Three-Parameter Bounded Intensity Process Model and Its Application in Reliability Assessment of NC Machine Tools

doi:10.7652/xjtuxb201405019

您当前的位置：

首页 >

文章列表页 >

Three-Parameter Bounded Intensity Process Model and Its Application in Reliability Assessment of NC Machine Tools

更新时间：2025-07-09

- Three-Parameter Bounded Intensity Process Model and Its Application in Reliability Assessment of NC Machine Tools
- Vol. 48, Issue 5, Pages: 107-112(2014)
- 作者机构：
  
  1. 兰州理工大学机电工程学院,兰州,730050
  2. 电子科技大学机械电子工程学院,成都,611731
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201405019
  CLC： TG659;TB114
- Online First：10 May 2014，
  
  Published：2014
- 稿件说明：
移动端阅览
Three-Parameter Bounded Intensity Process Model and Its Application in Reliability Assessment of NC Machine Tools[J]. 2014, 48(5): 107-112.
DOI：

Three-Parameter Bounded Intensity Process Model and Its Application in Reliability Assessment of NC Machine Tools[J]. 2014, 48(5): 107-112. DOI： 10.7652/xjtuxb201405019.

摘要

为提高数控机床可靠性评估的准确性

基于边界强度过程理论

提出一种初始时刻故障强度不为零的三参数边界强度过程模型。通过对故障强度函数进行求导运算

证实了模型的特性

并推导了三参数边界强度过程和齐次泊松过程之间的关系。利用极大似然估计法和优化方法

给出了模型参数及可靠性指标的计算公式。分别以单台数控机床故障截尾数据和多台数控机床时间截尾数据为例对模型进行验证

对数似然函数及拟合优度计算结果均表明:三参数边界强度过程模型优于边界强度过程模型

而且更符合工程实际

可为制定合理的维修策略提供一定的理论依据。

Abstract

To improve the reliability assessment accuracy of NC machine tools

a three-parameter bounded intensity process(3-BIP)model by intensity function with non-zero initial condition is proposed. The characteristic of the model is confirmed by differentiating with respect to the failure intensity function

and the relationship between the three-parameter bounded intensity process and the homogenous Poisson process is derived. The calculating formula for model parameters and reliability indexes are deduced by the maximum likelihood estimation and optimization. Two examples of the failure truncated data from single NC machine tool and the time truncated data from multiple NC machine tools are taken respectively to verify the proposed method. The results of log-likelihood function and goodness-of-fit show that the 3-BIP model is better than the BIP model

so the 3-BIP model accords with practical engineering well and provides a theoretical basis for making a reasonable maintenance strategy.

关键词

Keywords

references

康锐, 李瑞莹, 王乃超, 等. 可靠性与维修性工程概论[M]. 北京: 清华大学出版社, 2010.

张英芝, 申桂香, 薛玉霞, 等. 随机截尾数控机床故障过程[J]. 吉林大学学报: 工学版, 2007, 37(6): 1346-1348.

ZHANG Yingzhi, SHEN Guixiang, XUE Yuxia, et al. Failure process for numerical control machine with random ending method[J]. Journal of Jilin University: Engineering and Technology Edition, 2007, 37(6): 1346-1348.

MARSHALL S E, CHUKOVA S. On analyzing warranty data from repairable items[J]. Quality and Reliability Engineering International, 2010, 26(1): 43-52.

王智明, 杨建国, 王国强, 等. 多台数控机床最小维修的可靠性评估[J]. 哈尔滨工业大学学报, 2011, 43(7): 127-130.

WANG Zhiming, YANG Jianguo, WANG Guoqiang, et al. Reliability assessment of multiple NC machine tools with minimal repair[J]. Journal of Harbin Institute of Technology, 2011, 43(7): 127-130.

WANG Z M, YU X. Log-linear process modeling for repairable systems with time trends and its applications in reliability assessment of numerically controlled machine tools[J]. Proceedings of the Institution of Mechanical Reliability Engineers: Part O Journal of Risk and Reliability, 2013, 227: 55-65.

