Arc Temperature Distribution of Gas Tungsten Arc Welding in External Longitudinal Magnetic Field

doi:10.7652/xjtuxb201303016

您当前的位置：

首页 >

文章列表页 >

Arc Temperature Distribution of Gas Tungsten Arc Welding in External Longitudinal Magnetic Field

更新时间：2025-07-09

- Arc Temperature Distribution of Gas Tungsten Arc Welding in External Longitudinal Magnetic Field
- Vol. 47, Issue 3, Pages: 85-89+119(2013)
- 作者机构：
  
  西安交通大学金属材料强度国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：10.7652/xjtuxb201303016
  CLC： TG403
- Online First：10 March 2013，
  
  Published：2013
- 稿件说明：
移动端阅览
Arc Temperature Distribution of Gas Tungsten Arc Welding in External Longitudinal Magnetic Field[J]. 2013, 47(3): 85-89+119.
DOI：

Arc Temperature Distribution of Gas Tungsten Arc Welding in External Longitudinal Magnetic Field[J]. 2013, 47(3): 85-89+119. DOI： 10.7652/xjtuxb201303016.

摘要

通过采集钨极氩弧焊电弧单色图像

采用Fowler-Milne法得到了纵向磁场作用下的电弧温度场

研究了磁感应强度、焊接电流和弧长对电弧温度场的影响。结果表明:在纵向磁场作用下

电弧温度整体降低

电弧体下部出现低温腔; 电弧温度场受磁感应强度、焊接电流及弧长的影响。结合电弧图像及温度场在纵向磁场作用下的变化规律

对纵向磁场作用下电弧的演变过程进行了描述:随着磁感应强度增大

在洛仑兹力与自磁收缩力的共同作用下电弧出现先扩张后收缩的现象; 随着弧长变长

低温腔变大

阳极附近电弧中心温度变低

且温度半径变大; 随着焊接电流的增大

电弧作用半径及电弧的温度半径变大。

Abstract

By the spectral images of arc

the temperature field of welding arc in longitudinal electromagnetic field(LEMF)is revealed with Fowler-Milne method. It is shown that LEMF makes the temperature of arc getting lower

and a low-temperature cavity appears in the underpart of arc body. The influences of magnetic flux density

arc length

and welding current on the temperature field are discussed. The arc evolution process for different magnetic flux density is explained according to the changing regularity of arc images and temperature field. With the increasing magnetic flux density

the arc expands firstly then contracts due to the resultant of Lorenz force and self-magnetic contracting force. When the arc length gets longer

the low-temperature cavity becomes bigger

the radius of temperature near the anode increases

and the temperature gets lower at the arc centre. Both the radius of arc body and the radius of temperature field increase with the strengthening welding current.

关键词

Keywords

references

MATSUDA F, NAKAGAWA H, NAKATA K, et al. Effect of electromagnetic stirring on weld solidification structure of aluminum alloys: Ⅰ Investigation on GTA weld metal of thin sheet [J]. Transactions of JWRI, 1978, 7(1): 111-127.

殷咸青, 李海刚, 罗键. 用电磁搅拌抑制LD10CS铝合金焊缝热裂纹的研究 [J]. 西安交通大学学报, 1998, 32(5): 91-95.

YIN Xianqing, LI Haigang, LUO Jian. Study on the elimination of weld hot cracking of LD10CS aluminum alloy with electromagnetic stirring [J]. Journal of Xi'an Jiaotong University, 1998, 32(5): 91-95.

罗键, 贾昌申, 王雅生, 等. 外加纵向磁场GTAW焊接机理 [J]. 金属学报, 2001, 37(2): 212-220.

LUO Jian, JIA Changshen, WANG Yasheng, et al. Mechanism of the gas tungsten-arc welding in longitudinal magnetic field controlling [J]. Metallurgica Sinica, 2001, 37(2): 212-220.

范红刚, 史耀武, 黄勇, 等. TIG焊电弧压力影响因素的试验分析 [J]. 焊接技术, 1995(5): 3-5.

孙俊生, 武传松. 熔池表面形状对电弧电流密度分布的影响 [J]. 金属学报, 2000, 49(12): 2427-2432.

SUN Junsheng, WU Chuansong. The influence of weld pool surface shape on the distribution of arc current density [J]. Metallurgica Sinica, 2000, 49(12): 2427-2432.

贾昌申, 殷咸青, 贾涛, 等. 纵向磁场中的焊接电弧行为 [J]. 西安交通大学学报, 1994, 28(4): 7-13.

JIA Changshen, YIN Xianqing, JIA Tao, et al. The behavior of welding arc in longitudinal magnetic-field [J]. Journal of Xi'an Jiaotong University, 1994, 28(4): 7-13.

常云龙, 杨旭, 李大用, 等. 外加纵向磁场作用下的TIG焊接电弧 [J]. 焊接学报, 2010, 31(4): 49-52.

CHANG Yunlong, YANG Xu, LI Dayong, et al. Arc shapes of TIG welding in a longitudinal magnetic field [J]. Transactions of the China Welding Institution, 2010, 31(4): 49-52.

OLSEN H N. Thermal and electrical properties of an argon plasma [J]. The Physics of Fluids, 1959, 2(6): 614-623.

FARMER A J D, HADDAD G N, CRAM L E. Temperature determinations in a free-burning arc: Ⅲ Measurements with molten anodes [J]. Journal of Physics: D Applied Physics, 1986, 19(9): 1723-1730.

HAIDAR J, FARMER A J D. Temperature measurement for high-current free-burning arcs in nitrogen [J]. Journal of Physics: D Applied Physics, 1993, 26(8): 1224-1229.

DGHEIM J. Characterization of an argon plasma jet by the imagery method [J]. Measurement Science and Technology, 2005, 16(8): 1650-1655.

PETERS J, HEBERLEIN J, LINDSAY J. Spectroscopic diagnostics in a highly constricted oxygen arc [J]. Journal of Physics: D Applied Physics, 2007, 40(13): 3960-3971.

MA Shuiliang, GAO Hongming, ZHENG Senmu, et al. Spectroscopic measurement of temperatures in pulsed TIG welding arcs [J]. Journal of Physics: D Applied Physics, 2011, 44(40): 405202-405213.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A Structure-Semantics-Residual Collaborative Image Compression Framework：Towards Privacy Protection and High-Fidelity Reconstruction

Energy Efficiency Optimization of the Cryogenic Air Separation Process for Electronic-Grade Ultra Pure Nitrogen

Effects of Expansion Angle Crater Film Hole on the Film Cooling Characteristics of a Double-Wall Structure

Diffusion Characteristics and Influencing Factors in Case of Hydrogen Leakage from Fuel Cell Vehicles Running in Tunnels

Mechanism and Optimal Control Strategy for Hysteresis in Rapid Dehumidification Response of Indirect Thermal Systems in Electric Vehicles

Related Author

No data

Related Institution

No data

⁰