Experimental Research on Surface Modification of Polytetrafluoroethylene by Ar Atmospheric Pressure Plasma Jet

HAO Zhiyuan; JI Shengchang; SONG Ying

doi:10.7652/xjtuxb201404011

您当前的位置：

首页 >

文章列表页 >

Experimental Research on Surface Modification of Polytetrafluoroethylene by Ar Atmospheric Pressure Plasma Jet

更新时间：2025-04-29

- Experimental Research on Surface Modification of Polytetrafluoroethylene by Ar Atmospheric Pressure Plasma Jet
- Vol. 48, Issue 4, Pages: 59-67(2014)
- 作者机构：
  
  西安交通大学电力设备电气绝缘国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201404011
  CLC： TM89
- Online First：10 April 2014，
  
  Published：2014
- 稿件说明：
移动端阅览
HAO Zhiyuan, JI Shengchang, SONG Ying. Experimental Research on Surface Modification of Polytetrafluoroethylene by Ar Atmospheric Pressure Plasma Jet[J]. 2014, 48(4): 59-67.
DOI：

HAO Zhiyuan, JI Shengchang, SONG Ying. Experimental Research on Surface Modification of Polytetrafluoroethylene by Ar Atmospheric Pressure Plasma Jet[J]. 2014, 48(4): 59-67. DOI： 10.7652/xjtuxb201404011.

摘要

采用氩等离子体射流对有机材料聚四氟乙烯(PTFE)进行表面改性

通过接触角测量、扫描电子显微镜(SEM)观察、X射线光电子能谱(XPS)和衰减全反射红外光谱(ATR-FTIR)分析

以及表面电阻率和沿面闪络电压等参量的测量

研究了等离子体射流处理前后PTFE的表面特性。实验结果表明:氩等离子体射流产生的粒子主要有OH、N

、Ar和少量的O。PTFE经大气压氩等离子体射流处理后

其表面水接触角下降

表面粗糙度变大

表面突起和裂痕显著增加

且表面有新的含氧基团生成; 增加表面改性时间

表面改性效果会达到饱和状态; 另一方面

表面改性后的PTFE存在微弱的老化效应

当在空气中放置10 d后

其表面水接触角为66.2°

仍然低于表面处理前的值。由于等离子体改性使PTFE表面形态及化学成分发生变化

粗糙度增加

使PTFE表面电阻率降低

导致其沿面闪络电压升高。

Abstract

Atmospheric pressure plasma jet is employed for surface modification of polytetrafluoroethylene(PTFE). The microstructures and properties of the PTFE are investigated

including water contact angle measurements

surface morphology observation by scanning electron microscopy(SEM)

surface chemical composition analysis by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy(XPS)and surface resistivity and flashover voltage measurements. It is found that the argon plasma surface modification enhances surface hydrophilic

increases the surface roughness and introduces oxygen-containing polar functional groups on the surface. With the increasing discharge period

the water contact angle decreases to the saturation value. After setting the modified surface in air for ten days

its water contact angle of 66.2° is still much lower than that of the control sample. The surface resistivity of the modified PTFE reduces and the plasma modification heightens the surface flashover voltage due to increasing surface roughness.

关键词

Keywords

references

KOGELSCHATZ U. Dielectric-barrier discharges: their history, discharge physics, and industrial applications[J]. Plasma Chemistry and Plasma Processing, 2003, 23(1): 1-46

牛铮, 邵涛. 空气中纳秒脉冲均匀DBD增加聚合物的表面亲水性[J]. 高电压技术, 2011, 37(6): 1536-1541.NIU Zheng, SHAO Tao. Hydrophilic improvement of polymers treated by homogeneous nanosecond pulse dielectric barrier discharge in atmospheric air[J]. High Voltage Engineering, 2011, 37(6): 1536-1541

KUNHARDT E E. Generation of large-volume, atmospheric-pressure, nonequilibrium plasma[J]. IEEE Trans on Plasma Science, 2000(1): 189-200

