63-66.[doi:10.7652/xjtuxb201205011]

王宁,李宝童,洪军,等.螺栓支承面有效半径的影响因素.2012,46(4):132-136.[doi:10.7652/xjtuxb201204022]

陈成军,杨国庆,常东方,等.面向结合面密封性能要求的装配连接工艺设计.2012,46(3):75-83.[doi:10.7652/xjtuxb 201203014]

刘显军,洪军,朱永生,等.多支承轴系轴承受力与刚度的有限元迭代计算方法.2010,44(11):41-45.[doi:10.7652/xjtuxb201011009]

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Mechanism and Optimal Control Strategy for Hysteresis in Rapid Dehumidification Response of Indirect Thermal Systems in Electric Vehicles

Electrothermal Coupling Research on the Evolutionary Law of Anti-Corona Performance for High-Altitude Air-Cooled Generators

Integrated and Joint Design Optimization of Centrifugal Compressor Impeller and Casing Treatment at Multiple Working Points

Diffusion Characteristics and Influencing Factors in Case of Hydrogen Leakage from Fuel Cell Vehicles Running in Tunnels

Windage Loss and Flow Characteristics in Impeller Back Gaps of sCO2 Radial Inflow Turbines

Related Author

No data

Related Institution

No data

⁰