Experimental Study on Flow Patterns of Direct Contact Condensation Between Steam Jet and Subcooled Water Flow in Rectangular Channel[J]. 2014, 48(5): 50-55.
DOI:
Experimental Study on Flow Patterns of Direct Contact Condensation Between Steam Jet and Subcooled Water Flow in Rectangular Channel[J]. 2014, 48(5): 50-55.DOI: 10.7652/xjtuxb201405009.
Experimental Study on Flow Patterns of Direct Contact Condensation Between Steam Jet and Subcooled Water Flow in Rectangular Channel
To fundamentally understand the details of steam-water interface
visual investigation is conducted in a rectangular channel with rectangular nozzles. The flow fields of DCC are filmed when the steam pressure
subcooled water pressure and subcooled water temperature at the device inlet get 0.1-0.45 MPa
0.1-0.4 MPa
and 30 ℃ respectively. Moreover
a condensation regime map based on the inlet parameters is achieved. The result indicates that the process of DCC in a rectangular channel can be divided into five regions: steam region
subcooled water region
mixture layer
backflow region and homogenous bubble region. The interface between steam region and mixture layer is clearly observed. Under various inlet steam
and water conditions
the flow patterns of DCC can be characterized as bubble flow
interface oscillation
tail oscillation
stable jet and divergent jet. The temperature distribution on the bottom wall is obtained
and the average heat transfer coefficient of stable jet is found to be within the range of 5.2-9.0 MW·m
-2
· ℃
-1
.
关键词
Keywords
references
CELATA G P, CUMO M, FARELLO G E, et al. Direct contact condensation of steam on a horizontal surface of water[J]. Heat and Mass Transfer, 1987, 21(2/3): 169-180.
CHUN M H, KIM Y S, PARK J W. An investigation of direct condensation of steam jet in subcooled water[J]. International Communications of Heat and Mass Transfer, 1996, 23(7): 947-958.
XU Qiang, GUO Liejin, ZOU Suifeng, et al. Experimental study on direct contact condensation of stable steam jet in water flow in a vertical pipe[J]. International Journal of Heat and Mass Transfer, 2013, 66: 808-817.
WU Xingzhuang, YAN Junjie, SHAO Shufeng, et al. Experimental study on the condensation of supersonic steam jet submerged in quiescent subcooled water: steam plume shape and heat transfer[J]. International Journal of Multiphase Flow, 2007, 33(12): 1296-1307.
YAN Junjie, SHAO Shufeng, LIU Jiping, et al. Experiment and analysis on performance of steam-driven jet injector for district-heating system[J]. Applied Thermal Engineering, 2005, 25(8): 1153-1167.
MALIBASHEV S K. Experimental investigation of transparent models of steam-water injector with a convergent nozzle[J]. Atomic Energy, 2001, 90(6): 469-474.
DEBERNE N, LEONE J F, LALLEMAND A. Local measurements in the flow of a steam injector and visualization[J]. International Journal of Thermal Science, 2000, 39(9): 1056-1065.
WANG Zunjing, CHEN Min, GUO Zengyuan. Molecular dynamics study of the Lennard-Jones liquid-vapor interface[J]. Journal of Tsinghua University, 2001, 41(2): 80-83.
PETROVIC A. Analytical study of flow regimes for direct contact condensation based on parametrical investigation[J]. ASME Journal of Pressure Vessel Technology, 2005, 127(1): 20-25.
KIM Y S, PARK J W, SONG C H. Investigation of the stem-water direct contact condensation heat transfer coefficients using interfacial transport models[J]. International Communications in Heat and Mass Transfer, 2004, 31(3): 397-408.