FANG Z, QIU Y. Surface modification of polytetrafluoroethylene film using the atmospheric pressure glow discharge in air[J]. J Phys: D Appl Phys, 2003, 36(23): 2980-2985

NOH J H, BAIK H K, NOH I, et al. Surface modification of polytetrafluoroethylene using atmospheric pressure plasma jet for medical application[J]. Surface and Coatings Technology, 2007, 201(9/10/11): 5097-5101

SHAO Xianjun, ZHANG Guanjun. Research on surface modification of polytetrafluoroethylene coupled with argon dielectric barrier discharge plasma jet characteristics[J]. IEEE Trans Plasma Sci, 2011, 39(11): 3095-3102

BADEY J P, ESPUCHE E, SAGE D, et al. A comparative study of the effects of ammonia and hydrogen plasma downstream treatment on the surface modification of polytetrafluoroethylene[J]. Polymer, 1996, 37(8): 1377-1386

XU Hua, HU Zheng, WU Shihua, et al. Surface modification of polytetrafluoroethylene by microwave plasma treatment of H2O/Ar mixture at low pressure[J]. Materials Chemistry and Physics, 2003, 80(1): 278-282

CHEN Meng, ZAMORA P O, SOM P, et al. Cell attachment and biocompatibility of polytetrafluoroethylene(PTFE)treated with glow-discharge plasma of mixed ammonia and oxygen[J]. Journal of Biomaterials Science Polymer Edition, 2003, 14(9): 917-935

RADU I, BARTNIKAS R, WERTHEIMER M R. Frequency and voltage dependence of glow and pseudoglow discharge in helium under atmospheric pressure[J]. IEEE Transactions on Plasma Science, 2003, 31(6): 1363-1378

WAGNER H E, BRANDENBURG R. The barrier discharge: basic properties and application to surface treatment[J]. Vacuum, 2003, 71(3): 417-436

ZHANG Cheng, SHAO Tao, LONG Kaihua, et al. Surface treatment of polyethylene terephthalate films using DBD excited by repetitive unipolar nanosecond pulses in air at atmospheric pressure[J]. IEEE Transactions on Plasma Science, 2010, 38(6): 1517-1526

UPADHYAY D J, CUI Nai-Yi, ANDERSON C A, et al. Surface oxygenation of polypropylene using an air dielectric barrier discharge: the effect of different electrode platen combinations[J]. Applied Surface Science, 2004, 229(1/2/3/4): 352-364

SHAO Tao, ZHANG Cheng, LONG Kaihua, et al. Surface modification of polyimide films using unipolar nanosecond-pulse DBD in atmospheric air[J]. Applied Surface Science, 2010, 256(12): 3888-3894

YAMAMOTO O, TAKUMA T. Improving withstand voltage by roughening the surface of an insulating spacer used in vacuum[J]. IEEE Trans DEI, 2003, 10(4): 550-556

MILLER H C. Surface flashover of insulators[J]. IEEE Trans Electr Insul, 1989, 24(5): 765-786.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on Kinetics and PVP Coupling Mechanism of Nanoscale Zinc Oxide Synthesized by Supercritical Water Hydrothermal Method

Preparation and Biocompatibility Evaluation of Modified Hydroxyapatite/Poly L-Lactic Acid Composites

AC Flashover Performance of Contaminated Insulators in Hot Water Vapor Washing

Surface Modification of Microelectrode for Deep Brain Stimulation

Windage Loss and Flow Characteristics in Impeller Back Gaps of sCO2 Radial Inflow Turbines

Related Author

YANG Jianqiao

LIU Hui

WANG Shuzhong

LIU Lu

ZHAO Jun'an

柏树令 3

佟浩 3

赫美 1

Related Institution

(School of Energy and Power Engineering, Xi'an Jiaotong University,,)

College of Food Engineering, Harbin University of Commerce

State Key Laboratory for Manufacturing System Engineering, Xi'an Jiao tong University

⁰