Kinetic Property Influenced by Clearances in Internal-Meshing Cycloid Rotary Compressor

冯诗愚 1; 高秀峰 1; 胡伟 2; 刘卫华 3; 李云 1; 顾兆林 2

您当前的位置：

首页 >

文章列表页 >

Kinetic Property Influenced by Clearances in Internal-Meshing Cycloid Rotary Compressor

更新时间：2025-12-08

- Kinetic Property Influenced by Clearances in Internal-Meshing Cycloid Rotary Compressor
- Vol. 41, Issue 7, Pages: 797-801(2007)
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： TH45
- Online First：10 July 2007，
  
  Published：2007
- 稿件说明：
移动端阅览
冯诗愚 1, 高秀峰 1, 胡伟 2, et al. Kinetic Property Influenced by Clearances in Internal-Meshing Cycloid Rotary Compressor[J]. 2007, 41(7): 797-801.
DOI：

冯诗愚 1, 高秀峰 1, 胡伟 2, et al. Kinetic Property Influenced by Clearances in Internal-Meshing Cycloid Rotary Compressor[J]. 2007, 41(7): 797-801. DOI：

摘要

在忽略其他间隙的情况下

仅考虑外转子和缸体镜面间隙

分析了该间隙对运动的影响

详细分析了齿间间隙对内外转子的运动及啮合关系变化的作用.采用数值迭代的方法

结合实例计算了一定间隙下

外转子偏转角度、参与啮合的外转子齿号以及实际内转子啮合点发生角.研究结果表明

外转子和缸体镜面间的间隙会造成启动过程中的冲击

而齿间的间隙会导致理想情况下的多点同时啮合运行关系转化为单点啮合.如果认为主轴转速均匀

则齿间间隙会造成外转子转速产生波动.该问题的研究可为非理想情况下的内摆线转子压缩机的受力分析研究打下基础.

Abstract

The kinetic property affected by the clearance between the outer rotor and the cylinder was analyzed with ignoring the influence of other clearances. The influence of the gap between gears was studied in detail. Numerical iterative method was employed in calculation for an example. The deflection angle of the outer rotor

the sequence number of teeth on the outer rotor taking part in the meshing process and the actual generating angle of the inner rotor were obtained. The result shows that the clearance between the outer rotor and cylinder will cause impact effect during the start-up process and the gap between gears will transform the ideal multi-point mesh into the actual one-point mesh. If the rotate speed of the shaft was constant

the gap would cause the speed fluctuation of the outer rotor.

关键词

Keywords

references

郁永章,张旭东. 一种新型全平衡高强度转子式压缩机的几何关系[J].西安交通大学学报,2001,35(11): 1193-1197.

Yu Yongzhang, Zhang Xudong. Geometry relations of a new rotary compressor[J]. Journal of Xi'an Jiaotong University, 2001, 35(11): 1193-1197.

张旭东,郁永章.一种新型全平衡高强度转子式压缩机的受力分析[J].西安交通大学学报,2001, 35(12):1305-1309.

Zhang Xudong, Yu Yongzhang. Mechanical analysis of a new rotary compressor[J]. Journal of Xi'an Jiaotong University, 2001, 35(12): 1305-1309.

顾兆林,郁永章,高秀峰,等.一种制冷系统用转子压缩-膨胀机:中国,ZL02145524.4.[P]. 2003-05-14.

小林昭七.曲线与曲面的微分几何[M]. 北京:机械工业出版社,1984.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Modification of Profile for Internal-Meshing Cycloid Rotary Compressor

Position of Support Force on Cylinder in Internal-Meshing Cycloid Rotary Compressor

Continuity Condition of Profiles for Internal-Meshing Cycloid Rotary Compressor

Numerical Simulation of Heat-Moisture Barrier Performance of a Horizontal Air Curtain in Cold Storage

I/O Performance Modeling and Prediction Method for Large-Scale Parallel Applications Using Machine Learning

Related Author

刘卫华 2

王赞社 1

朱冬生 2

刘卫华 3

顾兆林 3

Related Institution

School of Power and Engineering, Xi'an Jiaotong University

⁰