Kinematic precept of mass block in automatic balancer is proposed following the principle of online automatic dynamic balancing. By combination of electromagnet and permanent magnet
the magnetic circuit of the balancer with ring coil and rare earth permanent magnet is designed. Actuating process of the balancer is discussed and then a step drive voltage waveform is defined. For the high-speed grinding motorized spindle 170MD12Y16
the mechanical structure and dimensions of the balancer are schemed out. The electromagnetic simulations for the designed balancer are conducted and the better coil ampere-turns and reluctance adjusting ring thickness are then determined. The validity of simulation results is verified by a balancer driving experiment and the desired voltage value and its duration time are also determined. the designed balancer has a stable operation process without out-of-step and fluctuation around balanced position when the ampere-turns are considered as 1 kA
the reluctance adjusting ring thickness 0.2 mm
the driving voltage 12.4 V and the voltage duration time 120 ms.
关键词
Keywords
references
VAN DE VEGTE J. Continuous automatic balancing of rotating systems [J]. Journal of Mechanical Engineering Science, 1964, 6(3): 264-269.
VAN DE VEGTE J, LAKE R T. Balancing of rotating systems during operation [J]. Journal of Sound and Vibration, 1978, 57(2): 225-235.
ZHOU Baotang, HE Shizheng, WANG Yu. Study on balancer for online automatic dynamic balancing [J]. Petro-Chemical Equipment Technology, 1994, 15(3): 42-45.
GE Zhexue, TAO Limin. Study on a new electromagnetic automatic-balancing instrument [J]. Machinery, 2001, 28(6): 62-64.
HILDEBRAND S, MILLER L. Rotating machine active balancer and method of dynamically balancing a rotating machine shaft with torsional vibrations: USA, 7717013B2 [P]. 2010-05-18.
DYER S W. Adaptive optimal control of active balancing systems for high-speed rotating machinery [D]. Detroit, USA: University of Michigan, 1999.
MOON J D, KIM B S, LEE S H. Development of the active balancing device for high-speed spindle system using influence coefficients [J]. International Journal of Machine Tools and Manufacture, 2006, 46(9): 978-987.