Boundary Element Analysis of the Two-Dimensional Heat Conduction Equation for Anisotropic Functional Graded Materials[J]. 2013, 47(5): 77-81.
DOI:
Boundary Element Analysis of the Two-Dimensional Heat Conduction Equation for Anisotropic Functional Graded Materials[J]. 2013, 47(5): 77-81.DOI: 10.7652/xjtuxb201305014.
Boundary Element Analysis of the Two-Dimensional Heat Conduction Equation for Anisotropic Functional Graded Materials
Focusing on heat conduction in anisotropic functionally graded materials
the thermal conductivity is taken as an exponent
and the fundamental solution to the heat conduction equation is derived by means of the two-dimensional Fourier integral transformation and the generalized function. Following the solution and the boundary conditions
the boundary integral equation is established. The temperatures and the heat flux at the internal points and the nodes are given in terms of the discretized boundary integral equation. The numerical examples are given by using constant boundary elements and a square model. It explains that the anisotropic functionally graded materials are endowed with some specific physical qualities
such as withstanding high temperature
and resisting thermal and remnant stresses. The fundamental solution is expected to investigate the thermo-mechanical behavior of the anisotropic functionally graded materials with the boundary element method.
关键词
Keywords
references
LI Xing, LIU Junqiao. Scattering of the SH wave from a crack in a piezoelectric substrate bonded to a half-space of functionally graded materials [J]. Acta Mechanica, 2009, 208(3): 299-308.
LIU Junqiao, DUAN Huiqin, LI Xing. The scattering of SH wave on a vertical crack in a coated piezoelectric strip [J]. Chinese Journal of Solid Mechanics, 2010, 31(4): 385-391.
LIU Junqiao, LI Xing. The scattering of SH wave on a crack in an infinite of orthotropic functionally graded material plane [J]. Journal of Linyi Teachers' College, 2006, 28(3): 16-19.
KATSIKADELIS J T. Boundary elements theory and applications [M]. Amsterdam, The Netherlands: Elsevier, 2002: 92-96.
LIU Junqiao, DUAN Huiqin, DONG Shuzhuan. The general solution of the pane thermal stress in the functional materials with exponential variation of constants [J]. Mathematics in Practice and Theory, 2010, 40(19): 100-103.
CHEN Jian. Determination of thermal stress intensity factors for interface crack in a graded orthotropic coating-substrate structure [J]. International Journal of Fracture, 2005, 133(4): 303-328.
ZHOU Y T, LI X, QIN J Q. Transient thermal stress analysis of orthotropic functionally graded materials with a crack [J]. Journal of Thermal Stresses, 2007, 30: 1211-1231.
JIN Z H, FENG Y Z. Thermal fracture resistance of a functionally graded coating with periodic edge crack [J]. Surface and Coatings Technology, 2008, 202(17): 4189-4197.
ZHOU Yueting, LI Xing, YU Dehao. A partially insulated interface crack between a graded orthotropic coating and a homogeneous orthotropic substrate under heat flux supply [J]. International Journal of Solids and Structures, 2010, 47(6): 768-778.
DING Sheng-Hu, LI Xing. Thermal stress intensity factors for an interface crack in a functionally graded layered structures [J]. Arch Appl Mech, 2011, 81(7): 943-955.
ITOU S. Thermal stress intensity factors of an infinite orthotropic layer with a crack [J]. International Journal of Fracture, 2000, 103: 279-291.