Dynamic Simulation and Optimization of Hydraulic System for New Directly-Driven Pump Controlling Hydraulic Press

您当前的位置：

首页 >

文章列表页 >

Dynamic Simulation and Optimization of Hydraulic System for New Directly-Driven Pump Controlling Hydraulic Press

更新时间：2025-07-09

- Dynamic Simulation and Optimization of Hydraulic System for New Directly-Driven Pump Controlling Hydraulic Press
- Vol. 43, Issue 7, Pages: 79-82(2009)
- 作者机构：
  
  1. 西安交通大学机械工程学院,西安,710049
  2. 安徽铜陵学院机械工程系,安徽,铜陵,244000
- 作者简介：
- 基金信息：
- DOI：
  CLC： TG385.1
- Online First：10 July 2009，
  
  Published：2009
- 稿件说明：
移动端阅览
Dynamic Simulation and Optimization of Hydraulic System for New Directly-Driven Pump Controlling Hydraulic Press[J]. 2009, 43(7): 79-82.
DOI：

Dynamic Simulation and Optimization of Hydraulic System for New Directly-Driven Pump Controlling Hydraulic Press[J]. 2009, 43(7): 79-82. DOI：

摘要

为了更好地表达液压系统各变量的输入、输出关系

以及更全面地考虑液压系统中的非线性

采用功率键合图建立了直驱泵控式液压机液压系统的数学模型

探讨了直驱泵控式液压机液压系统的负载、管路直径及泵的阻尼对液压系统动态特性的影响规律.同时

以液压缸的出口压力动态响应作为优化目标

用ODE变换法对仿真模型进行了参数优化.研究结果表明:液压系统的管路直径对系统的动态响应有较大的影响

泵的阻尼对液压系统的输出压力及输出速度影响很大.通过参数优化

得出当泵的阻尼为0.031 1时

该液压系统具有较为理想的动态响应.

Abstract

A dynamic mathematic model of the directly-driven hydraulic press hydraulic system is constructed by means of power bond graphs to describe the relationship between input and output and completely consider nonlinearity in hydraulic system. The influences of load

pipe line diameter and pump damping of the hydraulic system on the dynamic characteristics are revealed. Some primary parameters are optimized by means of ODE converter technique based on optimization of dynamic pressure response to outlet of hydraulic cylinder. The results show that hydraulic pipe diameter has great influence on dynamic response of the directly-driven hydraulic system

and pump damping obviously affects output pressure and velocity of the hydraulic system. When the optimized pump damping gets 0.031 1

the hydraulic system performs with better dynamic response.

关键词

Keywords

references

孙友松,张宏超.金属板材加工设备发展新动向 [J].锻压技术,2004(4):1-4.

SUN Yousong, ZHANG Hongchao. Some new trends in metal sheet processing equipments [J]. Forging & Stamping Technology, 2004(4):1-4.

骆再飞,蒋静坪,许振伟.交流伺服系统及其先进控制策略综述 [J].机床与液压,2002(6):7-10.

LUO Zaifei, JIANG Jingping, XU Zhenwei. Overviews of AC servo system and its advanced control strategies [J]. Machine Tool Hydraulics, 2002(6):7-10.

高钦合,黄先祥,郭晓松.机液一体化系统中液压管路动态特性的建模与仿真研究 [J].中国机械工程,2003,14(10):823-825.

GAO Qinhe, HUANG Xianxiang, GUO Xiaosong. Research on dynamic modeling and simulation of fluid-transmission line in hydraulic-driven system [J]. China Mechanical Engineering, 2003,14(10):823-825.

任锦堂. 键图理论及应用 [M].上海:上海交通大学出版社, 1992:170-210.

张立军,赵升吨,刘克铭. 中高压液压缸实验台液压系统仿真及优化 [J].系统仿真学报, 2007,19(3):671-674.

ZHANG Lijun, ZHAO Shengdun, LIU Keming. Simulation and parameter optimization of test platform hydraulic system based on mesohigh cylinder [J]. Journal of System Simulation, 2007,19(3):671-674.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on Dynamic Characteristics and Parameter Influence of Engine's Semi-Active Hydraulic Mount Using AMESim

Torsional Vibration Damping Characteristics of Magneto-Rheological Fluid Dual Mass Flywheel

Effects of Expansion Angle Crater Film Hole on the Film Cooling Characteristics of a Double-Wall Structure

Sensitivity Analysis of Foil Geometrical Parameters for the Third-Generation CO2 Gas Foil Bearings Based on Design of Experiments Method

Windage Loss and Flow Characteristics in Impeller Back Gaps of sCO2 Radial Inflow Turbines

Related Author

史文库 1

毛阳 1

姜雪 1

陈志勇 1

马利红 2

潘斌 2

毛阳

陈志勇

Related Institution

State Key Laboratory of Automotive Simulation and Control, Jilin University

⁰