ASCHER H, FEINGOLD H. Repairable systems reliability: modeling, misconceptions and their causes[M]. New York, USA: Marcel Dekker, 1984.

PULCINI G. A bounded intensity process for the reliability of repairable equipment[J]. Journal of Quality Technology, 2001, 33(4): 480-492.

王智明, 杨建国. 数控机床可靠性评估中的边界强度过程[J]. 上海交通大学学报, 2012, 30(10): 1622-1626.

WANG Zhiming, YANG Jianguo. Bounded intensity process and its applications in reliability assessment of NC machine tools[J]. Journal of Shanghai Jiaotong University, 2012, 30(10): 1622-1626.

THOMPSON W A. On the foundation of reliability[J]. Technometrics, 1981, 23(1): 1-13.

ENGELLHARDT M, BAIN L J. On the mean time between failures for repairable systems[J]. IEEE Transactions on Reliability, 1986, 35(4): 419-422.

许彬彬, 杨兆军, 陈菲, 等. 非齐次泊松过程的数控机床可靠性建模[J]. 吉林大学学报: 工学版, 2011, 41(S2): 210-214.

XU Binbin, YANG Zhaojun, CHEN Fei, et al. Reliability model of CNC machine tools based on non-homogeneous Poisson process[J]. Journal of Jilin University: Engineering and Technology Edition, 2011, 41(S2): 210-214.

LOUIT D M, PASCUAL R, JARDINE A K S. A practical procedure for the selection of time-to-failure models based on the assessment of trends in maintenance data[J]. Reliability Engineering and System Safety, 2009(94): 1618-1628.

舒继森, 郭兵兵, 张俊阳, 等. 基于拟合优度指标评价的岩土参数概率分布研究[J]. 采矿与安全工程学报, 2008, 25(2): 197-201.

SHU Jisen, GUO Bingbing, ZHANG Junyang, et al. Research on probability distribution of parameters of rock and soil based on fitting optimization index[J]. Journal of Mining Safety Engineering, 2008, 25(2): 197-201.

杨军,施虎,梅雪松,等.双驱伺服进给系统热误差的试验测量与预测模型构建.2013,47(11):53-59.[doi:10.7652/xjtuxb201311010]

冯斌,梅雪松,杨军,等.数控机床摩擦误差自适应补偿方法研究.2013,47(11):65-69.[doi:10.7652/xjtuxb201311012]

陈晓光,徐光华,梁霖,等.一种电流弱信号特征提取方法.2013,47(9):83-87.[doi:10.7652/xjtuxb201309014]

赵飞,梅雪松,姜歌东,等.数控机床进给系统模态参数的自激振辨识方法.2013,47(5):88-92.[doi:10.7652/xjtuxb 201305016]

李学伟,赵万华,卢秉恒.轨迹误差建模的多轴联动机床轮廓误差补偿技术.2012,46(3):47-52.[doi:10.7652/xjtuxb 201203009]

吴沁,芮执元,杨建军.考虑非线性弹性力的滚珠丝杠系统分岔与混沌特性分析.2012,46(1):70-75.[doi:10.7652/xjtuxb201201013]

蔡改改,陈雪峰,陈保家,等.利用设备响应状态信息的运行可靠性评估.2012,46(1):108-113.[doi:10.7652/xjtuxb2012 01020]

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

I/O Performance Modeling and Prediction Method for Large-Scale Parallel Applications Using Machine Learning

Integrated and Joint Design Optimization of Centrifugal Compressor Impeller and Casing Treatment at Multiple Working Points

Windage Loss and Flow Characteristics in Impeller Back Gaps of sCO2 Radial Inflow Turbines

Knowledge Graph Representation Learning Driven by Semantic Discrimination and Subgraph Integration

Numerical Simulation of the Energy Conversion Process in Thermoacoustic Engines with Different Stack Materials

Related Author

No data

Related Institution

No data

⁰